pxamci.h
来自「linux 内核源代码」· C头文件 代码 · 共 91 行
H
91 行
#define MMC_STRPCL 0x0000#define STOP_CLOCK (1 << 0)#define START_CLOCK (2 << 0)#define MMC_STAT 0x0004#define STAT_END_CMD_RES (1 << 13)#define STAT_PRG_DONE (1 << 12)#define STAT_DATA_TRAN_DONE (1 << 11)#define STAT_CLK_EN (1 << 8)#define STAT_RECV_FIFO_FULL (1 << 7)#define STAT_XMIT_FIFO_EMPTY (1 << 6)#define STAT_RES_CRC_ERR (1 << 5)#define STAT_SPI_READ_ERROR_TOKEN (1 << 4)#define STAT_CRC_READ_ERROR (1 << 3)#define STAT_CRC_WRITE_ERROR (1 << 2)#define STAT_TIME_OUT_RESPONSE (1 << 1)#define STAT_READ_TIME_OUT (1 << 0)#define MMC_CLKRT 0x0008 /* 3 bit */#define MMC_SPI 0x000c#define SPI_CS_ADDRESS (1 << 3)#define SPI_CS_EN (1 << 2)#define CRC_ON (1 << 1)#define SPI_EN (1 << 0)#define MMC_CMDAT 0x0010#define CMDAT_SDIO_INT_EN (1 << 11)#define CMDAT_SD_4DAT (1 << 8)#define CMDAT_DMAEN (1 << 7)#define CMDAT_INIT (1 << 6)#define CMDAT_BUSY (1 << 5)#define CMDAT_STREAM (1 << 4) /* 1 = stream */#define CMDAT_WRITE (1 << 3) /* 1 = write */#define CMDAT_DATAEN (1 << 2)#define CMDAT_RESP_NONE (0 << 0)#define CMDAT_RESP_SHORT (1 << 0)#define CMDAT_RESP_R2 (2 << 0)#define CMDAT_RESP_R3 (3 << 0)#define MMC_RESTO 0x0014 /* 7 bit */#define MMC_RDTO 0x0018 /* 16 bit */#define MMC_BLKLEN 0x001c /* 10 bit */#define MMC_NOB 0x0020 /* 16 bit */#define MMC_PRTBUF 0x0024#define BUF_PART_FULL (1 << 0)#define MMC_I_MASK 0x0028/*PXA27x MMC interrupts*/#define SDIO_SUSPEND_ACK (1 << 12)#define SDIO_INT (1 << 11)#define RD_STALLED (1 << 10)#define RES_ERR (1 << 9)#define DAT_ERR (1 << 8)#define TINT (1 << 7)/*PXA2xx MMC interrupts*/#define TXFIFO_WR_REQ (1 << 6)#define RXFIFO_RD_REQ (1 << 5)#define CLK_IS_OFF (1 << 4)#define STOP_CMD (1 << 3)#define END_CMD_RES (1 << 2)#define PRG_DONE (1 << 1)#define DATA_TRAN_DONE (1 << 0)#ifdef CONFIG_PXA27x#define MMC_I_MASK_ALL 0x00001fff#else#define MMC_I_MASK_ALL 0x0000007f#endif#define MMC_I_REG 0x002c/* same as MMC_I_MASK */#define MMC_CMD 0x0030#define MMC_ARGH 0x0034 /* 16 bit */#define MMC_ARGL 0x0038 /* 16 bit */#define MMC_RES 0x003c /* 16 bit */#define MMC_RXFIFO 0x0040 /* 8 bit */#define MMC_TXFIFO 0x0044 /* 8 bit */
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?