manager.c

来自「linux 内核源代码」· C语言 代码 · 共 578 行

C
578
字号
/* * manager.c - Resource Management, Conflict Resolution, Activation and Disabling of Devices * * based on isapnp.c resource management (c) Jaroslav Kysela <perex@perex.cz> * Copyright 2003 Adam Belay <ambx1@neo.rr.com> */#include <linux/errno.h>#include <linux/module.h>#include <linux/init.h>#include <linux/kernel.h>#include <linux/pnp.h>#include <linux/slab.h>#include <linux/bitmap.h>#include "base.h"DECLARE_MUTEX(pnp_res_mutex);static int pnp_assign_port(struct pnp_dev *dev, struct pnp_port *rule, int idx){	resource_size_t *start, *end;	unsigned long *flags;	if (idx >= PNP_MAX_PORT) {		dev_err(&dev->dev, "too many I/O port resources\n");		/* pretend we were successful so at least the manager won't try again */		return 1;	}	/* check if this resource has been manually set, if so skip */	if (!(dev->res.port_resource[idx].flags & IORESOURCE_AUTO))		return 1;	start = &dev->res.port_resource[idx].start;	end = &dev->res.port_resource[idx].end;	flags = &dev->res.port_resource[idx].flags;	/* set the initial values */	*flags |= rule->flags | IORESOURCE_IO;	*flags &= ~IORESOURCE_UNSET;	if (!rule->size) {		*flags |= IORESOURCE_DISABLED;		return 1;	/* skip disabled resource requests */	}	*start = rule->min;	*end = *start + rule->size - 1;	/* run through until pnp_check_port is happy */	while (!pnp_check_port(dev, idx)) {		*start += rule->align;		*end = *start + rule->size - 1;		if (*start > rule->max || !rule->align)			return 0;	}	return 1;}static int pnp_assign_mem(struct pnp_dev *dev, struct pnp_mem *rule, int idx){	resource_size_t *start, *end;	unsigned long *flags;	if (idx >= PNP_MAX_MEM) {		dev_err(&dev->dev, "too many memory resources\n");		/* pretend we were successful so at least the manager won't try again */		return 1;	}	/* check if this resource has been manually set, if so skip */	if (!(dev->res.mem_resource[idx].flags & IORESOURCE_AUTO))		return 1;	start = &dev->res.mem_resource[idx].start;	end = &dev->res.mem_resource[idx].end;	flags = &dev->res.mem_resource[idx].flags;	/* set the initial values */	*flags |= rule->flags | IORESOURCE_MEM;	*flags &= ~IORESOURCE_UNSET;	/* convert pnp flags to standard Linux flags */	if (!(rule->flags & IORESOURCE_MEM_WRITEABLE))		*flags |= IORESOURCE_READONLY;	if (rule->flags & IORESOURCE_MEM_CACHEABLE)		*flags |= IORESOURCE_CACHEABLE;	if (rule->flags & IORESOURCE_MEM_RANGELENGTH)		*flags |= IORESOURCE_RANGELENGTH;	if (rule->flags & IORESOURCE_MEM_SHADOWABLE)		*flags |= IORESOURCE_SHADOWABLE;	if (!rule->size) {		*flags |= IORESOURCE_DISABLED;		return 1;	/* skip disabled resource requests */	}	*start = rule->min;	*end = *start + rule->size - 1;	/* run through until pnp_check_mem is happy */	while (!pnp_check_mem(dev, idx)) {		*start += rule->align;		*end = *start + rule->size - 1;		if (*start > rule->max || !rule->align)			return 0;	}	return 1;}static int pnp_assign_irq(struct pnp_dev *dev, struct pnp_irq *rule, int idx){	resource_size_t *start, *end;	unsigned long *flags;	int i;	/* IRQ priority: this table is good for i386 */	static unsigned short xtab[16] = {		5, 10, 11, 12, 9, 14, 15, 7, 3, 4, 13, 0, 1, 6, 8, 2	};	if (idx >= PNP_MAX_IRQ) {		dev_err(&dev->dev, "too many IRQ resources\n");		/* pretend we were successful so at least the manager won't try again */		return 1;	}	/* check if this resource has been manually set, if so skip */	if (!(dev->res.irq_resource[idx].flags & IORESOURCE_AUTO))		return 1;	start = &dev->res.irq_resource[idx].start;	end = &dev->res.irq_resource[idx].end;	flags = &dev->res.irq_resource[idx].flags;	/* set the initial values */	*flags |= rule->flags | IORESOURCE_IRQ;	*flags &= ~IORESOURCE_UNSET;	if (bitmap_empty(rule->map, PNP_IRQ_NR)) {		*flags |= IORESOURCE_DISABLED;		return 1;	/* skip disabled resource requests */	}	/* TBD: need check for >16 IRQ */	*start = find_next_bit(rule->map, PNP_IRQ_NR, 16);	if (*start < PNP_IRQ_NR) {		*end = *start;		return 1;	}	for (i = 0; i < 16; i++) {		if (test_bit(xtab[i], rule->map)) {			*start = *end = xtab[i];			if (pnp_check_irq(dev, idx))				return 1;		}	}	return 0;}static void pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx){	resource_size_t *start, *end;	unsigned long *flags;	int i;	/* DMA priority: this table is good for i386 */	static unsigned short xtab[8] = {		1, 3, 5, 6, 7, 0, 2, 4	};	if (idx >= PNP_MAX_DMA) {		dev_err(&dev->dev, "too many DMA resources\n");		return;	}	/* check if this resource has been manually set, if so skip */	if (!(dev->res.dma_resource[idx].flags & IORESOURCE_AUTO))		return;	start = &dev->res.dma_resource[idx].start;	end = &dev->res.dma_resource[idx].end;	flags = &dev->res.dma_resource[idx].flags;	/* set the initial values */	*flags |= rule->flags | IORESOURCE_DMA;	*flags &= ~IORESOURCE_UNSET;	for (i = 0; i < 8; i++) {		if (rule->map & (1 << xtab[i])) {			*start = *end = xtab[i];			if (pnp_check_dma(dev, idx))				return;		}	}#ifdef MAX_DMA_CHANNELS	*start = *end = MAX_DMA_CHANNELS;#endif	*flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;}/** * pnp_init_resources - Resets a resource table to default values. * @table: pointer to the desired resource table */void pnp_init_resource_table(struct pnp_resource_table *table){	int idx;	for (idx = 0; idx < PNP_MAX_IRQ; idx++) {		table->irq_resource[idx].name = NULL;		table->irq_resource[idx].start = -1;		table->irq_resource[idx].end = -1;		table->irq_resource[idx].flags =		    IORESOURCE_IRQ | IORESOURCE_AUTO | IORESOURCE_UNSET;	}	for (idx = 0; idx < PNP_MAX_DMA; idx++) {		table->dma_resource[idx].name = NULL;		table->dma_resource[idx].start = -1;		table->dma_resource[idx].end = -1;		table->dma_resource[idx].flags =		    IORESOURCE_DMA | IORESOURCE_AUTO | IORESOURCE_UNSET;	}	for (idx = 0; idx < PNP_MAX_PORT; idx++) {		table->port_resource[idx].name = NULL;		table->port_resource[idx].start = 0;		table->port_resource[idx].end = 0;		table->port_resource[idx].flags =		    IORESOURCE_IO | IORESOURCE_AUTO | IORESOURCE_UNSET;	}	for (idx = 0; idx < PNP_MAX_MEM; idx++) {		table->mem_resource[idx].name = NULL;		table->mem_resource[idx].start = 0;		table->mem_resource[idx].end = 0;		table->mem_resource[idx].flags =		    IORESOURCE_MEM | IORESOURCE_AUTO | IORESOURCE_UNSET;	}}/** * pnp_clean_resources - clears resources that were not manually set * @res: the resources to clean */static void pnp_clean_resource_table(struct pnp_resource_table *res){	int idx;	for (idx = 0; idx < PNP_MAX_IRQ; idx++) {		if (!(res->irq_resource[idx].flags & IORESOURCE_AUTO))			continue;		res->irq_resource[idx].start = -1;		res->irq_resource[idx].end = -1;		res->irq_resource[idx].flags =		    IORESOURCE_IRQ | IORESOURCE_AUTO | IORESOURCE_UNSET;	}	for (idx = 0; idx < PNP_MAX_DMA; idx++) {		if (!(res->dma_resource[idx].flags & IORESOURCE_AUTO))			continue;		res->dma_resource[idx].start = -1;		res->dma_resource[idx].end = -1;		res->dma_resource[idx].flags =		    IORESOURCE_DMA | IORESOURCE_AUTO | IORESOURCE_UNSET;	}	for (idx = 0; idx < PNP_MAX_PORT; idx++) {		if (!(res->port_resource[idx].flags & IORESOURCE_AUTO))			continue;		res->port_resource[idx].start = 0;		res->port_resource[idx].end = 0;		res->port_resource[idx].flags =		    IORESOURCE_IO | IORESOURCE_AUTO | IORESOURCE_UNSET;	}	for (idx = 0; idx < PNP_MAX_MEM; idx++) {		if (!(res->mem_resource[idx].flags & IORESOURCE_AUTO))			continue;		res->mem_resource[idx].start = 0;		res->mem_resource[idx].end = 0;		res->mem_resource[idx].flags =		    IORESOURCE_MEM | IORESOURCE_AUTO | IORESOURCE_UNSET;	}}/** * pnp_assign_resources - assigns resources to the device based on the specified dependent number * @dev: pointer to the desired device * @depnum: the dependent function number * * Only set depnum to 0 if the device does not have dependent options. */static int pnp_assign_resources(struct pnp_dev *dev, int depnum){	struct pnp_port *port;	struct pnp_mem *mem;	struct pnp_irq *irq;	struct pnp_dma *dma;	int nport = 0, nmem = 0, nirq = 0, ndma = 0;	if (!pnp_can_configure(dev))		return -ENODEV;	down(&pnp_res_mutex);	pnp_clean_resource_table(&dev->res);	/* start with a fresh slate */	if (dev->independent) {		port = dev->independent->port;		mem = dev->independent->mem;		irq = dev->independent->irq;		dma = dev->independent->dma;		while (port) {			if (!pnp_assign_port(dev, port, nport))				goto fail;			nport++;			port = port->next;		}		while (mem) {			if (!pnp_assign_mem(dev, mem, nmem))				goto fail;			nmem++;			mem = mem->next;		}		while (irq) {			if (!pnp_assign_irq(dev, irq, nirq))				goto fail;			nirq++;			irq = irq->next;		}		while (dma) {			pnp_assign_dma(dev, dma, ndma);			ndma++;			dma = dma->next;		}	}	if (depnum) {		struct pnp_option *dep;		int i;		for (i = 1, dep = dev->dependent; i < depnum;		     i++, dep = dep->next)			if (!dep)				goto fail;		port = dep->port;		mem = dep->mem;		irq = dep->irq;		dma = dep->dma;		while (port) {			if (!pnp_assign_port(dev, port, nport))				goto fail;			nport++;			port = port->next;		}		while (mem) {			if (!pnp_assign_mem(dev, mem, nmem))				goto fail;			nmem++;			mem = mem->next;		}		while (irq) {			if (!pnp_assign_irq(dev, irq, nirq))				goto fail;			nirq++;			irq = irq->next;		}		while (dma) {			pnp_assign_dma(dev, dma, ndma);			ndma++;			dma = dma->next;		}	} else if (dev->dependent)		goto fail;	up(&pnp_res_mutex);	return 1;fail:	pnp_clean_resource_table(&dev->res);	up(&pnp_res_mutex);	return 0;}/** * pnp_manual_config_dev - Disables Auto Config and Manually sets the resource table * @dev: pointer to the desired device * @res: pointer to the new resource config * @mode: 0 or PNP_CONFIG_FORCE * * This function can be used by drivers that want to manually set thier resources. */int pnp_manual_config_dev(struct pnp_dev *dev, struct pnp_resource_table *res,			  int mode){	int i;	struct pnp_resource_table *bak;	if (!pnp_can_configure(dev))		return -ENODEV;	bak = pnp_alloc(sizeof(struct pnp_resource_table));	if (!bak)		return -ENOMEM;	*bak = dev->res;	down(&pnp_res_mutex);	dev->res = *res;	if (!(mode & PNP_CONFIG_FORCE)) {		for (i = 0; i < PNP_MAX_PORT; i++) {			if (!pnp_check_port(dev, i))				goto fail;		}		for (i = 0; i < PNP_MAX_MEM; i++) {			if (!pnp_check_mem(dev, i))				goto fail;		}		for (i = 0; i < PNP_MAX_IRQ; i++) {			if (!pnp_check_irq(dev, i))				goto fail;		}		for (i = 0; i < PNP_MAX_DMA; i++) {			if (!pnp_check_dma(dev, i))				goto fail;		}	}	up(&pnp_res_mutex);	kfree(bak);	return 0;fail:	dev->res = *bak;	up(&pnp_res_mutex);	kfree(bak);	return -EINVAL;}/** * pnp_auto_config_dev - automatically assigns resources to a device * @dev: pointer to the desired device */int pnp_auto_config_dev(struct pnp_dev *dev){	struct pnp_option *dep;	int i = 1;	if (!pnp_can_configure(dev)) {		dev_dbg(&dev->dev, "configuration not supported\n");		return -ENODEV;	}	if (!dev->dependent) {		if (pnp_assign_resources(dev, 0))			return 0;	} else {		dep = dev->dependent;		do {			if (pnp_assign_resources(dev, i))				return 0;			dep = dep->next;			i++;		} while (dep);	}	dev_err(&dev->dev, "unable to assign resources\n");	return -EBUSY;}/** * pnp_start_dev - low-level start of the PnP device * @dev: pointer to the desired device * * assumes that resources have already been allocated */int pnp_start_dev(struct pnp_dev *dev){	if (!pnp_can_write(dev)) {		dev_dbg(&dev->dev, "activation not supported\n");		return -EINVAL;	}	if (dev->protocol->set(dev, &dev->res) < 0) {		dev_err(&dev->dev, "activation failed\n");		return -EIO;	}	dev_info(&dev->dev, "activated\n");	return 0;}/** * pnp_stop_dev - low-level disable of the PnP device * @dev: pointer to the desired device * * does not free resources */int pnp_stop_dev(struct pnp_dev *dev){	if (!pnp_can_disable(dev)) {		dev_dbg(&dev->dev, "disabling not supported\n");		return -EINVAL;	}	if (dev->protocol->disable(dev) < 0) {		dev_err(&dev->dev, "disable failed\n");		return -EIO;	}	dev_info(&dev->dev, "disabled\n");	return 0;}/** * pnp_activate_dev - activates a PnP device for use * @dev: pointer to the desired device * * does not validate or set resources so be careful. */int pnp_activate_dev(struct pnp_dev *dev){	int error;	if (dev->active)		return 0;	/* the device is already active */	/* ensure resources are allocated */	if (pnp_auto_config_dev(dev))		return -EBUSY;	error = pnp_start_dev(dev);	if (error)		return error;	dev->active = 1;	return 1;}/** * pnp_disable_dev - disables device * @dev: pointer to the desired device * * inform the correct pnp protocol so that resources can be used by other devices */int pnp_disable_dev(struct pnp_dev *dev){	int error;	if (!dev->active)		return 0;	/* the device is already disabled */	error = pnp_stop_dev(dev);	if (error)		return error;	dev->active = 0;	/* release the resources so that other devices can use them */	down(&pnp_res_mutex);	pnp_clean_resource_table(&dev->res);	up(&pnp_res_mutex);	return 1;}/** * pnp_resource_change - change one resource * @resource: pointer to resource to be changed * @start: start of region * @size: size of region */void pnp_resource_change(struct resource *resource, resource_size_t start,			 resource_size_t size){	resource->flags &= ~(IORESOURCE_AUTO | IORESOURCE_UNSET);	resource->start = start;	resource->end = start + size - 1;}EXPORT_SYMBOL(pnp_manual_config_dev);EXPORT_SYMBOL(pnp_start_dev);EXPORT_SYMBOL(pnp_stop_dev);EXPORT_SYMBOL(pnp_activate_dev);EXPORT_SYMBOL(pnp_disable_dev);EXPORT_SYMBOL(pnp_resource_change);EXPORT_SYMBOL(pnp_init_resource_table);

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?