⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 rtc-bfin.c

📁 linux 内核源代码
💻 C
字号:
/* * Blackfin On-Chip Real Time Clock Driver *  Supports BF53[123]/BF53[467]/BF54[2489] * * Copyright 2004-2007 Analog Devices Inc. * * Enter bugs at http://blackfin.uclinux.org/ * * Licensed under the GPL-2 or later. *//* The biggest issue we deal with in this driver is that register writes are * synced to the RTC frequency of 1Hz.  So if you write to a register and * attempt to write again before the first write has completed, the new write * is simply discarded.  This can easily be troublesome if userspace disables * one event (say periodic) and then right after enables an event (say alarm). * Since all events are maintained in the same interrupt mask register, if * we wrote to it to disable the first event and then wrote to it again to * enable the second event, that second event would not be enabled as the * write would be discarded and things quickly fall apart. * * To keep this delay from significantly degrading performance (we, in theory, * would have to sleep for up to 1 second everytime we wanted to write a * register), we only check the write pending status before we start to issue * a new write.  We bank on the idea that it doesnt matter when the sync * happens so long as we don't attempt another write before it does.  The only * time userspace would take this penalty is when they try and do multiple * operations right after another ... but in this case, they need to take the * sync penalty, so we should be OK. * * Also note that the RTC_ISTAT register does not suffer this penalty; its * writes to clear status registers complete immediately. */#include <linux/module.h>#include <linux/kernel.h>#include <linux/bcd.h>#include <linux/rtc.h>#include <linux/init.h>#include <linux/platform_device.h>#include <linux/seq_file.h>#include <linux/interrupt.h>#include <linux/spinlock.h>#include <linux/delay.h>#include <asm/blackfin.h>#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __FUNCTION__, __LINE__, ## args)#define stampit() stamp("here i am")struct bfin_rtc {	struct rtc_device *rtc_dev;	struct rtc_time rtc_alarm;	spinlock_t lock;};/* Bit values for the ISTAT / ICTL registers */#define RTC_ISTAT_WRITE_COMPLETE  0x8000#define RTC_ISTAT_WRITE_PENDING   0x4000#define RTC_ISTAT_ALARM_DAY       0x0040#define RTC_ISTAT_24HR            0x0020#define RTC_ISTAT_HOUR            0x0010#define RTC_ISTAT_MIN             0x0008#define RTC_ISTAT_SEC             0x0004#define RTC_ISTAT_ALARM           0x0002#define RTC_ISTAT_STOPWATCH       0x0001/* Shift values for RTC_STAT register */#define DAY_BITS_OFF    17#define HOUR_BITS_OFF   12#define MIN_BITS_OFF    6#define SEC_BITS_OFF    0/* Some helper functions to convert between the common RTC notion of time * and the internal Blackfin notion that is stored in 32bits. */static inline u32 rtc_time_to_bfin(unsigned long now){	u32 sec  = (now % 60);	u32 min  = (now % (60 * 60)) / 60;	u32 hour = (now % (60 * 60 * 24)) / (60 * 60);	u32 days = (now / (60 * 60 * 24));	return (sec  << SEC_BITS_OFF) +	       (min  << MIN_BITS_OFF) +	       (hour << HOUR_BITS_OFF) +	       (days << DAY_BITS_OFF);}static inline unsigned long rtc_bfin_to_time(u32 rtc_bfin){	return (((rtc_bfin >> SEC_BITS_OFF)  & 0x003F)) +	       (((rtc_bfin >> MIN_BITS_OFF)  & 0x003F) * 60) +	       (((rtc_bfin >> HOUR_BITS_OFF) & 0x001F) * 60 * 60) +	       (((rtc_bfin >> DAY_BITS_OFF)  & 0x7FFF) * 60 * 60 * 24);}static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm){	rtc_time_to_tm(rtc_bfin_to_time(rtc_bfin), tm);}/* Wait for the previous write to a RTC register to complete. * Unfortunately, we can't sleep here as that introduces a race condition when * turning on interrupt events.  Consider this: *  - process sets alarm *  - process enables alarm *  - process sleeps while waiting for rtc write to sync *  - interrupt fires while process is sleeping *  - interrupt acks the event by writing to ISTAT *  - interrupt sets the WRITE PENDING bit *  - interrupt handler finishes *  - process wakes up, sees WRITE PENDING bit set, goes to sleep *  - interrupt fires while process is sleeping * If anyone can point out the obvious solution here, i'm listening :).  This * shouldn't be an issue on an SMP or preempt system as this function should * only be called with the rtc lock held. */static void rtc_bfin_sync_pending(void){	stampit();	while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE)) {		if (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING))			break;	}	bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE);}static void rtc_bfin_reset(struct bfin_rtc *rtc){	/* Initialize the RTC. Enable pre-scaler to scale RTC clock	 * to 1Hz and clear interrupt/status registers. */	spin_lock_irq(&rtc->lock);	rtc_bfin_sync_pending();	bfin_write_RTC_PREN(0x1);	bfin_write_RTC_ICTL(0);	bfin_write_RTC_SWCNT(0);	bfin_write_RTC_ALARM(0);	bfin_write_RTC_ISTAT(0xFFFF);	spin_unlock_irq(&rtc->lock);}static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id){	struct platform_device *pdev = to_platform_device(dev_id);	struct bfin_rtc *rtc = platform_get_drvdata(pdev);	unsigned long events = 0;	u16 rtc_istat;	stampit();	spin_lock_irq(&rtc->lock);	rtc_istat = bfin_read_RTC_ISTAT();	if (rtc_istat & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY)) {		bfin_write_RTC_ISTAT(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY);		events |= RTC_AF | RTC_IRQF;	}	if (rtc_istat & RTC_ISTAT_STOPWATCH) {		bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);		events |= RTC_PF | RTC_IRQF;		bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);	}	if (rtc_istat & RTC_ISTAT_SEC) {		bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);		events |= RTC_UF | RTC_IRQF;	}	rtc_update_irq(rtc->rtc_dev, 1, events);	spin_unlock_irq(&rtc->lock);	return IRQ_HANDLED;}static int bfin_rtc_open(struct device *dev){	struct bfin_rtc *rtc = dev_get_drvdata(dev);	int ret;	stampit();	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_DISABLED, "rtc-bfin", dev);	if (unlikely(ret)) {		dev_err(dev, "request RTC IRQ failed with %d\n", ret);		return ret;	}	rtc_bfin_reset(rtc);	return ret;}static void bfin_rtc_release(struct device *dev){	struct bfin_rtc *rtc = dev_get_drvdata(dev);	stampit();	rtc_bfin_reset(rtc);	free_irq(IRQ_RTC, dev);}static int bfin_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg){	struct bfin_rtc *rtc = dev_get_drvdata(dev);	stampit();	switch (cmd) {	case RTC_PIE_ON:		stampit();		spin_lock_irq(&rtc->lock);		rtc_bfin_sync_pending();		bfin_write_RTC_ISTAT(RTC_ISTAT_STOPWATCH);		bfin_write_RTC_SWCNT(rtc->rtc_dev->irq_freq);		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_STOPWATCH);		spin_unlock_irq(&rtc->lock);		return 0;	case RTC_PIE_OFF:		stampit();		spin_lock_irq(&rtc->lock);		rtc_bfin_sync_pending();		bfin_write_RTC_SWCNT(0);		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_STOPWATCH);		spin_unlock_irq(&rtc->lock);		return 0;	case RTC_UIE_ON:		stampit();		spin_lock_irq(&rtc->lock);		rtc_bfin_sync_pending();		bfin_write_RTC_ISTAT(RTC_ISTAT_SEC);		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | RTC_ISTAT_SEC);		spin_unlock_irq(&rtc->lock);		return 0;	case RTC_UIE_OFF:		stampit();		spin_lock_irq(&rtc->lock);		rtc_bfin_sync_pending();		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~RTC_ISTAT_SEC);		spin_unlock_irq(&rtc->lock);		return 0;	case RTC_AIE_ON: {		unsigned long rtc_alarm;		u16 which_alarm;		int ret = 0;		stampit();		spin_lock_irq(&rtc->lock);		rtc_bfin_sync_pending();		if (rtc->rtc_alarm.tm_yday == -1) {			struct rtc_time now;			rtc_bfin_to_tm(bfin_read_RTC_STAT(), &now);			now.tm_sec = rtc->rtc_alarm.tm_sec;			now.tm_min = rtc->rtc_alarm.tm_min;			now.tm_hour = rtc->rtc_alarm.tm_hour;			ret = rtc_tm_to_time(&now, &rtc_alarm);			which_alarm = RTC_ISTAT_ALARM;		} else {			ret = rtc_tm_to_time(&rtc->rtc_alarm, &rtc_alarm);			which_alarm = RTC_ISTAT_ALARM_DAY;		}		if (ret == 0) {			bfin_write_RTC_ISTAT(which_alarm);			bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm));			bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | which_alarm);		}		spin_unlock_irq(&rtc->lock);		return ret;	}	case RTC_AIE_OFF:		stampit();		spin_lock_irq(&rtc->lock);		rtc_bfin_sync_pending();		bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & ~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));		spin_unlock_irq(&rtc->lock);		return 0;	}	return -ENOIOCTLCMD;}static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm){	struct bfin_rtc *rtc = dev_get_drvdata(dev);	stampit();	spin_lock_irq(&rtc->lock);	rtc_bfin_sync_pending();	rtc_bfin_to_tm(bfin_read_RTC_STAT(), tm);	spin_unlock_irq(&rtc->lock);	return 0;}static int bfin_rtc_set_time(struct device *dev, struct rtc_time *tm){	struct bfin_rtc *rtc = dev_get_drvdata(dev);	int ret;	unsigned long now;	stampit();	spin_lock_irq(&rtc->lock);	ret = rtc_tm_to_time(tm, &now);	if (ret == 0) {		rtc_bfin_sync_pending();		bfin_write_RTC_STAT(rtc_time_to_bfin(now));	}	spin_unlock_irq(&rtc->lock);	return ret;}static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm){	struct bfin_rtc *rtc = dev_get_drvdata(dev);	stampit();	memcpy(&alrm->time, &rtc->rtc_alarm, sizeof(struct rtc_time));	alrm->pending = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));	return 0;}static int bfin_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm){	struct bfin_rtc *rtc = dev_get_drvdata(dev);	stampit();	memcpy(&rtc->rtc_alarm, &alrm->time, sizeof(struct rtc_time));	return 0;}static int bfin_rtc_proc(struct device *dev, struct seq_file *seq){#define yesno(x) (x ? "yes" : "no")	u16 ictl = bfin_read_RTC_ICTL();	stampit();	seq_printf(seq, "alarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM));	seq_printf(seq, "wkalarm_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_ALARM_DAY));	seq_printf(seq, "seconds_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_SEC));	seq_printf(seq, "periodic_IRQ\t: %s\n", yesno(ictl & RTC_ISTAT_STOPWATCH));#ifdef DEBUG	seq_printf(seq, "RTC_STAT\t: 0x%08X\n", bfin_read_RTC_STAT());	seq_printf(seq, "RTC_ICTL\t: 0x%04X\n", bfin_read_RTC_ICTL());	seq_printf(seq, "RTC_ISTAT\t: 0x%04X\n", bfin_read_RTC_ISTAT());	seq_printf(seq, "RTC_SWCNT\t: 0x%04X\n", bfin_read_RTC_SWCNT());	seq_printf(seq, "RTC_ALARM\t: 0x%08X\n", bfin_read_RTC_ALARM());	seq_printf(seq, "RTC_PREN\t: 0x%04X\n", bfin_read_RTC_PREN());#endif	return 0;}static int bfin_irq_set_freq(struct device *dev, int freq){	struct bfin_rtc *rtc = dev_get_drvdata(dev);	stampit();	rtc->rtc_dev->irq_freq = freq;	return 0;}static struct rtc_class_ops bfin_rtc_ops = {	.open          = bfin_rtc_open,	.release       = bfin_rtc_release,	.ioctl         = bfin_rtc_ioctl,	.read_time     = bfin_rtc_read_time,	.set_time      = bfin_rtc_set_time,	.read_alarm    = bfin_rtc_read_alarm,	.set_alarm     = bfin_rtc_set_alarm,	.proc          = bfin_rtc_proc,	.irq_set_freq  = bfin_irq_set_freq,};static int __devinit bfin_rtc_probe(struct platform_device *pdev){	struct bfin_rtc *rtc;	int ret = 0;	stampit();	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);	if (unlikely(!rtc))		return -ENOMEM;	spin_lock_init(&rtc->lock);	rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE);	if (unlikely(IS_ERR(rtc))) {		ret = PTR_ERR(rtc->rtc_dev);		goto err;	}	rtc->rtc_dev->irq_freq = 0;	rtc->rtc_dev->max_user_freq = (2 << 16); /* stopwatch is an unsigned 16 bit reg */	platform_set_drvdata(pdev, rtc);	return 0;err:	kfree(rtc);	return ret;}static int __devexit bfin_rtc_remove(struct platform_device *pdev){	struct bfin_rtc *rtc = platform_get_drvdata(pdev);	rtc_device_unregister(rtc->rtc_dev);	platform_set_drvdata(pdev, NULL);	kfree(rtc);	return 0;}static struct platform_driver bfin_rtc_driver = {	.driver		= {		.name	= "rtc-bfin",		.owner	= THIS_MODULE,	},	.probe		= bfin_rtc_probe,	.remove		= __devexit_p(bfin_rtc_remove),};static int __init bfin_rtc_init(void){	stampit();	return platform_driver_register(&bfin_rtc_driver);}static void __exit bfin_rtc_exit(void){	platform_driver_unregister(&bfin_rtc_driver);}module_init(bfin_rtc_init);module_exit(bfin_rtc_exit);MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver");MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");MODULE_LICENSE("GPL");

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -