📄 icn.h
字号:
/* $Id: icn.h,v 1.30.6.5 2001/09/23 22:24:55 kai Exp $ * * ISDN lowlevel-module for the ICN active ISDN-Card. * * Copyright 1994 by Fritz Elfert (fritz@isdn4linux.de) * * This software may be used and distributed according to the terms * of the GNU General Public License, incorporated herein by reference. * */#ifndef icn_h#define icn_h#define ICN_IOCTL_SETMMIO 0#define ICN_IOCTL_GETMMIO 1#define ICN_IOCTL_SETPORT 2#define ICN_IOCTL_GETPORT 3#define ICN_IOCTL_LOADBOOT 4#define ICN_IOCTL_LOADPROTO 5#define ICN_IOCTL_LEASEDCFG 6#define ICN_IOCTL_GETDOUBLE 7#define ICN_IOCTL_DEBUGVAR 8#define ICN_IOCTL_ADDCARD 9/* Struct for adding new cards */typedef struct icn_cdef { int port; char id1[10]; char id2[10];} icn_cdef;#if defined(__KERNEL__) || defined(__DEBUGVAR__)#ifdef __KERNEL__/* Kernel includes */#include <linux/errno.h>#include <linux/fs.h>#include <linux/major.h>#include <asm/io.h>#include <linux/kernel.h>#include <linux/signal.h>#include <linux/slab.h>#include <linux/mm.h>#include <linux/mman.h>#include <linux/ioport.h>#include <linux/timer.h>#include <linux/wait.h>#include <linux/delay.h>#include <linux/isdnif.h>#endif /* __KERNEL__ *//* some useful macros for debugging */#ifdef ICN_DEBUG_PORT#define OUTB_P(v,p) {printk(KERN_DEBUG "icn: outb_p(0x%02x,0x%03x)\n",v,p); outb_p(v,p);}#else#define OUTB_P outb#endif/* Defaults for Port-Address and shared-memory */#define ICN_BASEADDR 0x320#define ICN_PORTLEN (0x04)#define ICN_MEMADDR 0x0d0000#define ICN_FLAGS_B1ACTIVE 1 /* B-Channel-1 is open */#define ICN_FLAGS_B2ACTIVE 2 /* B-Channel-2 is open */#define ICN_FLAGS_RUNNING 4 /* Cards driver activated */#define ICN_FLAGS_RBTIMER 8 /* cyclic scheduling of B-Channel-poll */#define ICN_BOOT_TIMEOUT1 1000 /* Delay for Boot-download (msecs) */#define ICN_TIMER_BCREAD (HZ/100) /* B-Channel poll-cycle */#define ICN_TIMER_DCREAD (HZ/2) /* D-Channel poll-cycle */#define ICN_CODE_STAGE1 4096 /* Size of bootcode */#define ICN_CODE_STAGE2 65536 /* Size of protocol-code */#define ICN_MAX_SQUEUE 8000 /* Max. outstanding send-data (2* hw-buf.) */#define ICN_FRAGSIZE (250) /* Max. size of send-fragments */#define ICN_BCH 2 /* Number of supported channels per card *//* type-definitions for accessing the mmap-io-areas */#define SHM_DCTL_OFFSET (0) /* Offset to data-controlstructures in shm */#define SHM_CCTL_OFFSET (0x1d2) /* Offset to comm-controlstructures in shm */#define SHM_CBUF_OFFSET (0x200) /* Offset to comm-buffers in shm */#define SHM_DBUF_OFFSET (0x2000) /* Offset to data-buffers in shm *//* * Layout of card's data buffers */typedef struct { unsigned char length; /* Bytecount of fragment (max 250) */ unsigned char endflag; /* 0=last frag., 0xff=frag. continued */ unsigned char data[ICN_FRAGSIZE]; /* The data */ /* Fill to 256 bytes */ char unused[0x100 - ICN_FRAGSIZE - 2];} frag_buf;/* * Layout of card's shared memory */typedef union { struct { unsigned char scns; /* Index to free SendFrag. */ unsigned char scnr; /* Index to active SendFrag READONLY */ unsigned char ecns; /* Index to free RcvFrag. READONLY */ unsigned char ecnr; /* Index to valid RcvFrag */ char unused[6]; unsigned short fuell1; /* Internal Buf Bytecount */ } data_control; struct { char unused[SHM_CCTL_OFFSET]; unsigned char iopc_i; /* Read-Ptr Status-Queue READONLY */ unsigned char iopc_o; /* Write-Ptr Status-Queue */ unsigned char pcio_i; /* Write-Ptr Command-Queue */ unsigned char pcio_o; /* Read-Ptr Command Queue READONLY */ } comm_control; struct { char unused[SHM_CBUF_OFFSET]; unsigned char pcio_buf[0x100]; /* Ring-Buffer Command-Queue */ unsigned char iopc_buf[0x100]; /* Ring-Buffer Status-Queue */ } comm_buffers; struct { char unused[SHM_DBUF_OFFSET]; frag_buf receive_buf[0x10]; frag_buf send_buf[0x10]; } data_buffers;} icn_shmem;/* * Per card driver data */typedef struct icn_card { struct icn_card *next; /* Pointer to next device struct */ struct icn_card *other; /* Pointer to other card for ICN4B */ unsigned short port; /* Base-port-address */ int myid; /* Driver-Nr. assigned by linklevel */ int rvalid; /* IO-portregion has been requested */ int leased; /* Flag: This Adapter is connected */ /* to a leased line */ unsigned short flags; /* Statusflags */ int doubleS0; /* Flag: ICN4B */ int secondhalf; /* Flag: Second half of a doubleS0 */ int fw_rev; /* Firmware revision loaded */ int ptype; /* Protocol type (1TR6 or Euro) */ struct timer_list st_timer; /* Timer for Status-Polls */ struct timer_list rb_timer; /* Timer for B-Channel-Polls */ u_char rcvbuf[ICN_BCH][4096]; /* B-Channel-Receive-Buffers */ int rcvidx[ICN_BCH]; /* Index for above buffers */ int l2_proto[ICN_BCH]; /* Current layer-2-protocol */ isdn_if interface; /* Interface to upper layer */ int iptr; /* Index to imsg-buffer */ char imsg[60]; /* Internal buf for status-parsing */ char msg_buf[2048]; /* Buffer for status-messages */ char *msg_buf_write; /* Writepointer for statusbuffer */ char *msg_buf_read; /* Readpointer for statusbuffer */ char *msg_buf_end; /* Pointer to end of statusbuffer */ int sndcount[ICN_BCH]; /* Byte-counters for B-Ch.-send */ int xlen[ICN_BCH]; /* Byte-counters/Flags for sent-ACK */ struct sk_buff *xskb[ICN_BCH]; /* Current transmitted skb */ struct sk_buff_head spqueue[ICN_BCH]; /* Sendqueue */ char regname[35]; /* Name used for request_region */ u_char xmit_lock[ICN_BCH]; /* Semaphore for pollbchan_send()*/ spinlock_t lock; /* protect critical operations */} icn_card;/* * Main driver data */typedef struct icn_dev { spinlock_t devlock; /* spinlock to protect this struct */ unsigned long memaddr; /* Address of memory mapped buffers */ icn_shmem __iomem *shmem; /* Pointer to memory-mapped-buffers */ int mvalid; /* IO-shmem has been requested */ int channel; /* Currently mapped channel */ struct icn_card *mcard; /* Currently mapped card */ int chanlock; /* Semaphore for channel-mapping */ int firstload; /* Flag: firmware never loaded */} icn_dev;typedef icn_dev *icn_devptr;#ifdef __KERNEL__static icn_card *cards = (icn_card *) 0;static u_char chan2bank[] ={0, 4, 8, 12}; /* for icn_map_channel() */static icn_dev dev;#endif /* __KERNEL__ *//* Utility-Macros *//* Macros for accessing ports */#define ICN_CFG (card->port)#define ICN_MAPRAM (card->port+1)#define ICN_RUN (card->port+2)#define ICN_BANK (card->port+3)/* Return true, if there is a free transmit-buffer */#define sbfree (((readb(&dev.shmem->data_control.scns)+1) & 0xf) != \ readb(&dev.shmem->data_control.scnr))/* Switch to next transmit-buffer */#define sbnext (writeb((readb(&dev.shmem->data_control.scns)+1) & 0xf, \ &dev.shmem->data_control.scns))/* Shortcuts for transmit-buffer-access */#define sbuf_n dev.shmem->data_control.scns#define sbuf_d dev.shmem->data_buffers.send_buf[readb(&sbuf_n)].data#define sbuf_l dev.shmem->data_buffers.send_buf[readb(&sbuf_n)].length#define sbuf_f dev.shmem->data_buffers.send_buf[readb(&sbuf_n)].endflag/* Return true, if there is receive-data is available */#define rbavl (readb(&dev.shmem->data_control.ecnr) != \ readb(&dev.shmem->data_control.ecns))/* Switch to next receive-buffer */#define rbnext (writeb((readb(&dev.shmem->data_control.ecnr)+1) & 0xf, \ &dev.shmem->data_control.ecnr))/* Shortcuts for receive-buffer-access */#define rbuf_n dev.shmem->data_control.ecnr#define rbuf_d dev.shmem->data_buffers.receive_buf[readb(&rbuf_n)].data#define rbuf_l dev.shmem->data_buffers.receive_buf[readb(&rbuf_n)].length#define rbuf_f dev.shmem->data_buffers.receive_buf[readb(&rbuf_n)].endflag/* Shortcuts for command-buffer-access */#define cmd_o (dev.shmem->comm_control.pcio_o)#define cmd_i (dev.shmem->comm_control.pcio_i)/* Return free space in command-buffer */#define cmd_free ((readb(&cmd_i)>=readb(&cmd_o))? \ 0x100-readb(&cmd_i)+readb(&cmd_o): \ readb(&cmd_o)-readb(&cmd_i))/* Shortcuts for message-buffer-access */#define msg_o (dev.shmem->comm_control.iopc_o)#define msg_i (dev.shmem->comm_control.iopc_i)/* Return length of Message, if avail. */#define msg_avail ((readb(&msg_o)>readb(&msg_i))? \ 0x100-readb(&msg_o)+readb(&msg_i): \ readb(&msg_i)-readb(&msg_o))#define CID (card->interface.id)#endif /* defined(__KERNEL__) || defined(__DEBUGVAR__) */#endif /* icn_h */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -