kconfig

来自「linux 内核源代码」· 代码 · 共 225 行

if (BF561)

source "arch/blackfin/mach-bf561/boards/Kconfig"

menu "BF561 Specific Configuration"

comment "Core B Support"

menu "Core B Support"

config BF561_COREB
	bool "Enable Core B support"
	default y

config BF561_COREB_RESET
	bool "Enable Core B reset support"
	default n
	help
	  This requires code in the application that is loaded
	  into Core B. In order to reset, the application needs
	  to install an interrupt handler for Supplemental
	  Interrupt 0, that sets RETI to 0xff600000 and writes
	  bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0.
	  This causes Core B to stall when Supplemental Interrupt
	  0 is set, and will reset PC to 0xff600000 when
	  COREB_SRAM_INIT is cleared.

endmenu

comment "Interrupt Priority Assignment"

menu "Priority"

config IRQ_PLL_WAKEUP
	int "PLL Wakeup Interrupt"
	default 7
config IRQ_DMA1_ERROR
	int "DMA1 Error (generic)"
	default 7
config IRQ_DMA2_ERROR
	int "DMA2 Error (generic)"
	default 7
config IRQ_IMDMA_ERROR
	int "IMDMA Error (generic)"
	default 7
config IRQ_PPI0_ERROR
	int "PPI0 Error Interrupt"
	default 7
config IRQ_PPI1_ERROR
	int "PPI1 Error Interrupt"
	default 7
config IRQ_SPORT0_ERROR
	int "SPORT0 Error Interrupt"
	default 7
config IRQ_SPORT1_ERROR
	int "SPORT1 Error Interrupt"
	default 7
config IRQ_SPI_ERROR
	int "SPI Error Interrupt"
	default 7
config IRQ_UART_ERROR
	int "UART Error Interrupt"
	default 7
config IRQ_RESERVED_ERROR
	int "Reserved Interrupt"
	default 7
config IRQ_DMA1_0
	int "DMA1 0  Interrupt(PPI1)"
	default 8
config IRQ_DMA1_1
	int "DMA1 1  Interrupt(PPI2)"
	default 8
config IRQ_DMA1_2
	int "DMA1 2  Interrupt"
	default 8
config IRQ_DMA1_3
	int "DMA1 3  Interrupt"
	default 8
config IRQ_DMA1_4
	int "DMA1 4  Interrupt"
	default 8
config IRQ_DMA1_5
	int "DMA1 5  Interrupt"
	default 8
config IRQ_DMA1_6
	int "DMA1 6  Interrupt"
	default 8
config IRQ_DMA1_7
	int "DMA1 7  Interrupt"
	default 8
config IRQ_DMA1_8
	int "DMA1 8  Interrupt"
	default 8
config IRQ_DMA1_9
	int "DMA1 9  Interrupt"
	default 8
config IRQ_DMA1_10
	int "DMA1 10 Interrupt"
	default 8
config IRQ_DMA1_11
	int "DMA1 11 Interrupt"
	default 8
config IRQ_DMA2_0
	int "DMA2 0  (SPORT0 RX)"
	default 9
config IRQ_DMA2_1
	int "DMA2 1  (SPORT0 TX)"
	default 9
config IRQ_DMA2_2
	int "DMA2 2  (SPORT1 RX)"
	default 9
config IRQ_DMA2_3
	int "DMA2 3  (SPORT2 TX)"
	default 9
config IRQ_DMA2_4
	int "DMA2 4  (SPI)"
	default 9
config IRQ_DMA2_5
	int "DMA2 5  (UART RX)"
	default 9
config IRQ_DMA2_6
	int "DMA2 6  (UART TX)"
	default 9
config IRQ_DMA2_7
	int "DMA2 7  Interrupt"
	default 9
config IRQ_DMA2_8
	int "DMA2 8  Interrupt"
	default 9
config IRQ_DMA2_9
	int "DMA2 9  Interrupt"
	default 9
config IRQ_DMA2_10
	int "DMA2 10 Interrupt"
	default 9
config IRQ_DMA2_11
	int "DMA2 11 Interrupt"
	default 9
config IRQ_TIMER0
	int "TIMER 0  Interrupt"
	default 10
config IRQ_TIMER1
	int "TIMER 1  Interrupt"
	default 10
config IRQ_TIMER2
	int "TIMER 2  Interrupt"
	default 10
config IRQ_TIMER3
	int "TIMER 3  Interrupt"
	default 10
config IRQ_TIMER4
	int "TIMER 4  Interrupt"
	default 10
config IRQ_TIMER5
	int "TIMER 5  Interrupt"
	default 10
config IRQ_TIMER6
	int "TIMER 6  Interrupt"
	default 10
config IRQ_TIMER7
	int "TIMER 7  Interrupt"
	default 10
config IRQ_TIMER8
	int "TIMER 8  Interrupt"
	default 10
config IRQ_TIMER9
	int "TIMER 9  Interrupt"
	default 10
config IRQ_TIMER10
	int "TIMER 10 Interrupt"
	default 10
config IRQ_TIMER11
	int "TIMER 11 Interrupt"
	default 10
config IRQ_PROG0_INTA
	int "Programmable Flags0 A (8)"
	default 11
config IRQ_PROG0_INTB
	int "Programmable Flags0 B (8)"
	default 11
config IRQ_PROG1_INTA
	int "Programmable Flags1 A (8)"
	default 11
config IRQ_PROG1_INTB
	int "Programmable Flags1 B (8)"
	default 11
config IRQ_PROG2_INTA
	int "Programmable Flags2 A (8)"
	default 11
config IRQ_PROG2_INTB
	int "Programmable Flags2 B (8)"
	default 11
config IRQ_DMA1_WRRD0
	int "MDMA1 0 write/read INT"
	default 8
config IRQ_DMA1_WRRD1
	int "MDMA1 1 write/read INT"
	default 8
config IRQ_DMA2_WRRD0
	int "MDMA2 0 write/read INT"
	default 9
config IRQ_DMA2_WRRD1
	int "MDMA2 1 write/read INT"
	default 9
config IRQ_IMDMA_WRRD0
	int "IMDMA 0 write/read INT"
	default 12
config IRQ_IMDMA_WRRD1
	int "IMDMA 1 write/read INT"
	default 12
config IRQ_WDTIMER
	int "Watch Dog Timer"
	default 13

	help
	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
	  This applies to all the above.  It is not recommended to assign the
	  highest priority number 7 to UART or any other device.

endmenu

endmenu

endif