tle62x0.c

来自「linux 内核源代码」· C语言 代码 · 共 332 行

C
332
字号
/* * tle62x0.c -- support Infineon TLE62x0 driver chips * * Copyright (c) 2007 Simtec Electronics *	Ben Dooks, <ben@simtec.co.uk> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */#include <linux/device.h>#include <linux/kernel.h>#include <linux/spi/spi.h>#include <linux/spi/tle62x0.h>#define CMD_READ	0x00#define CMD_SET		0xff#define DIAG_NORMAL	0x03#define DIAG_OVERLOAD	0x02#define DIAG_OPEN	0x01#define DIAG_SHORTGND	0x00struct tle62x0_state {	struct spi_device	*us;	struct mutex		lock;	unsigned int		nr_gpio;	unsigned int		gpio_state;	unsigned char		tx_buff[4];	unsigned char		rx_buff[4];};static int to_gpio_num(struct device_attribute *attr);static inline int tle62x0_write(struct tle62x0_state *st){	unsigned char *buff = st->tx_buff;	unsigned int gpio_state = st->gpio_state;	buff[0] = CMD_SET;	if (st->nr_gpio == 16) {		buff[1] = gpio_state >> 8;		buff[2] = gpio_state;	} else {		buff[1] = gpio_state;	}	dev_dbg(&st->us->dev, "buff %02x,%02x,%02x\n",		buff[0], buff[1], buff[2]);	return spi_write(st->us, buff, (st->nr_gpio == 16) ? 3 : 2);}static inline int tle62x0_read(struct tle62x0_state *st){	unsigned char *txbuff = st->tx_buff;	struct spi_transfer xfer = {		.tx_buf		= txbuff,		.rx_buf		= st->rx_buff,		.len		= (st->nr_gpio * 2) / 8,	};	struct spi_message msg;	txbuff[0] = CMD_READ;	txbuff[1] = 0x00;	txbuff[2] = 0x00;	txbuff[3] = 0x00;	spi_message_init(&msg);	spi_message_add_tail(&xfer, &msg);	return spi_sync(st->us, &msg);}static unsigned char *decode_fault(unsigned int fault_code){	fault_code &= 3;	switch (fault_code) {	case DIAG_NORMAL:		return "N";	case DIAG_OVERLOAD:		return "V";	case DIAG_OPEN:		return "O";	case DIAG_SHORTGND:		return "G";	}	return "?";}static ssize_t tle62x0_status_show(struct device *dev,		struct device_attribute *attr, char *buf){	struct tle62x0_state *st = dev_get_drvdata(dev);	char *bp = buf;	unsigned char *buff = st->rx_buff;	unsigned long fault = 0;	int ptr;	int ret;	mutex_lock(&st->lock);	ret = tle62x0_read(st);	dev_dbg(dev, "tle62x0_read() returned %d\n", ret);	if (ret < 0) {		mutex_unlock(&st->lock);		return ret;	}	for (ptr = 0; ptr < (st->nr_gpio * 2)/8; ptr += 1) {		fault <<= 8;		fault  |= ((unsigned long)buff[ptr]);		dev_dbg(dev, "byte %d is %02x\n", ptr, buff[ptr]);	}	for (ptr = 0; ptr < st->nr_gpio; ptr++) {		bp += sprintf(bp, "%s ", decode_fault(fault >> (ptr * 2)));	}	*bp++ = '\n';	mutex_unlock(&st->lock);	return bp - buf;}static DEVICE_ATTR(status_show, S_IRUGO, tle62x0_status_show, NULL);static ssize_t tle62x0_gpio_show(struct device *dev,		struct device_attribute *attr, char *buf){	struct tle62x0_state *st = dev_get_drvdata(dev);	int gpio_num = to_gpio_num(attr);	int value;	mutex_lock(&st->lock);	value = (st->gpio_state >> gpio_num) & 1;	mutex_unlock(&st->lock);	return snprintf(buf, PAGE_SIZE, "%d", value);}static ssize_t tle62x0_gpio_store(struct device *dev,		struct device_attribute *attr,		const char *buf, size_t len){	struct tle62x0_state *st = dev_get_drvdata(dev);	int gpio_num = to_gpio_num(attr);	unsigned long val;	char *endp;	val = simple_strtoul(buf, &endp, 0);	if (buf == endp)		return -EINVAL;	dev_dbg(dev, "setting gpio %d to %ld\n", gpio_num, val);	mutex_lock(&st->lock);	if (val)		st->gpio_state |= 1 << gpio_num;	else		st->gpio_state &= ~(1 << gpio_num);	tle62x0_write(st);	mutex_unlock(&st->lock);	return len;}static DEVICE_ATTR(gpio1, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio2, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio3, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio4, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio5, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio6, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio7, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio8, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio9, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio10, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio11, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio12, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio13, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio14, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio15, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static DEVICE_ATTR(gpio16, S_IWUSR|S_IRUGO,		tle62x0_gpio_show, tle62x0_gpio_store);static struct device_attribute *gpio_attrs[] = {	[0]		= &dev_attr_gpio1,	[1]		= &dev_attr_gpio2,	[2]		= &dev_attr_gpio3,	[3]		= &dev_attr_gpio4,	[4]		= &dev_attr_gpio5,	[5]		= &dev_attr_gpio6,	[6]		= &dev_attr_gpio7,	[7]		= &dev_attr_gpio8,	[8]		= &dev_attr_gpio9,	[9]		= &dev_attr_gpio10,	[10]		= &dev_attr_gpio11,	[11]		= &dev_attr_gpio12,	[12]		= &dev_attr_gpio13,	[13]		= &dev_attr_gpio14,	[14]		= &dev_attr_gpio15,	[15]		= &dev_attr_gpio16};static int to_gpio_num(struct device_attribute *attr){	int ptr;	for (ptr = 0; ptr < ARRAY_SIZE(gpio_attrs); ptr++) {		if (gpio_attrs[ptr] == attr)			return ptr;	}	return -1;}static int __devinit tle62x0_probe(struct spi_device *spi){	struct tle62x0_state *st;	struct tle62x0_pdata *pdata;	int ptr;	int ret;	pdata = spi->dev.platform_data;	if (pdata == NULL) {		dev_err(&spi->dev, "no device data specified\n");		return -EINVAL;	}	st = kzalloc(sizeof(struct tle62x0_state), GFP_KERNEL);	if (st == NULL) {		dev_err(&spi->dev, "no memory for device state\n");		return -ENOMEM;	}	st->us = spi;	st->nr_gpio = pdata->gpio_count;	st->gpio_state = pdata->init_state;	mutex_init(&st->lock);	ret = device_create_file(&spi->dev, &dev_attr_status_show);	if (ret) {		dev_err(&spi->dev, "cannot create status attribute\n");		goto err_status;	}	for (ptr = 0; ptr < pdata->gpio_count; ptr++) {		ret = device_create_file(&spi->dev, gpio_attrs[ptr]);		if (ret) {			dev_err(&spi->dev, "cannot create gpio attribute\n");			goto err_gpios;		}	}	/* tle62x0_write(st); */	spi_set_drvdata(spi, st);	return 0; err_gpios:	for (; ptr > 0; ptr--)		device_remove_file(&spi->dev, gpio_attrs[ptr]);	device_remove_file(&spi->dev, &dev_attr_status_show); err_status:	kfree(st);	return ret;}static int __devexit tle62x0_remove(struct spi_device *spi){	struct tle62x0_state *st = spi_get_drvdata(spi);	int ptr;	for (ptr = 0; ptr < st->nr_gpio; ptr++)		device_remove_file(&spi->dev, gpio_attrs[ptr]);	kfree(st);	return 0;}static struct spi_driver tle62x0_driver = {	.driver = {		.name	= "tle62x0",		.owner	= THIS_MODULE,	},	.probe		= tle62x0_probe,	.remove		= __devexit_p(tle62x0_remove),};static __init int tle62x0_init(void){	return spi_register_driver(&tle62x0_driver);}static __exit void tle62x0_exit(void){	spi_unregister_driver(&tle62x0_driver);}module_init(tle62x0_init);module_exit(tle62x0_exit);MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");MODULE_DESCRIPTION("TLE62x0 SPI driver");MODULE_LICENSE("GPL v2");

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?