📄 ppp_mppe.h
字号:
#define MPPE_PAD 4 /* MPPE growth per frame */#define MPPE_MAX_KEY_LEN 16 /* largest key length (128-bit) *//* option bits for ccp_options.mppe */#define MPPE_OPT_40 0x01 /* 40 bit */#define MPPE_OPT_128 0x02 /* 128 bit */#define MPPE_OPT_STATEFUL 0x04 /* stateful mode *//* unsupported opts */#define MPPE_OPT_56 0x08 /* 56 bit */#define MPPE_OPT_MPPC 0x10 /* MPPC compression */#define MPPE_OPT_D 0x20 /* Unknown */#define MPPE_OPT_UNSUPPORTED (MPPE_OPT_56|MPPE_OPT_MPPC|MPPE_OPT_D)#define MPPE_OPT_UNKNOWN 0x40 /* Bits !defined in RFC 3078 were set *//* * This is not nice ... the alternative is a bitfield struct though. * And unfortunately, we cannot share the same bits for the option * names above since C and H are the same bit. We could do a u_int32 * but then we have to do a htonl() all the time and/or we still need * to know which octet is which. */#define MPPE_C_BIT 0x01 /* MPPC */#define MPPE_D_BIT 0x10 /* Obsolete, usage unknown */#define MPPE_L_BIT 0x20 /* 40-bit */#define MPPE_S_BIT 0x40 /* 128-bit */#define MPPE_M_BIT 0x80 /* 56-bit, not supported */#define MPPE_H_BIT 0x01 /* Stateless (in a different byte) *//* Does not include H bit; used for least significant octet only. */#define MPPE_ALL_BITS (MPPE_D_BIT|MPPE_L_BIT|MPPE_S_BIT|MPPE_M_BIT|MPPE_H_BIT)/* Build a CI from mppe opts (see RFC 3078) */#define MPPE_OPTS_TO_CI(opts, ci) \ do { \ u_char *ptr = ci; /* u_char[4] */ \ \ /* H bit */ \ if (opts & MPPE_OPT_STATEFUL) \ *ptr++ = 0x0; \ else \ *ptr++ = MPPE_H_BIT; \ *ptr++ = 0; \ *ptr++ = 0; \ \ /* S,L bits */ \ *ptr = 0; \ if (opts & MPPE_OPT_128) \ *ptr |= MPPE_S_BIT; \ if (opts & MPPE_OPT_40) \ *ptr |= MPPE_L_BIT; \ /* M,D,C bits not supported */ \ } while (/* CONSTCOND */ 0)/* The reverse of the above */#define MPPE_CI_TO_OPTS(ci, opts) \ do { \ u_char *ptr = ci; /* u_char[4] */ \ \ opts = 0; \ \ /* H bit */ \ if (!(ptr[0] & MPPE_H_BIT)) \ opts |= MPPE_OPT_STATEFUL; \ \ /* S,L bits */ \ if (ptr[3] & MPPE_S_BIT) \ opts |= MPPE_OPT_128; \ if (ptr[3] & MPPE_L_BIT) \ opts |= MPPE_OPT_40; \ \ /* M,D,C bits */ \ if (ptr[3] & MPPE_M_BIT) \ opts |= MPPE_OPT_56; \ if (ptr[3] & MPPE_D_BIT) \ opts |= MPPE_OPT_D; \ if (ptr[3] & MPPE_C_BIT) \ opts |= MPPE_OPT_MPPC; \ \ /* Other bits */ \ if (ptr[0] & ~MPPE_H_BIT) \ opts |= MPPE_OPT_UNKNOWN; \ if (ptr[1] || ptr[2]) \ opts |= MPPE_OPT_UNKNOWN; \ if (ptr[3] & ~MPPE_ALL_BITS) \ opts |= MPPE_OPT_UNKNOWN; \ } while (/* CONSTCOND */ 0)
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -