access.c
来自「linux 内核源代码」· C语言 代码 · 共 174 行
C
174 行
#include <linux/pci.h>#include <linux/module.h>#include <linux/sched.h>#include <linux/ioport.h>#include <linux/wait.h>#include "pci.h"/* * This interrupt-safe spinlock protects all accesses to PCI * configuration space. */static DEFINE_SPINLOCK(pci_lock);/* * Wrappers for all PCI configuration access functions. They just check * alignment, do locking and call the low-level functions pointed to * by pci_dev->ops. */#define PCI_byte_BAD 0#define PCI_word_BAD (pos & 1)#define PCI_dword_BAD (pos & 3)#define PCI_OP_READ(size,type,len) \int pci_bus_read_config_##size \ (struct pci_bus *bus, unsigned int devfn, int pos, type *value) \{ \ int res; \ unsigned long flags; \ u32 data = 0; \ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ spin_lock_irqsave(&pci_lock, flags); \ res = bus->ops->read(bus, devfn, pos, len, &data); \ *value = (type)data; \ spin_unlock_irqrestore(&pci_lock, flags); \ return res; \}#define PCI_OP_WRITE(size,type,len) \int pci_bus_write_config_##size \ (struct pci_bus *bus, unsigned int devfn, int pos, type value) \{ \ int res; \ unsigned long flags; \ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ spin_lock_irqsave(&pci_lock, flags); \ res = bus->ops->write(bus, devfn, pos, len, value); \ spin_unlock_irqrestore(&pci_lock, flags); \ return res; \}PCI_OP_READ(byte, u8, 1)PCI_OP_READ(word, u16, 2)PCI_OP_READ(dword, u32, 4)PCI_OP_WRITE(byte, u8, 1)PCI_OP_WRITE(word, u16, 2)PCI_OP_WRITE(dword, u32, 4)EXPORT_SYMBOL(pci_bus_read_config_byte);EXPORT_SYMBOL(pci_bus_read_config_word);EXPORT_SYMBOL(pci_bus_read_config_dword);EXPORT_SYMBOL(pci_bus_write_config_byte);EXPORT_SYMBOL(pci_bus_write_config_word);EXPORT_SYMBOL(pci_bus_write_config_dword);/* * The following routines are to prevent the user from accessing PCI config * space when it's unsafe to do so. Some devices require this during BIST and * we're required to prevent it during D-state transitions. * * We have a bit per device to indicate it's blocked and a global wait queue * for callers to sleep on until devices are unblocked. */static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait);static noinline void pci_wait_ucfg(struct pci_dev *dev){ DECLARE_WAITQUEUE(wait, current); __add_wait_queue(&pci_ucfg_wait, &wait); do { set_current_state(TASK_UNINTERRUPTIBLE); spin_unlock_irq(&pci_lock); schedule(); spin_lock_irq(&pci_lock); } while (dev->block_ucfg_access); __remove_wait_queue(&pci_ucfg_wait, &wait);}#define PCI_USER_READ_CONFIG(size,type) \int pci_user_read_config_##size \ (struct pci_dev *dev, int pos, type *val) \{ \ int ret = 0; \ u32 data = -1; \ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ spin_lock_irq(&pci_lock); \ if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ ret = dev->bus->ops->read(dev->bus, dev->devfn, \ pos, sizeof(type), &data); \ spin_unlock_irq(&pci_lock); \ *val = (type)data; \ return ret; \}#define PCI_USER_WRITE_CONFIG(size,type) \int pci_user_write_config_##size \ (struct pci_dev *dev, int pos, type val) \{ \ int ret = -EIO; \ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ spin_lock_irq(&pci_lock); \ if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ ret = dev->bus->ops->write(dev->bus, dev->devfn, \ pos, sizeof(type), val); \ spin_unlock_irq(&pci_lock); \ return ret; \}PCI_USER_READ_CONFIG(byte, u8)PCI_USER_READ_CONFIG(word, u16)PCI_USER_READ_CONFIG(dword, u32)PCI_USER_WRITE_CONFIG(byte, u8)PCI_USER_WRITE_CONFIG(word, u16)PCI_USER_WRITE_CONFIG(dword, u32)/** * pci_block_user_cfg_access - Block userspace PCI config reads/writes * @dev: pci device struct * * When user access is blocked, any reads or writes to config space will * sleep until access is unblocked again. We don't allow nesting of * block/unblock calls. */void pci_block_user_cfg_access(struct pci_dev *dev){ unsigned long flags; int was_blocked; spin_lock_irqsave(&pci_lock, flags); was_blocked = dev->block_ucfg_access; dev->block_ucfg_access = 1; spin_unlock_irqrestore(&pci_lock, flags); /* If we BUG() inside the pci_lock, we're guaranteed to hose * the machine */ BUG_ON(was_blocked);}EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);/** * pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes * @dev: pci device struct * * This function allows userspace PCI config accesses to resume. */void pci_unblock_user_cfg_access(struct pci_dev *dev){ unsigned long flags; spin_lock_irqsave(&pci_lock, flags); /* This indicates a problem in the caller, but we don't need * to kill them, unlike a double-block above. */ WARN_ON(!dev->block_ucfg_access); dev->block_ucfg_access = 0; wake_up_all(&pci_ucfg_wait); spin_unlock_irqrestore(&pci_lock, flags);}EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access);
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?