⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 ehci-ppc-soc.c

📁 linux 内核源代码
💻 C
字号:
/* * EHCI HCD (Host Controller Driver) for USB. * * (C) Copyright 2006-2007 Stefan Roese <sr@denx.de>, DENX Software Engineering * * Bus Glue for PPC On-Chip EHCI driver * Tested on AMCC 440EPx * * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com> * * This file is licenced under the GPL. */#include <linux/platform_device.h>extern int usb_disabled(void);/* called during probe() after chip reset completes */static int ehci_ppc_soc_setup(struct usb_hcd *hcd){	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);	int		retval;	retval = ehci_halt(ehci);	if (retval)		return retval;	retval = ehci_init(hcd);	if (retval)		return retval;	ehci->sbrn = 0x20;	return ehci_reset(ehci);}/** * usb_ehci_ppc_soc_probe - initialize PPC-SoC-based HCDs * Context: !in_interrupt() * * Allocates basic resources for this USB host controller, and * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. * */int usb_ehci_ppc_soc_probe(const struct hc_driver *driver,			   struct usb_hcd **hcd_out,			   struct platform_device *dev){	int retval;	struct usb_hcd *hcd;	struct ehci_hcd *ehci;	if (dev->resource[1].flags != IORESOURCE_IRQ) {		pr_debug("resource[1] is not IORESOURCE_IRQ");		retval = -ENOMEM;	}	hcd = usb_create_hcd(driver, &dev->dev, "PPC-SOC EHCI");	if (!hcd)		return -ENOMEM;	hcd->rsrc_start = dev->resource[0].start;	hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {		pr_debug("request_mem_region failed");		retval = -EBUSY;		goto err1;	}	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);	if (!hcd->regs) {		pr_debug("ioremap failed");		retval = -ENOMEM;		goto err2;	}	ehci = hcd_to_ehci(hcd);	ehci->big_endian_mmio = 1;	ehci->big_endian_desc = 1;	ehci->caps = hcd->regs;	ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));	/* cache this readonly data; minimize chip reads */	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);#if defined(CONFIG_440EPX)	/*	 * 440EPx Errata USBH_3	 * Fix: Enable Break Memory Transfer (BMT) in INSNREG3	 */	out_be32((void *)((ulong)(&ehci->regs->command) + 0x8c), (1 << 0));	ehci_dbg(ehci, "Break Memory Transfer (BMT) has beed enabled!\n");#endif	retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);	if (retval == 0)		return retval;	iounmap(hcd->regs);err2:	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);err1:	usb_put_hcd(hcd);	return retval;}/* may be called without controller electrically present *//* may be called with controller, bus, and devices active *//** * usb_ehci_hcd_ppc_soc_remove - shutdown processing for PPC-SoC-based HCDs * @dev: USB Host Controller being removed * Context: !in_interrupt() * * Reverses the effect of usb_ehci_hcd_ppc_soc_probe(), first invoking * the HCD's stop() method.  It is always called from a thread * context, normally "rmmod", "apmd", or something similar. * */void usb_ehci_ppc_soc_remove(struct usb_hcd *hcd, struct platform_device *dev){	usb_remove_hcd(hcd);	iounmap(hcd->regs);	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);	usb_put_hcd(hcd);}static const struct hc_driver ehci_ppc_soc_hc_driver = {	.description = hcd_name,	.product_desc = "PPC-SOC EHCI",	.hcd_priv_size = sizeof(struct ehci_hcd),	/*	 * generic hardware linkage	 */	.irq = ehci_irq,	.flags = HCD_MEMORY | HCD_USB2,	/*	 * basic lifecycle operations	 */	.reset = ehci_ppc_soc_setup,	.start = ehci_run,	.stop = ehci_stop,	.shutdown = ehci_shutdown,	/*	 * managing i/o requests and associated device resources	 */	.urb_enqueue = ehci_urb_enqueue,	.urb_dequeue = ehci_urb_dequeue,	.endpoint_disable = ehci_endpoint_disable,	/*	 * scheduling support	 */	.get_frame_number = ehci_get_frame,	/*	 * root hub support	 */	.hub_status_data = ehci_hub_status_data,	.hub_control = ehci_hub_control,	.bus_suspend = ehci_bus_suspend,	.bus_resume = ehci_bus_resume,};static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev){	struct usb_hcd *hcd = NULL;	int ret;	pr_debug("In ehci_hcd_ppc_soc_drv_probe\n");	if (usb_disabled())		return -ENODEV;	ret = usb_ehci_ppc_soc_probe(&ehci_ppc_soc_hc_driver, &hcd, pdev);	return ret;}static int ehci_hcd_ppc_soc_drv_remove(struct platform_device *pdev){	struct usb_hcd *hcd = platform_get_drvdata(pdev);	usb_ehci_ppc_soc_remove(hcd, pdev);	return 0;}MODULE_ALIAS("ppc-soc-ehci");static struct platform_driver ehci_ppc_soc_driver = {	.probe = ehci_hcd_ppc_soc_drv_probe,	.remove = ehci_hcd_ppc_soc_drv_remove,	.shutdown = usb_hcd_platform_shutdown,	.driver = {		.name = "ppc-soc-ehci",		.bus = &platform_bus_type	}};

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -