macio-adb.c
来自「linux 内核源代码」· C语言 代码 · 共 285 行
C
285 行
/* * Driver for the ADB controller in the Mac I/O (Hydra) chip. */#include <stdarg.h>#include <linux/types.h>#include <linux/errno.h>#include <linux/kernel.h>#include <linux/delay.h>#include <linux/spinlock.h>#include <linux/interrupt.h>#include <asm/prom.h>#include <linux/adb.h>#include <asm/io.h>#include <asm/pgtable.h>#include <asm/hydra.h>#include <asm/irq.h>#include <asm/system.h>#include <linux/init.h>#include <linux/ioport.h>struct preg { unsigned char r; char pad[15];};struct adb_regs { struct preg intr; struct preg data[9]; struct preg intr_enb; struct preg dcount; struct preg error; struct preg ctrl; struct preg autopoll; struct preg active_hi; struct preg active_lo; struct preg test;};/* Bits in intr and intr_enb registers */#define DFB 1 /* data from bus */#define TAG 2 /* transfer access grant *//* Bits in dcount register */#define HMB 0x0f /* how many bytes */#define APD 0x10 /* auto-poll data *//* Bits in error register */#define NRE 1 /* no response error */#define DLE 2 /* data lost error *//* Bits in ctrl register */#define TAR 1 /* transfer access request */#define DTB 2 /* data to bus */#define CRE 4 /* command response expected */#define ADB_RST 8 /* ADB reset *//* Bits in autopoll register */#define APE 1 /* autopoll enable */static volatile struct adb_regs __iomem *adb;static struct adb_request *current_req, *last_req;static DEFINE_SPINLOCK(macio_lock);static int macio_probe(void);static int macio_init(void);static irqreturn_t macio_adb_interrupt(int irq, void *arg);static int macio_send_request(struct adb_request *req, int sync);static int macio_adb_autopoll(int devs);static void macio_adb_poll(void);static int macio_adb_reset_bus(void);struct adb_driver macio_adb_driver = { "MACIO", macio_probe, macio_init, macio_send_request, /*macio_write,*/ macio_adb_autopoll, macio_adb_poll, macio_adb_reset_bus};int macio_probe(void){ struct device_node *np; np = of_find_compatible_node(NULL, "adb", "chrp,adb0"); if (np) { of_node_put(np); return 0; } return -ENODEV;}int macio_init(void){ struct device_node *adbs; struct resource r; unsigned int irq; adbs = of_find_compatible_node(NULL, "adb", "chrp,adb0"); if (adbs == 0) return -ENXIO; if (of_address_to_resource(adbs, 0, &r)) { of_node_put(adbs); return -ENXIO; } adb = ioremap(r.start, sizeof(struct adb_regs)); out_8(&adb->ctrl.r, 0); out_8(&adb->intr.r, 0); out_8(&adb->error.r, 0); out_8(&adb->active_hi.r, 0xff); /* for now, set all devices active */ out_8(&adb->active_lo.r, 0xff); out_8(&adb->autopoll.r, APE); irq = irq_of_parse_and_map(adbs, 0); of_node_put(adbs); if (request_irq(irq, macio_adb_interrupt, 0, "ADB", (void *)0)) { printk(KERN_ERR "ADB: can't get irq %d\n", irq); return -EAGAIN; } out_8(&adb->intr_enb.r, DFB | TAG); printk("adb: mac-io driver 1.0 for unified ADB\n"); return 0;}static int macio_adb_autopoll(int devs){ unsigned long flags; spin_lock_irqsave(&macio_lock, flags); out_8(&adb->active_hi.r, devs >> 8); out_8(&adb->active_lo.r, devs); out_8(&adb->autopoll.r, devs? APE: 0); spin_unlock_irqrestore(&macio_lock, flags); return 0;}static int macio_adb_reset_bus(void){ unsigned long flags; int timeout = 1000000; /* Hrm... we may want to not lock interrupts for so * long ... oh well, who uses that chip anyway ? :) * That function will be seldomly used during boot * on rare machines, so... */ spin_lock_irqsave(&macio_lock, flags); out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) | ADB_RST); while ((in_8(&adb->ctrl.r) & ADB_RST) != 0) { if (--timeout == 0) { out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) & ~ADB_RST); return -1; } } spin_unlock_irqrestore(&macio_lock, flags); return 0;}/* Send an ADB command */static int macio_send_request(struct adb_request *req, int sync){ unsigned long flags; int i; if (req->data[0] != ADB_PACKET) return -EINVAL; for (i = 0; i < req->nbytes - 1; ++i) req->data[i] = req->data[i+1]; --req->nbytes; req->next = NULL; req->sent = 0; req->complete = 0; req->reply_len = 0; spin_lock_irqsave(&macio_lock, flags); if (current_req != 0) { last_req->next = req; last_req = req; } else { current_req = last_req = req; out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) | TAR); } spin_unlock_irqrestore(&macio_lock, flags); if (sync) { while (!req->complete) macio_adb_poll(); } return 0;}static irqreturn_t macio_adb_interrupt(int irq, void *arg){ int i, n, err; struct adb_request *req = NULL; unsigned char ibuf[16]; int ibuf_len = 0; int complete = 0; int autopoll = 0; int handled = 0; spin_lock(&macio_lock); if (in_8(&adb->intr.r) & TAG) { handled = 1; if ((req = current_req) != 0) { /* put the current request in */ for (i = 0; i < req->nbytes; ++i) out_8(&adb->data[i].r, req->data[i]); out_8(&adb->dcount.r, req->nbytes & HMB); req->sent = 1; if (req->reply_expected) { out_8(&adb->ctrl.r, DTB + CRE); } else { out_8(&adb->ctrl.r, DTB); current_req = req->next; complete = 1; if (current_req) out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) | TAR); } } out_8(&adb->intr.r, 0); } if (in_8(&adb->intr.r) & DFB) { handled = 1; err = in_8(&adb->error.r); if (current_req && current_req->sent) { /* this is the response to a command */ req = current_req; if (err == 0) { req->reply_len = in_8(&adb->dcount.r) & HMB; for (i = 0; i < req->reply_len; ++i) req->reply[i] = in_8(&adb->data[i].r); } current_req = req->next; complete = 1; if (current_req) out_8(&adb->ctrl.r, in_8(&adb->ctrl.r) | TAR); } else if (err == 0) { /* autopoll data */ n = in_8(&adb->dcount.r) & HMB; for (i = 0; i < n; ++i) ibuf[i] = in_8(&adb->data[i].r); ibuf_len = n; autopoll = (in_8(&adb->dcount.r) & APD) != 0; } out_8(&adb->error.r, 0); out_8(&adb->intr.r, 0); } spin_unlock(&macio_lock); if (complete && req) { void (*done)(struct adb_request *) = req->done; mb(); req->complete = 1; /* Here, we assume that if the request has a done member, the * struct request will survive to setting req->complete to 1 */ if (done) (*done)(req); } if (ibuf_len) adb_input(ibuf, ibuf_len, autopoll); return IRQ_RETVAL(handled);}static void macio_adb_poll(void){ unsigned long flags; local_irq_save(flags); if (in_8(&adb->intr.r) != 0) macio_adb_interrupt(0, NULL); local_irq_restore(flags);}
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?