pata_isapnp.c

来自「linux 内核源代码」· C语言 代码 · 共 173 行

C
173
字号
/* *   pata-isapnp.c - ISA PnP PATA controller driver. *   Copyright 2005/2006 Red Hat Inc <alan@redhat.com>, all rights reserved. * *   Based in part on ide-pnp.c by Andrey Panin <pazke@donpac.ru> */#include <linux/kernel.h>#include <linux/module.h>#include <linux/isapnp.h>#include <linux/init.h>#include <linux/blkdev.h>#include <linux/delay.h>#include <scsi/scsi_host.h>#include <linux/ata.h>#include <linux/libata.h>#define DRV_NAME "pata_isapnp"#define DRV_VERSION "0.2.2"static struct scsi_host_template isapnp_sht = {	.module			= THIS_MODULE,	.name			= DRV_NAME,	.ioctl			= ata_scsi_ioctl,	.queuecommand		= ata_scsi_queuecmd,	.can_queue		= ATA_DEF_QUEUE,	.this_id		= ATA_SHT_THIS_ID,	.sg_tablesize		= LIBATA_MAX_PRD,	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,	.emulated		= ATA_SHT_EMULATED,	.use_clustering		= ATA_SHT_USE_CLUSTERING,	.proc_name		= DRV_NAME,	.dma_boundary		= ATA_DMA_BOUNDARY,	.slave_configure	= ata_scsi_slave_config,	.slave_destroy		= ata_scsi_slave_destroy,	.bios_param		= ata_std_bios_param,};static struct ata_port_operations isapnp_port_ops = {	.tf_load	= ata_tf_load,	.tf_read	= ata_tf_read,	.check_status 	= ata_check_status,	.exec_command	= ata_exec_command,	.dev_select 	= ata_std_dev_select,	.freeze		= ata_bmdma_freeze,	.thaw		= ata_bmdma_thaw,	.error_handler	= ata_bmdma_error_handler,	.post_internal_cmd = ata_bmdma_post_internal_cmd,	.cable_detect	= ata_cable_40wire,	.qc_prep 	= ata_qc_prep,	.qc_issue	= ata_qc_issue_prot,	.data_xfer	= ata_data_xfer,	.irq_clear	= ata_bmdma_irq_clear,	.irq_on		= ata_irq_on,	.port_start	= ata_sff_port_start,};/** *	isapnp_init_one		-	attach an isapnp interface *	@idev: PnP device *	@dev_id: matching detect line * *	Register an ISA bus IDE interface. Such interfaces are PIO 0 and *	non shared IRQ. */static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev_id){	struct ata_host *host;	struct ata_port *ap;	void __iomem *cmd_addr, *ctl_addr;	int irq = 0;	irq_handler_t handler = NULL;	if (pnp_port_valid(idev, 0) == 0)		return -ENODEV;	if (pnp_irq_valid(idev, 0)) {		irq = pnp_irq(idev, 0);		handler = ata_interrupt;	}	/* allocate host */	host = ata_host_alloc(&idev->dev, 1);	if (!host)		return -ENOMEM;	/* acquire resources and fill host */	cmd_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 0), 8);	if (!cmd_addr)		return -ENOMEM;	ap = host->ports[0];	ap->ops = &isapnp_port_ops;	ap->pio_mask = 1;	ap->flags |= ATA_FLAG_SLAVE_POSS;	ap->ioaddr.cmd_addr = cmd_addr;	if (pnp_port_valid(idev, 1) == 0) {		ctl_addr = devm_ioport_map(&idev->dev,					   pnp_port_start(idev, 1), 1);		ap->ioaddr.altstatus_addr = ctl_addr;		ap->ioaddr.ctl_addr = ctl_addr;	}	ata_std_ports(&ap->ioaddr);	ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",		      (unsigned long long)pnp_port_start(idev, 0),		      (unsigned long long)pnp_port_start(idev, 1));	/* activate */	return ata_host_activate(host, irq, handler, 0,				 &isapnp_sht);}/** *	isapnp_remove_one	-	unplug an isapnp interface *	@idev: PnP device * *	Remove a previously configured PnP ATA port. Called only on module *	unload events as the core does not currently deal with ISAPnP docking. */static void isapnp_remove_one(struct pnp_dev *idev){	struct device *dev = &idev->dev;	struct ata_host *host = dev_get_drvdata(dev);	ata_host_detach(host);}static struct pnp_device_id isapnp_devices[] = {  	/* Generic ESDI/IDE/ATA compatible hard disk controller */	{.id = "PNP0600", .driver_data = 0},	{.id = ""}};MODULE_DEVICE_TABLE(pnp, isapnp_devices);static struct pnp_driver isapnp_driver = {	.name		= DRV_NAME,	.id_table	= isapnp_devices,	.probe		= isapnp_init_one,	.remove		= isapnp_remove_one,};static int __init isapnp_init(void){	return pnp_register_driver(&isapnp_driver);}static void __exit isapnp_exit(void){	pnp_unregister_driver(&isapnp_driver);}MODULE_AUTHOR("Alan Cox");MODULE_DESCRIPTION("low-level driver for ISA PnP ATA");MODULE_LICENSE("GPL");MODULE_VERSION(DRV_VERSION);module_init(isapnp_init);module_exit(isapnp_exit);

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?