ni65.c

linux 内核源代码

/*
 * ni6510 (am7990 'lance' chip) driver for Linux-net-3
 * BETAcode v0.71 (96/09/29) for 2.0.0 (or later)
 * copyrights (c) 1994,1995,1996 by M.Hipp
 *
 * This driver can handle the old ni6510 board and the newer ni6510
 * EtherBlaster. (probably it also works with every full NE2100
 * compatible card)
 *
 * To compile as module, type:
 *     gcc -O2 -fomit-frame-pointer -m486 -D__KERNEL__ -DMODULE -c ni65.c
 * driver probes: io: 0x360,0x300,0x320,0x340 / dma: 3,5,6,7
 *
 * This is an extension to the Linux operating system, and is covered by the
 * same GNU General Public License that covers the Linux-kernel.
 *
 * comments/bugs/suggestions can be sent to:
 *   Michael Hipp
 *   email: [e-mail]
 *
 * sources:
 *   some things are from the 'ni6510-packet-driver for dos by Russ Nelson'
 *   and from the original drivers by D.Becker
 *
 * known problems:
 *   - on some PCI boards (including my own) the card/board/ISA-bridge has
 *     problems with bus master DMA. This results in lotsa overruns.
 *     It may help to '#define RCV_PARANOIA_CHECK' or try to #undef
 *     the XMT and RCV_VIA_SKB option .. this reduces driver performance.
 *     Or just play with your BIOS options to optimize ISA-DMA access.
 *     Maybe you also wanna play with the LOW_PERFORAMCE and MID_PERFORMANCE
 *     defines -> please report me your experience then
 *   - Harald reported for ASUS SP3G mainboards, that you should use
 *     the 'optimal settings' from the user's manual on page 3-12!
 *
 * credits:
 *   thanx to Jason Sullivan for sending me a ni6510 card!
 *   lot of debug runs with ASUS SP3G Boards (Intel Saturn) by Harald Koenig
 *
 * simple performance test: (486DX-33/Ni6510-EB receives from 486DX4-100/Ni6510-EB)
 *    average: FTP -> 8384421 bytes received in 8.5 seconds
 *           (no RCV_VIA_SKB,no XMT_VIA_SKB,PARANOIA_CHECK,4 XMIT BUFS, 8 RCV_BUFFS)
 *    peak: FTP -> 8384421 bytes received in 7.5 seconds
 *           (RCV_VIA_SKB,XMT_VIA_SKB,no PARANOIA_CHECK,1(!) XMIT BUF, 16 RCV BUFFS)
 */

/*
 * 99.Jun.8: added support for /proc/net/dev byte count for xosview (HK)
 * 96.Sept.29: virt_to_bus stuff added for new memory modell
 * 96.April.29: Added Harald Koenig's Patches (MH)
 * 96.April.13: enhanced error handling .. more tests (MH)
 * 96.April.5/6: a lot of performance tests. Got it stable now (hopefully) (MH)
 * 96.April.1: (no joke ;) .. added EtherBlaster and Module support (MH)
 * 96.Feb.19: fixed a few bugs .. cleanups .. tested for 1.3.66 (MH)
 *            hopefully no more 16MB limit
 *
 * 95.Nov.18: multicast tweaked (AC).
 *
 * 94.Aug.22: changes in xmit_intr (ack more than one xmitted-packet), ni65_send_packet (p->lock) (MH)
 *
 * 94.July.16: fixed bugs in recv_skb and skb-alloc stuff  (MH)
 */

#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/module.h>
#include <linux/bitops.h>

#include <asm/io.h>
#include <asm/dma.h>

#include "ni65.h"

/*
 * the current setting allows an acceptable performance
 * for 'RCV_PARANOIA_CHECK' read the 'known problems' part in
 * the header of this file
 * 'invert' the defines for max. performance. This may cause DMA problems
 * on some boards (e.g on my ASUS SP3G)
 */
#undef XMT_VIA_SKB
#undef RCV_VIA_SKB
#define RCV_PARANOIA_CHECK

#define MID_PERFORMANCE

#if   defined( LOW_PERFORMANCE )
 static int isa0=7,isa1=7,csr80=0x0c10;
#elif defined( MID_PERFORMANCE )
 static int isa0=5,isa1=5,csr80=0x2810;
#else	/* high performance */
 static int isa0=4,isa1=4,csr80=0x0017;
#endif

/*
 * a few card/vendor specific defines
 */
#define NI65_ID0    0x00
#define NI65_ID1    0x55
#define NI65_EB_ID0 0x52
#define NI65_EB_ID1 0x44
#define NE2100_ID0  0x57
#define NE2100_ID1  0x57

#define PORT p->cmdr_addr

/*
 * buffer configuration
 */
#if 1
#define RMDNUM 16
#define RMDNUMMASK 0x80000000
#else
#define RMDNUM 8
#define RMDNUMMASK 0x60000000 /* log2(RMDNUM)<<29 */
#endif

#if 0
#define TMDNUM 1
#define TMDNUMMASK 0x00000000
#else
#define TMDNUM 4
#define TMDNUMMASK 0x40000000 /* log2(TMDNUM)<<29 */
#endif

/* slightly oversized */
#define R_BUF_SIZE 1544
#define T_BUF_SIZE 1544

/*
 * lance register defines
 */
#define L_DATAREG 0x00
#define L_ADDRREG 0x02
#define L_RESET   0x04
#define L_CONFIG  0x05
#define L_BUSIF   0x06

/*
 * to access the lance/am7990-regs, you have to write
 * reg-number into L_ADDRREG, then you can access it using L_DATAREG
 */
#define CSR0  0x00
#define CSR1  0x01
#define CSR2  0x02
#define CSR3  0x03

#define INIT_RING_BEFORE_START	0x1
#define FULL_RESET_ON_ERROR	0x2

#if 0
#define writereg(val,reg) {outw(reg,PORT+L_ADDRREG);inw(PORT+L_ADDRREG); \
                           outw(val,PORT+L_DATAREG);inw(PORT+L_DATAREG);}
#define readreg(reg) (outw(reg,PORT+L_ADDRREG),inw(PORT+L_ADDRREG),\
                       inw(PORT+L_DATAREG))
#if 0
#define writedatareg(val) {outw(val,PORT+L_DATAREG);inw(PORT+L_DATAREG);}
#else
#define writedatareg(val) {  writereg(val,CSR0); }
#endif
#else
#define writereg(val,reg) {outw(reg,PORT+L_ADDRREG);outw(val,PORT+L_DATAREG);}
#define readreg(reg) (outw(reg,PORT+L_ADDRREG),inw(PORT+L_DATAREG))
#define writedatareg(val) { writereg(val,CSR0); }
#endif

static unsigned char ni_vendor[] = { 0x02,0x07,0x01 };

static struct card {
	unsigned char id0,id1;
	short id_offset;
	short total_size;
	short cmd_offset;
	short addr_offset;
	unsigned char *vendor_id;
	char *cardname;
	unsigned long config;
} cards[] = {
	{
		.id0	     = NI65_ID0,
		.id1	     = NI65_ID1,
		.id_offset   = 0x0e,
		.total_size  = 0x10,
		.cmd_offset  = 0x0,
		.addr_offset = 0x8,
		.vendor_id   = ni_vendor,
		.cardname    = "ni6510",
		.config	     = 0x1,
       	},
	{
		.id0	     = NI65_EB_ID0,
		.id1	     = NI65_EB_ID1,
		.id_offset   = 0x0e,
		.total_size  = 0x18,
		.cmd_offset  = 0x10,
		.addr_offset = 0x0,
		.vendor_id   = ni_vendor,
		.cardname    = "ni6510 EtherBlaster",
		.config	     = 0x2,
       	},
	{
		.id0	     = NE2100_ID0,
		.id1	     = NE2100_ID1,
		.id_offset   = 0x0e,
		.total_size  = 0x18,
		.cmd_offset  = 0x10,
		.addr_offset = 0x0,
		.vendor_id   = NULL,
		.cardname    = "generic NE2100",
		.config	     = 0x0,
	},
};
#define NUM_CARDS 3

struct priv
{
	struct rmd rmdhead[RMDNUM];
	struct tmd tmdhead[TMDNUM];
	struct init_block ib;
	int rmdnum;
	int tmdnum,tmdlast;
#ifdef RCV_VIA_SKB
	struct sk_buff *recv_skb[RMDNUM];
#else
	void *recvbounce[RMDNUM];
#endif
#ifdef XMT_VIA_SKB
	struct sk_buff *tmd_skb[TMDNUM];
#endif
	void *tmdbounce[TMDNUM];
	int tmdbouncenum;
	int lock,xmit_queued;
	struct net_device_stats stats;
	void *self;
	int cmdr_addr;
	int cardno;
	int features;
	spinlock_t ring_lock;
};

static int  ni65_probe1(struct net_device *dev,int);
static irqreturn_t ni65_interrupt(int irq, void * dev_id);
static void ni65_recv_intr(struct net_device *dev,int);
static void ni65_xmit_intr(struct net_device *dev,int);
static int  ni65_open(struct net_device *dev);
static int  ni65_lance_reinit(struct net_device *dev);
static void ni65_init_lance(struct priv *p,unsigned char*,int,int);
static int  ni65_send_packet(struct sk_buff *skb, struct net_device *dev);
static void  ni65_timeout(struct net_device *dev);
static int  ni65_close(struct net_device *dev);
static int  ni65_alloc_buffer(struct net_device *dev);
static void ni65_free_buffer(struct priv *p);
static struct net_device_stats *ni65_get_stats(struct net_device *);
static void set_multicast_list(struct net_device *dev);

static int irqtab[] __initdata = { 9,12,15,5 }; /* irq config-translate */
static int dmatab[] __initdata = { 0,3,5,6,7 }; /* dma config-translate and autodetect */

static int debuglevel = 1;

/*
 * set 'performance' registers .. we must STOP lance for that
 */
static void ni65_set_performance(struct priv *p)
{
	writereg(CSR0_STOP | CSR0_CLRALL,CSR0); /* STOP */

	if( !(cards[p->cardno].config & 0x02) )
		return;

	outw(80,PORT+L_ADDRREG);
	if(inw(PORT+L_ADDRREG) != 80)
		return;

	writereg( (csr80 & 0x3fff) ,80); /* FIFO watermarks */
	outw(0,PORT+L_ADDRREG);
	outw((short)isa0,PORT+L_BUSIF); /* write ISA 0: DMA_R : isa0 * 50ns */
	outw(1,PORT+L_ADDRREG);
	outw((short)isa1,PORT+L_BUSIF); /* write ISA 1: DMA_W : isa1 * 50ns	*/

	outw(CSR0,PORT+L_ADDRREG);	/* switch back to CSR0 */
}

/*
 * open interface (up)
 */
static int ni65_open(struct net_device *dev)
{
	struct priv *p = (struct priv *) dev->priv;
	int irqval = request_irq(dev->irq, &ni65_interrupt,0,
                        cards[p->cardno].cardname,dev);
	if (irqval) {
		printk(KERN_ERR "%s: unable to get IRQ %d (irqval=%d).\n",
		          dev->name,dev->irq, irqval);
		return -EAGAIN;
	}

	if(ni65_lance_reinit(dev))
	{
		netif_start_queue(dev);
		return 0;
	}
	else
	{
		free_irq(dev->irq,dev);
		return -EAGAIN;
	}
}

/*
 * close interface (down)
 */
static int ni65_close(struct net_device *dev)
{
	struct priv *p = (struct priv *) dev->priv;

	netif_stop_queue(dev);

	outw(inw(PORT+L_RESET),PORT+L_RESET); /* that's the hard way */

#ifdef XMT_VIA_SKB
	{
		int i;
		for(i=0;i<TMDNUM;i++)
		{
			if(p->tmd_skb[i]) {
				dev_kfree_skb(p->tmd_skb[i]);
				p->tmd_skb[i] = NULL;
			}
		}
	}
#endif
	free_irq(dev->irq,dev);
	return 0;
}

static void cleanup_card(struct net_device *dev)
{
	struct priv *p = (struct priv *) dev->priv;
	disable_dma(dev->dma);
	free_dma(dev->dma);
	release_region(dev->base_addr, cards[p->cardno].total_size);
	ni65_free_buffer(p);
}

/* set: io,irq,dma or set it when calling insmod */
static int irq;
static int io;
static int dma;

/*
 * Probe The Card (not the lance-chip)
 */
struct net_device * __init ni65_probe(int unit)
{
	struct net_device *dev = alloc_etherdev(0);
	static int ports[] = {0x360,0x300,0x320,0x340, 0};
	int *port;
	int err = 0;

	if (!dev)
		return ERR_PTR(-ENOMEM);

	if (unit >= 0) {
		sprintf(dev->name, "eth%d", unit);
		netdev_boot_setup_check(dev);
		irq = dev->irq;
		dma = dev->dma;
	} else {
		dev->base_addr = io;
	}

	if (dev->base_addr > 0x1ff) { /* Check a single specified location. */
		err = ni65_probe1(dev, dev->base_addr);
	} else if (dev->base_addr > 0) { /* Don't probe at all. */
		err = -ENXIO;
	} else {
		for (port = ports; *port && ni65_probe1(dev, *port); port++)
			;
		if (!*port)
			err = -ENODEV;
	}
	if (err)
		goto out;

	err = register_netdev(dev);
	if (err)
		goto out1;
	return dev;
out1:
	cleanup_card(dev);
out:
	free_netdev(dev);
	return ERR_PTR(err);
}

/*
 * this is the real card probe ..
 */
static int __init ni65_probe1(struct net_device *dev,int ioaddr)
{
	int i,j;
	struct priv *p;
	unsigned long flags;

	dev->irq = irq;
	dev->dma = dma;

	for(i=0;i<NUM_CARDS;i++) {
		if(!request_region(ioaddr, cards[i].total_size, cards[i].cardname))
			continue;
		if(cards[i].id_offset >= 0) {
			if(inb(ioaddr+cards[i].id_offset+0) != cards[i].id0 ||
				 inb(ioaddr+cards[i].id_offset+1) != cards[i].id1) {
				 release_region(ioaddr, cards[i].total_size);
				 continue;