mc5.c

来自「linux 内核源代码」· C语言 代码 · 共 477 行

/*
 * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * OpenIB.org BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
#include "common.h"
#include "regs.h"

enum {
	IDT75P52100 = 4,
	IDT75N43102 = 5
};

/* DBGI command mode */
enum {
	DBGI_MODE_MBUS = 0,
	DBGI_MODE_IDT52100 = 5
};

/* IDT 75P52100 commands */
#define IDT_CMD_READ   0
#define IDT_CMD_WRITE  1
#define IDT_CMD_SEARCH 2
#define IDT_CMD_LEARN  3

/* IDT LAR register address and value for 144-bit mode (low 32 bits) */
#define IDT_LAR_ADR0   	0x180006
#define IDT_LAR_MODE144	0xffff0000

/* IDT SCR and SSR addresses (low 32 bits) */
#define IDT_SCR_ADR0  0x180000
#define IDT_SSR0_ADR0 0x180002
#define IDT_SSR1_ADR0 0x180004

/* IDT GMR base address (low 32 bits) */
#define IDT_GMR_BASE_ADR0 0x180020

/* IDT data and mask array base addresses (low 32 bits) */
#define IDT_DATARY_BASE_ADR0 0
#define IDT_MSKARY_BASE_ADR0 0x80000

/* IDT 75N43102 commands */
#define IDT4_CMD_SEARCH144 3
#define IDT4_CMD_WRITE     4
#define IDT4_CMD_READ      5

/* IDT 75N43102 SCR address (low 32 bits) */
#define IDT4_SCR_ADR0  0x3

/* IDT 75N43102 GMR base addresses (low 32 bits) */
#define IDT4_GMR_BASE0 0x10
#define IDT4_GMR_BASE1 0x20
#define IDT4_GMR_BASE2 0x30

/* IDT 75N43102 data and mask array base addresses (low 32 bits) */
#define IDT4_DATARY_BASE_ADR0 0x1000000
#define IDT4_MSKARY_BASE_ADR0 0x2000000

#define MAX_WRITE_ATTEMPTS 5

#define MAX_ROUTES 2048

/*
 * Issue a command to the TCAM and wait for its completion.  The address and
 * any data required by the command must have been setup by the caller.
 */
static int mc5_cmd_write(struct adapter *adapter, u32 cmd)
{
	t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_CMD, cmd);
	return t3_wait_op_done(adapter, A_MC5_DB_DBGI_RSP_STATUS,
			       F_DBGIRSPVALID, 1, MAX_WRITE_ATTEMPTS, 1);
}

static inline void dbgi_wr_addr3(struct adapter *adapter, u32 v1, u32 v2,
				 u32 v3)
{
	t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, v1);
	t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR1, v2);
	t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR2, v3);
}

static inline void dbgi_wr_data3(struct adapter *adapter, u32 v1, u32 v2,
				 u32 v3)
{
	t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA0, v1);
	t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA1, v2);
	t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA2, v3);
}

static inline void dbgi_rd_rsp3(struct adapter *adapter, u32 *v1, u32 *v2,
				u32 *v3)
{
	*v1 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA0);
	*v2 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA1);
	*v3 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA2);
}

/*
 * Write data to the TCAM register at address (0, 0, addr_lo) using the TCAM
 * command cmd.  The data to be written must have been set up by the caller.
 * Returns -1 on failure, 0 on success.
 */
static int mc5_write(struct adapter *adapter, u32 addr_lo, u32 cmd)
{
	t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, addr_lo);
	if (mc5_cmd_write(adapter, cmd) == 0)
		return 0;
	CH_ERR(adapter, "MC5 timeout writing to TCAM address 0x%x\n",
	       addr_lo);
	return -1;
}

static int init_mask_data_array(struct mc5 *mc5, u32 mask_array_base,
				u32 data_array_base, u32 write_cmd,
				int addr_shift)
{
	unsigned int i;
	struct adapter *adap = mc5->adapter;

	/*
	 * We need the size of the TCAM data and mask arrays in terms of
	 * 72-bit entries.
	 */
	unsigned int size72 = mc5->tcam_size;
	unsigned int server_base = t3_read_reg(adap, A_MC5_DB_SERVER_INDEX);

	if (mc5->mode == MC5_MODE_144_BIT) {
		size72 *= 2;	/* 1 144-bit entry is 2 72-bit entries */
		server_base *= 2;
	}

	/* Clear the data array */
	dbgi_wr_data3(adap, 0, 0, 0);
	for (i = 0; i < size72; i++)
		if (mc5_write(adap, data_array_base + (i << addr_shift),
			      write_cmd))
			return -1;

	/* Initialize the mask array. */
	dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
	for (i = 0; i < size72; i++) {
		if (i == server_base)	/* entering server or routing region */
			t3_write_reg(adap, A_MC5_DB_DBGI_REQ_DATA0,
				     mc5->mode == MC5_MODE_144_BIT ?
				     0xfffffff9 : 0xfffffffd);
		if (mc5_write(adap, mask_array_base + (i << addr_shift),
			      write_cmd))
			return -1;
	}
	return 0;
}

static int init_idt52100(struct mc5 *mc5)
{
	int i;
	struct adapter *adap = mc5->adapter;

	t3_write_reg(adap, A_MC5_DB_RSP_LATENCY,
		     V_RDLAT(0x15) | V_LRNLAT(0x15) | V_SRCHLAT(0x15));
	t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 2);

	/*
	 * Use GMRs 14-15 for ELOOKUP, GMRs 12-13 for SYN lookups, and
	 * GMRs 8-9 for ACK- and AOPEN searches.
	 */
	t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT_CMD_WRITE);
	t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT_CMD_WRITE);
	t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, IDT_CMD_SEARCH);
	t3_write_reg(adap, A_MC5_DB_AOPEN_LRN_CMD, IDT_CMD_LEARN);
	t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT_CMD_SEARCH | 0x6000);
	t3_write_reg(adap, A_MC5_DB_SYN_LRN_CMD, IDT_CMD_LEARN);
	t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT_CMD_SEARCH);
	t3_write_reg(adap, A_MC5_DB_ACK_LRN_CMD, IDT_CMD_LEARN);
	t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT_CMD_SEARCH);
	t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT_CMD_SEARCH | 0x7000);
	t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT_CMD_WRITE);
	t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT_CMD_READ);

	/* Set DBGI command mode for IDT TCAM. */
	t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100);

	/* Set up LAR */
	dbgi_wr_data3(adap, IDT_LAR_MODE144, 0, 0);
	if (mc5_write(adap, IDT_LAR_ADR0, IDT_CMD_WRITE))
		goto err;

	/* Set up SSRs */
	dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0);
	if (mc5_write(adap, IDT_SSR0_ADR0, IDT_CMD_WRITE) ||
	    mc5_write(adap, IDT_SSR1_ADR0, IDT_CMD_WRITE))
		goto err;

	/* Set up GMRs */
	for (i = 0; i < 32; ++i) {
		if (i >= 12 && i < 15)
			dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff);
		else if (i == 15)
			dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff);
		else
			dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);

		if (mc5_write(adap, IDT_GMR_BASE_ADR0 + i, IDT_CMD_WRITE))
			goto err;
	}

	/* Set up SCR */
	dbgi_wr_data3(adap, 1, 0, 0);
	if (mc5_write(adap, IDT_SCR_ADR0, IDT_CMD_WRITE))
		goto err;

	return init_mask_data_array(mc5, IDT_MSKARY_BASE_ADR0,
				    IDT_DATARY_BASE_ADR0, IDT_CMD_WRITE, 0);
err:
	return -EIO;
}

static int init_idt43102(struct mc5 *mc5)
{
	int i;
	struct adapter *adap = mc5->adapter;

	t3_write_reg(adap, A_MC5_DB_RSP_LATENCY,
		     adap->params.rev == 0 ? V_RDLAT(0xd) | V_SRCHLAT(0x11) :
		     V_RDLAT(0xd) | V_SRCHLAT(0x12));

	/*
	 * Use GMRs 24-25 for ELOOKUP, GMRs 20-21 for SYN lookups, and no mask
	 * for ACK- and AOPEN searches.
	 */
	t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT4_CMD_WRITE);
	t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT4_CMD_WRITE);
	t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD,
		     IDT4_CMD_SEARCH144 | 0x3800);
	t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT4_CMD_SEARCH144);
	t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT4_CMD_SEARCH144 | 0x3800);
	t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x3800);
	t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x800);
	t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT4_CMD_WRITE);
	t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT4_CMD_READ);

	t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 3);

	/* Set DBGI command mode for IDT TCAM. */
	t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100);

	/* Set up GMRs */
	dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
	for (i = 0; i < 7; ++i)
		if (mc5_write(adap, IDT4_GMR_BASE0 + i, IDT4_CMD_WRITE))
			goto err;

	for (i = 0; i < 4; ++i)
		if (mc5_write(adap, IDT4_GMR_BASE2 + i, IDT4_CMD_WRITE))
			goto err;

	dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff);
	if (mc5_write(adap, IDT4_GMR_BASE1, IDT4_CMD_WRITE) ||
	    mc5_write(adap, IDT4_GMR_BASE1 + 1, IDT4_CMD_WRITE) ||
	    mc5_write(adap, IDT4_GMR_BASE1 + 4, IDT4_CMD_WRITE))
		goto err;

	dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff);
	if (mc5_write(adap, IDT4_GMR_BASE1 + 5, IDT4_CMD_WRITE))
		goto err;

	/* Set up SCR */
	dbgi_wr_data3(adap, 0xf0000000, 0, 0);
	if (mc5_write(adap, IDT4_SCR_ADR0, IDT4_CMD_WRITE))
		goto err;

	return init_mask_data_array(mc5, IDT4_MSKARY_BASE_ADR0,
				    IDT4_DATARY_BASE_ADR0, IDT4_CMD_WRITE, 1);
err:
	return -EIO;
}

/* Put MC5 in DBGI mode. */
static inline void mc5_dbgi_mode_enable(const struct mc5 *mc5)
{
	t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG,
		     V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_DBGIEN);
}

/* Put MC5 in M-Bus mode. */
static void mc5_dbgi_mode_disable(const struct mc5 *mc5)
{
	t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG,
		     V_TMMODE(mc5->mode == MC5_MODE_72_BIT) |
		     V_COMPEN(mc5->mode == MC5_MODE_72_BIT) |
		     V_PRTYEN(mc5->parity_enabled) | F_MBUSEN);
}

/*
 * Initialization that requires the OS and protocol layers to already
 * be intialized goes here.
 */
int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
		unsigned int nroutes)
{
	u32 cfg;
	int err;
	unsigned int tcam_size = mc5->tcam_size;
	struct adapter *adap = mc5->adapter;

	if (!tcam_size)
		return 0;

	if (nroutes > MAX_ROUTES || nroutes + nservers + nfilters > tcam_size)
		return -EINVAL;

	/* Reset the TCAM */
	cfg = t3_read_reg(adap, A_MC5_DB_CONFIG) & ~F_TMMODE;
	cfg |= V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_TMRST;
	t3_write_reg(adap, A_MC5_DB_CONFIG, cfg);
	if (t3_wait_op_done(adap, A_MC5_DB_CONFIG, F_TMRDY, 1, 500, 0)) {
		CH_ERR(adap, "TCAM reset timed out\n");
		return -1;
	}

	t3_write_reg(adap, A_MC5_DB_ROUTING_TABLE_INDEX, tcam_size - nroutes);
	t3_write_reg(adap, A_MC5_DB_FILTER_TABLE,
		     tcam_size - nroutes - nfilters);
	t3_write_reg(adap, A_MC5_DB_SERVER_INDEX,
		     tcam_size - nroutes - nfilters - nservers);

	mc5->parity_enabled = 1;

	/* All the TCAM addresses we access have only the low 32 bits non 0 */
	t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR1, 0);
	t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR2, 0);

	mc5_dbgi_mode_enable(mc5);

	switch (mc5->part_type) {
	case IDT75P52100:
		err = init_idt52100(mc5);
		break;
	case IDT75N43102:
		err = init_idt43102(mc5);
		break;
	default:
		CH_ERR(adap, "Unsupported TCAM type %d\n", mc5->part_type);
		err = -EINVAL;
		break;
	}

	mc5_dbgi_mode_disable(mc5);
	return err;
}

/*
 *	read_mc5_range - dump a part of the memory managed by MC5
 *	@mc5: the MC5 handle
 *	@start: the start address for the dump
 *	@n: number of 72-bit words to read
 *	@buf: result buffer
 *
 *	Read n 72-bit words from MC5 memory from the given start location.
 */
int t3_read_mc5_range(const struct mc5 *mc5, unsigned int start,
		      unsigned int n, u32 *buf)
{
	u32 read_cmd;
	int err = 0;
	struct adapter *adap = mc5->adapter;

	if (mc5->part_type == IDT75P52100)
		read_cmd = IDT_CMD_READ;
	else if (mc5->part_type == IDT75N43102)
		read_cmd = IDT4_CMD_READ;
	else
		return -EINVAL;

	mc5_dbgi_mode_enable(mc5);

	while (n--) {
		t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR0, start++);
		if (mc5_cmd_write(adap, read_cmd)) {
			err = -EIO;
			break;
		}
		dbgi_rd_rsp3(adap, buf + 2, buf + 1, buf);
		buf += 3;
	}

	mc5_dbgi_mode_disable(mc5);
	return 0;
}

#define MC5_INT_FATAL (F_PARITYERR | F_REQQPARERR | F_DISPQPARERR)

/*
 * MC5 interrupt handler
 */
void t3_mc5_intr_handler(struct mc5 *mc5)
{
	struct adapter *adap = mc5->adapter;
	u32 cause = t3_read_reg(adap, A_MC5_DB_INT_CAUSE);

	if ((cause & F_PARITYERR) && mc5->parity_enabled) {
		CH_ALERT(adap, "MC5 parity error\n");
		mc5->stats.parity_err++;
	}

	if (cause & F_REQQPARERR) {
		CH_ALERT(adap, "MC5 request queue parity error\n");
		mc5->stats.reqq_parity_err++;
	}

	if (cause & F_DISPQPARERR) {
		CH_ALERT(adap, "MC5 dispatch queue parity error\n");
		mc5->stats.dispq_parity_err++;
	}

	if (cause & F_ACTRGNFULL)
		mc5->stats.active_rgn_full++;
	if (cause & F_NFASRCHFAIL)
		mc5->stats.nfa_srch_err++;
	if (cause & F_UNKNOWNCMD)
		mc5->stats.unknown_cmd++;
	if (cause & F_DELACTEMPTY)
		mc5->stats.del_act_empty++;
	if (cause & MC5_INT_FATAL)
		t3_fatal_err(adap);

	t3_write_reg(adap, A_MC5_DB_INT_CAUSE, cause);
}

void __devinit t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode)
{
#define K * 1024

	static unsigned int tcam_part_size[] = {	/* in K 72-bit entries */
		64 K, 128 K, 256 K, 32 K
	};

#undef K

	u32 cfg = t3_read_reg(adapter, A_MC5_DB_CONFIG);

	mc5->adapter = adapter;
	mc5->mode = (unsigned char)mode;
	mc5->part_type = (unsigned char)G_TMTYPE(cfg);
	if (cfg & F_TMTYPEHI)
		mc5->part_type |= 4;

	mc5->tcam_size = tcam_part_size[G_TMPARTSIZE(cfg)];
	if (mode == MC5_MODE_144_BIT)
		mc5->tcam_size /= 2;
}