mcfpit.h

来自「linux 内核源代码」· C头文件 代码 · 共 65 行

H
65
字号
/****************************************************************************//* *	mcfpit.h -- ColdFire internal PIT timer support defines. * *	(C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) *//****************************************************************************/#ifndef	mcfpit_h#define	mcfpit_h/****************************************************************************//* *	Get address specific defines for the 5270/5271, 5280/5282, and 5208. */#if defined(CONFIG_M520x)#define	MCFPIT_BASE1		0x00080000	/* Base address of TIMER1 */#define	MCFPIT_BASE2		0x00084000	/* Base address of TIMER2 */#else#define	MCFPIT_BASE1		0x00150000	/* Base address of TIMER1 */#define	MCFPIT_BASE2		0x00160000	/* Base address of TIMER2 */#define	MCFPIT_BASE3		0x00170000	/* Base address of TIMER3 */#define	MCFPIT_BASE4		0x00180000	/* Base address of TIMER4 */#endif/* *	Define the PIT timer register set addresses. */#define	MCFPIT_PCSR		0x0		/* PIT control register */#define	MCFPIT_PMR		0x2		/* PIT modulus register */#define	MCFPIT_PCNTR		0x4		/* PIT count register *//* *	Bit definitions for the PIT Control and Status register. */#define	MCFPIT_PCSR_CLK1	0x0000		/* System clock divisor */#define	MCFPIT_PCSR_CLK2	0x0100		/* System clock divisor */#define	MCFPIT_PCSR_CLK4	0x0200		/* System clock divisor */#define	MCFPIT_PCSR_CLK8	0x0300		/* System clock divisor */#define	MCFPIT_PCSR_CLK16	0x0400		/* System clock divisor */#define	MCFPIT_PCSR_CLK32	0x0500		/* System clock divisor */#define	MCFPIT_PCSR_CLK64	0x0600		/* System clock divisor */#define	MCFPIT_PCSR_CLK128	0x0700		/* System clock divisor */#define	MCFPIT_PCSR_CLK256	0x0800		/* System clock divisor */#define	MCFPIT_PCSR_CLK512	0x0900		/* System clock divisor */#define	MCFPIT_PCSR_CLK1024	0x0a00		/* System clock divisor */#define	MCFPIT_PCSR_CLK2048	0x0b00		/* System clock divisor */#define	MCFPIT_PCSR_CLK4096	0x0c00		/* System clock divisor */#define	MCFPIT_PCSR_CLK8192	0x0d00		/* System clock divisor */#define	MCFPIT_PCSR_CLK16384	0x0e00		/* System clock divisor */#define	MCFPIT_PCSR_CLK32768	0x0f00		/* System clock divisor */#define	MCFPIT_PCSR_DOZE	0x0040		/* Clock run in doze mode */#define	MCFPIT_PCSR_HALTED	0x0020		/* Clock run in halt mode */#define	MCFPIT_PCSR_OVW		0x0010		/* Overwrite PIT counter now */#define	MCFPIT_PCSR_PIE		0x0008		/* Enable PIT interrupt */#define	MCFPIT_PCSR_PIF		0x0004		/* PIT interrupt flag */#define	MCFPIT_PCSR_RLD		0x0002		/* Reload counter */#define	MCFPIT_PCSR_EN		0x0001		/* Enable PIT */#define	MCFPIT_PCSR_DISABLE	0x0000		/* Disable PIT *//****************************************************************************/#endif	/* mcfpit_h */

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?