欢迎来到虫虫下载站 | 资源下载 资源专辑 关于我们
虫虫下载站

pc8736x_gpio.c

linux 内核源代码
C
字号:
/* linux/drivers/char/pc8736x_gpio.c   National Semiconductor PC8736x GPIO driver.  Allows a user space   process to play with the GPIO pins.   Copyright (c) 2005,2006 Jim Cromie <jim.cromie@gmail.com>   adapted from linux/drivers/char/scx200_gpio.c   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>,*/#include <linux/fs.h>#include <linux/module.h>#include <linux/errno.h>#include <linux/kernel.h>#include <linux/init.h>#include <linux/cdev.h>#include <linux/io.h>#include <linux/ioport.h>#include <linux/mutex.h>#include <linux/nsc_gpio.h>#include <linux/platform_device.h>#include <asm/uaccess.h>#define DEVNAME "pc8736x_gpio"MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>");MODULE_DESCRIPTION("NatSemi/Winbond PC-8736x GPIO Pin Driver");MODULE_LICENSE("GPL");static int major;		/* default to dynamic major */module_param(major, int, 0);MODULE_PARM_DESC(major, "Major device number");static DEFINE_MUTEX(pc8736x_gpio_config_lock);static unsigned pc8736x_gpio_base;static u8 pc8736x_gpio_shadow[4];#define SIO_BASE1       0x2E	/* 1st command-reg to check */#define SIO_BASE2       0x4E	/* alt command-reg to check */#define SIO_SID		0x20	/* SuperI/O ID Register */#define SIO_SID_VALUE	0xe9	/* Expected value in SuperI/O ID Register */#define SIO_CF1		0x21	/* chip config, bit0 is chip enable */#define PC8736X_GPIO_RANGE	16 /* ioaddr range */#define PC8736X_GPIO_CT		32 /* minors matching 4 8 bit ports */#define SIO_UNIT_SEL	0x7	/* unit select reg */#define SIO_UNIT_ACT	0x30	/* unit enable */#define SIO_GPIO_UNIT	0x7	/* unit number of GPIO */#define SIO_VLM_UNIT	0x0D#define SIO_TMS_UNIT	0x0E/* config-space addrs to read/write each unit's runtime addr */#define SIO_BASE_HADDR		0x60#define SIO_BASE_LADDR		0x61/* GPIO config-space pin-control addresses */#define SIO_GPIO_PIN_SELECT	0xF0#define SIO_GPIO_PIN_CONFIG     0xF1#define SIO_GPIO_PIN_EVENT      0xF2static unsigned char superio_cmd = 0;static unsigned char selected_device = 0xFF;	/* bogus start val *//* GPIO port runtime access, functionality */static int port_offset[] = { 0, 4, 8, 10 };	/* non-uniform offsets ! *//* static int event_capable[] = { 1, 1, 0, 0 };   ports 2,3 are hobbled */#define PORT_OUT	0#define PORT_IN		1#define PORT_EVT_EN	2#define PORT_EVT_STST	3static struct platform_device *pdev;  /* use in dev_*() */static inline void superio_outb(int addr, int val){	outb_p(addr, superio_cmd);	outb_p(val, superio_cmd + 1);}static inline int superio_inb(int addr){	outb_p(addr, superio_cmd);	return inb_p(superio_cmd + 1);}static int pc8736x_superio_present(void){	/* try the 2 possible values, read a hardware reg to verify */	superio_cmd = SIO_BASE1;	if (superio_inb(SIO_SID) == SIO_SID_VALUE)		return superio_cmd;	superio_cmd = SIO_BASE2;	if (superio_inb(SIO_SID) == SIO_SID_VALUE)		return superio_cmd;	return 0;}static void device_select(unsigned devldn){	superio_outb(SIO_UNIT_SEL, devldn);	selected_device = devldn;}static void select_pin(unsigned iminor){	/* select GPIO port/pin from device minor number */	device_select(SIO_GPIO_UNIT);	superio_outb(SIO_GPIO_PIN_SELECT,		     ((iminor << 1) & 0xF0) | (iminor & 0x7));}static inline u32 pc8736x_gpio_configure_fn(unsigned index, u32 mask, u32 bits,					    u32 func_slct){	u32 config, new_config;	mutex_lock(&pc8736x_gpio_config_lock);	device_select(SIO_GPIO_UNIT);	select_pin(index);	/* read current config value */	config = superio_inb(func_slct);	/* set new config */	new_config = (config & mask) | bits;	superio_outb(func_slct, new_config);	mutex_unlock(&pc8736x_gpio_config_lock);	return config;}static u32 pc8736x_gpio_configure(unsigned index, u32 mask, u32 bits){	return pc8736x_gpio_configure_fn(index, mask, bits,					 SIO_GPIO_PIN_CONFIG);}static int pc8736x_gpio_get(unsigned minor){	int port, bit, val;	port = minor >> 3;	bit = minor & 7;	val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);	val >>= bit;	val &= 1;	dev_dbg(&pdev->dev, "_gpio_get(%d from %x bit %d) == val %d\n",		minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit,		val);	return val;}static void pc8736x_gpio_set(unsigned minor, int val){	int port, bit, curval;	minor &= 0x1f;	port = minor >> 3;	bit = minor & 7;	curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);	dev_dbg(&pdev->dev, "addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n",		pc8736x_gpio_base + port_offset[port] + PORT_OUT,		curval, bit, (curval & ~(1 << bit)), val, (val << bit));	val = (curval & ~(1 << bit)) | (val << bit);	dev_dbg(&pdev->dev, "gpio_set(minor:%d port:%d bit:%d)"		" %2x -> %2x\n", minor, port, bit, curval, val);	outb_p(val, pc8736x_gpio_base + port_offset[port] + PORT_OUT);	curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);	val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);	dev_dbg(&pdev->dev, "wrote %x, read: %x\n", curval, val);	pc8736x_gpio_shadow[port] = val;}static int pc8736x_gpio_current(unsigned minor){	int port, bit;	minor &= 0x1f;	port = minor >> 3;	bit = minor & 7;	return ((pc8736x_gpio_shadow[port] >> bit) & 0x01);}static void pc8736x_gpio_change(unsigned index){	pc8736x_gpio_set(index, !pc8736x_gpio_current(index));}static struct nsc_gpio_ops pc8736x_gpio_ops = {	.owner		= THIS_MODULE,	.gpio_config	= pc8736x_gpio_configure,	.gpio_dump	= nsc_gpio_dump,	.gpio_get	= pc8736x_gpio_get,	.gpio_set	= pc8736x_gpio_set,	.gpio_change	= pc8736x_gpio_change,	.gpio_current	= pc8736x_gpio_current};static int pc8736x_gpio_open(struct inode *inode, struct file *file){	unsigned m = iminor(inode);	file->private_data = &pc8736x_gpio_ops;	dev_dbg(&pdev->dev, "open %d\n", m);	if (m >= PC8736X_GPIO_CT)		return -EINVAL;	return nonseekable_open(inode, file);}static const struct file_operations pc8736x_gpio_fileops = {	.owner	= THIS_MODULE,	.open	= pc8736x_gpio_open,	.write	= nsc_gpio_write,	.read	= nsc_gpio_read,};static void __init pc8736x_init_shadow(void){	int port;	/* read the current values driven on the GPIO signals */	for (port = 0; port < 4; ++port)		pc8736x_gpio_shadow[port]		    = inb_p(pc8736x_gpio_base + port_offset[port]			    + PORT_OUT);}static struct cdev pc8736x_gpio_cdev;static int __init pc8736x_gpio_init(void){	int rc;	dev_t devid;	pdev = platform_device_alloc(DEVNAME, 0);	if (!pdev)		return -ENOMEM;	rc = platform_device_add(pdev);	if (rc) {		rc = -ENODEV;		goto undo_platform_dev_alloc;	}	dev_info(&pdev->dev, "NatSemi pc8736x GPIO Driver Initializing\n");	if (!pc8736x_superio_present()) {		rc = -ENODEV;		dev_err(&pdev->dev, "no device found\n");		goto undo_platform_dev_add;	}	pc8736x_gpio_ops.dev = &pdev->dev;	/* Verify that chip and it's GPIO unit are both enabled.	   My BIOS does this, so I take minimum action here	 */	rc = superio_inb(SIO_CF1);	if (!(rc & 0x01)) {		rc = -ENODEV;		dev_err(&pdev->dev, "device not enabled\n");		goto undo_platform_dev_add;	}	device_select(SIO_GPIO_UNIT);	if (!superio_inb(SIO_UNIT_ACT)) {		rc = -ENODEV;		dev_err(&pdev->dev, "GPIO unit not enabled\n");		goto undo_platform_dev_add;	}	/* read the GPIO unit base addr that chip responds to */	pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8			     | superio_inb(SIO_BASE_LADDR));	if (!request_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE, DEVNAME)) {		rc = -ENODEV;		dev_err(&pdev->dev, "GPIO ioport %x busy\n",			pc8736x_gpio_base);		goto undo_platform_dev_add;	}	dev_info(&pdev->dev, "GPIO ioport %x reserved\n", pc8736x_gpio_base);	if (major) {		devid = MKDEV(major, 0);		rc = register_chrdev_region(devid, PC8736X_GPIO_CT, DEVNAME);	} else {		rc = alloc_chrdev_region(&devid, 0, PC8736X_GPIO_CT, DEVNAME);		major = MAJOR(devid);	}	if (rc < 0) {		dev_err(&pdev->dev, "register-chrdev failed: %d\n", rc);		goto undo_request_region;	}	if (!major) {		major = rc;		dev_dbg(&pdev->dev, "got dynamic major %d\n", major);	}	pc8736x_init_shadow();	/* ignore minor errs, and succeed */	cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops);	cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT);	return 0;undo_request_region:	release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);undo_platform_dev_add:	platform_device_del(pdev);undo_platform_dev_alloc:	platform_device_put(pdev);	return rc;}static void __exit pc8736x_gpio_cleanup(void){	dev_dbg(&pdev->dev, "cleanup\n");	cdev_del(&pc8736x_gpio_cdev);	unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT);	release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);	platform_device_del(pdev);	platform_device_put(pdev);}module_init(pc8736x_gpio_init);module_exit(pc8736x_gpio_cleanup);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -