t128.h

来自「linux 内核源代码」· C头文件 代码 · 共 154 行

H
154
字号
/* * Trantor T128/T128F/T228 defines *	Note : architecturally, the T100 and T128 are different and won't work * * Copyright 1993, Drew Eckhardt *	Visionary Computing *	(Unix and Linux consulting and custom programming) *	drew@colorado.edu *      +1 (303) 440-4894 * * DISTRIBUTION RELEASE 3. * * For more information, please consult * * Trantor Systems, Ltd. * T128/T128F/T228 SCSI Host Adapter * Hardware Specifications * * Trantor Systems, Ltd. * 5415 Randall Place * Fremont, CA 94538 * 1+ (415) 770-1400, FAX 1+ (415) 770-9910 * * and * * NCR 5380 Family * SCSI Protocol Controller * Databook * * NCR Microelectronics * 1635 Aeroplaza Drive * Colorado Springs, CO 80916 * 1+ (719) 578-3400 * 1+ (800) 334-5454 *//* * $Log: t128.h,v $ */#ifndef T128_H#define T128_H#define T128_PUBLIC_RELEASE 3#define TDEBUG		0#define TDEBUG_INIT	0x1#define TDEBUG_TRANSFER 0x2/* * The trantor boards are memory mapped. They use an NCR5380 or * equivalent (my sample board had part second sourced from ZILOG). * NCR's recommended "Pseudo-DMA" architecture is used, where * a PAL drives the DMA signals on the 5380 allowing fast, blind * transfers with proper handshaking. *//* * Note : a boot switch is provided for the purpose of informing the * firmware to boot or not boot from attached SCSI devices.  So, I imagine * there are fewer people who've yanked the ROM like they do on the Seagate * to make bootup faster, and I'll probably use this for autodetection. */#define T_ROM_OFFSET		0/* * Note : my sample board *WAS NOT* populated with the SRAM, so this * can't be used for autodetection without a ROM present. */#define T_RAM_OFFSET		0x1800/* * All of the registers are allocated 32 bytes of address space, except * for the data register (read/write to/from the 5380 in pseudo-DMA mode) */ #define T_CONTROL_REG_OFFSET	0x1c00	/* rw */#define T_CR_INT		0x10	/* Enable interrupts */#define T_CR_CT			0x02	/* Reset watchdog timer */#define T_STATUS_REG_OFFSET	0x1c20	/* ro */#define T_ST_BOOT		0x80	/* Boot switch */#define T_ST_S3			0x40	/* User settable switches, */#define T_ST_S2			0x20	/* read 0 when switch is on, 1 off */#define T_ST_S1			0x10#define T_ST_PS2		0x08	/* Set for Microchannel 228 */#define T_ST_RDY		0x04	/* 5380 DRQ */#define T_ST_TIM		0x02	/* indicates 40us watchdog timer fired */#define T_ST_ZERO		0x01	/* Always zero */#define T_5380_OFFSET		0x1d00	/* 8 registers here, see NCR5380.h */#define T_DATA_REG_OFFSET	0x1e00	/* rw 512 bytes long */#ifndef ASMstatic int t128_abort(struct scsi_cmnd *);static int t128_biosparam(struct scsi_device *, struct block_device *,			  sector_t, int*);static int t128_detect(struct scsi_host_template *);static int t128_queue_command(struct scsi_cmnd *,			      void (*done)(struct scsi_cmnd *));static int t128_bus_reset(struct scsi_cmnd *);#ifndef CMD_PER_LUN#define CMD_PER_LUN 2#endif#ifndef CAN_QUEUE#define CAN_QUEUE 32#endif#ifndef HOSTS_C#define NCR5380_implementation_fields \    void __iomem *base#define NCR5380_local_declare() \    void __iomem *base#define NCR5380_setup(instance) \    base = ((struct NCR5380_hostdata *)(instance->hostdata))->base#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))#if !(TDEBUG & TDEBUG_TRANSFER)#define NCR5380_read(reg) readb(T128_address(reg))#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))#else#define NCR5380_read(reg)						\    (((unsigned char) printk("scsi%d : read register %d at address %08x\n"\    , instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg)))#define NCR5380_write(reg, value) {					\    printk("scsi%d : write %02x to register %d at address %08x\n",	\	    instance->hostno, (value), (reg), T128_address(reg));	\    writeb((value), (T128_address(reg)));				\}#endif#define NCR5380_intr t128_intr#define do_NCR5380_intr do_t128_intr#define NCR5380_queue_command t128_queue_command#define NCR5380_abort t128_abort#define NCR5380_bus_reset t128_bus_reset#define NCR5380_proc_info t128_proc_info/* 15 14 12 10 7 5 3   1101 0100 1010 1000 */#define T128_IRQS 0xc4a8#endif /* else def HOSTS_C */#endif /* ndef ASM */#endif /* T128_H */

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?