hplance.c

来自「linux 内核源代码」· C语言 代码 · 共 237 行

C
237
字号
/* hplance.c  : the  Linux/hp300/lance ethernet driver * * Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk> * Based on the Sun Lance driver and the NetBSD HP Lance driver * Uses the generic 7990.c LANCE code. */#include <linux/module.h>#include <linux/kernel.h>#include <linux/types.h>#include <linux/interrupt.h>#include <linux/ioport.h>#include <linux/slab.h>#include <linux/string.h>#include <linux/delay.h>#include <linux/init.h>#include <linux/errno.h>/* Used for the temporal inet entries and routing */#include <linux/socket.h>#include <linux/route.h>#include <linux/dio.h>#include <linux/netdevice.h>#include <linux/etherdevice.h>#include <linux/skbuff.h>#include <asm/system.h>#include <asm/io.h>#include <asm/pgtable.h>#include "hplance.h"/* We have 16834 bytes of RAM for the init block and buffers. This places * an upper limit on the number of buffers we can use. NetBSD uses 8 Rx * buffers and 2 Tx buffers. */#define LANCE_LOG_TX_BUFFERS 1#define LANCE_LOG_RX_BUFFERS 3#include "7990.h"                                 /* use generic LANCE code *//* Our private data structure */struct hplance_private {	struct lance_private lance;};/* function prototypes... This is easy because all the grot is in the * generic LANCE support. All we have to support is probing for boards, * plus board-specific init, open and close actions. * Oh, and we need to tell the generic code how to read and write LANCE registers... */static int __devinit hplance_init_one(struct dio_dev *d,				const struct dio_device_id *ent);static void __devinit hplance_init(struct net_device *dev,				struct dio_dev *d);static void __devexit hplance_remove_one(struct dio_dev *d);static void hplance_writerap(void *priv, unsigned short value);static void hplance_writerdp(void *priv, unsigned short value);static unsigned short hplance_readrdp(void *priv);static int hplance_open(struct net_device *dev);static int hplance_close(struct net_device *dev);static struct dio_device_id hplance_dio_tbl[] = {	{ DIO_ID_LAN },	{ 0 }};static struct dio_driver hplance_driver = {	.name      = "hplance",	.id_table  = hplance_dio_tbl,	.probe     = hplance_init_one,	.remove    = __devexit_p(hplance_remove_one),};/* Find all the HP Lance boards and initialise them... */static int __devinit hplance_init_one(struct dio_dev *d,				const struct dio_device_id *ent){	struct net_device *dev;	int err = -ENOMEM;	int i;	dev = alloc_etherdev(sizeof(struct hplance_private));	if (!dev)		goto out;	err = -EBUSY;	if (!request_mem_region(dio_resource_start(d),				dio_resource_len(d), d->name))		goto out_free_netdev;	hplance_init(dev, d);	err = register_netdev(dev);	if (err)		goto out_release_mem_region;	dio_set_drvdata(d, dev);	printk(KERN_INFO "%s: %s; select code %d, addr %2.2x", dev->name, d->name, d->scode, dev->dev_addr[0]);	for (i=1; i<6; i++) {		printk(":%2.2x", dev->dev_addr[i]);	}	printk(", irq %d\n", d->ipl);	return 0; out_release_mem_region:	release_mem_region(dio_resource_start(d), dio_resource_len(d)); out_free_netdev:	free_netdev(dev); out:	return err;}static void __devexit hplance_remove_one(struct dio_dev *d){	struct net_device *dev = dio_get_drvdata(d);	unregister_netdev(dev);	release_mem_region(dio_resource_start(d), dio_resource_len(d));	free_netdev(dev);}/* Initialise a single lance board at the given DIO device */static void __init hplance_init(struct net_device *dev, struct dio_dev *d){        unsigned long va = (d->resource.start + DIO_VIRADDRBASE);        struct hplance_private *lp;        int i;        /* reset the board */        out_8(va+DIO_IDOFF, 0xff);        udelay(100);                              /* ariba! ariba! udelay! udelay! */        /* Fill the dev fields */        dev->base_addr = va;        dev->open = &hplance_open;        dev->stop = &hplance_close;#ifdef CONFIG_NET_POLL_CONTROLLER        dev->poll_controller = lance_poll;#endif        dev->hard_start_xmit = &lance_start_xmit;        dev->set_multicast_list = &lance_set_multicast;        dev->dma = 0;        for (i=0; i<6; i++) {                /* The NVRAM holds our ethernet address, one nibble per byte,                 * at bytes NVRAMOFF+1,3,5,7,9...                 */                dev->dev_addr[i] = ((in_8(va + HPLANCE_NVRAMOFF + i*4 + 1) & 0xF) << 4)                        | (in_8(va + HPLANCE_NVRAMOFF + i*4 + 3) & 0xF);        }        lp = netdev_priv(dev);        lp->lance.name = (char*)d->name;                /* discards const, shut up gcc */        lp->lance.base = va;        lp->lance.init_block = (struct lance_init_block *)(va + HPLANCE_MEMOFF); /* CPU addr */        lp->lance.lance_init_block = NULL;              /* LANCE addr of same RAM */        lp->lance.busmaster_regval = LE_C3_BSWP;        /* we're bigendian */        lp->lance.irq = d->ipl;        lp->lance.writerap = hplance_writerap;        lp->lance.writerdp = hplance_writerdp;        lp->lance.readrdp = hplance_readrdp;        lp->lance.lance_log_rx_bufs = LANCE_LOG_RX_BUFFERS;        lp->lance.lance_log_tx_bufs = LANCE_LOG_TX_BUFFERS;        lp->lance.rx_ring_mod_mask = RX_RING_MOD_MASK;        lp->lance.tx_ring_mod_mask = TX_RING_MOD_MASK;}/* This is disgusting. We have to check the DIO status register for ack every * time we read or write the LANCE registers. */static void hplance_writerap(void *priv, unsigned short value){	struct lance_private *lp = (struct lance_private *)priv;	do {		out_be16(lp->base + HPLANCE_REGOFF + LANCE_RAP, value);	} while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);}static void hplance_writerdp(void *priv, unsigned short value){	struct lance_private *lp = (struct lance_private *)priv;	do {		out_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP, value);	} while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);}static unsigned short hplance_readrdp(void *priv){	struct lance_private *lp = (struct lance_private *)priv;	__u16 value;	do {		value = in_be16(lp->base + HPLANCE_REGOFF + LANCE_RDP);	} while ((in_8(lp->base + HPLANCE_STATUS) & LE_ACK) == 0);	return value;}static int hplance_open(struct net_device *dev){        int status;        struct lance_private *lp = netdev_priv(dev);        status = lance_open(dev);                 /* call generic lance open code */        if (status)                return status;        /* enable interrupts at board level. */        out_8(lp->base + HPLANCE_STATUS, LE_IE);        return 0;}static int hplance_close(struct net_device *dev){        struct lance_private *lp = netdev_priv(dev);        out_8(lp->base + HPLANCE_STATUS, 0);	/* disable interrupts at boardlevel */        lance_close(dev);        return 0;}int __init hplance_init_module(void){	return dio_register_driver(&hplance_driver);}void __exit hplance_cleanup_module(void){        dio_unregister_driver(&hplance_driver);}module_init(hplance_init_module);module_exit(hplance_cleanup_module);MODULE_LICENSE("GPL");

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?