q40ints.c
来自「linux 内核源代码」· C语言 代码 · 共 332 行
C
332 行
/* * arch/m68k/q40/q40ints.c * * Copyright (C) 1999,2001 Richard Zidlicky * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive * for more details. * * .. used to be loosely based on bvme6000ints.c * */#include <linux/types.h>#include <linux/kernel.h>#include <linux/errno.h>#include <linux/interrupt.h>#include <asm/ptrace.h>#include <asm/system.h>#include <asm/irq.h>#include <asm/traps.h>#include <asm/q40_master.h>#include <asm/q40ints.h>/* * Q40 IRQs are defined as follows: * 3,4,5,6,7,10,11,14,15 : ISA dev IRQs * 16-31: reserved * 32 : keyboard int * 33 : frame int (50/200 Hz periodic timer) * 34 : sample int (10/20 KHz periodic timer) **/static void q40_irq_handler(unsigned int, struct pt_regs *fp);static void q40_enable_irq(unsigned int);static void q40_disable_irq(unsigned int);unsigned short q40_ablecount[35];unsigned short q40_state[35];static int q40_irq_startup(unsigned int irq){ /* test for ISA ints not implemented by HW */ switch (irq) { case 1: case 2: case 8: case 9: case 11: case 12: case 13: printk("%s: ISA IRQ %d not implemented by HW\n", __FUNCTION__, irq); return -ENXIO; } return 0;}static void q40_irq_shutdown(unsigned int irq){}static struct irq_controller q40_irq_controller = { .name = "q40", .lock = __SPIN_LOCK_UNLOCKED(q40_irq_controller.lock), .startup = q40_irq_startup, .shutdown = q40_irq_shutdown, .enable = q40_enable_irq, .disable = q40_disable_irq,};/* * void q40_init_IRQ (void) * * Parameters: None * * Returns: Nothing * * This function is called during kernel startup to initialize * the q40 IRQ handling routines. */static int disabled;void __init q40_init_IRQ(void){ m68k_setup_irq_controller(&q40_irq_controller, 1, Q40_IRQ_MAX); /* setup handler for ISA ints */ m68k_setup_auto_interrupt(q40_irq_handler); m68k_irq_startup(IRQ_AUTO_2); m68k_irq_startup(IRQ_AUTO_4); /* now enable some ints.. */ master_outb(1, EXT_ENABLE_REG); /* ISA IRQ 5-15 */ /* make sure keyboard IRQ is disabled */ master_outb(0, KEY_IRQ_ENABLE_REG);}/* * this stuff doesn't really belong here.. */int ql_ticks; /* 200Hz ticks since last jiffie */static int sound_ticks;#define SVOL 45void q40_mksound(unsigned int hz, unsigned int ticks){ /* for now ignore hz, except that hz==0 switches off sound */ /* simply alternate the ampl (128-SVOL)-(128+SVOL)-..-.. at 200Hz */ if (hz == 0) { if (sound_ticks) sound_ticks = 1; *DAC_LEFT = 128; *DAC_RIGHT = 128; return; } /* sound itself is done in q40_timer_int */ if (sound_ticks == 0) sound_ticks = 1000; /* pretty long beep */ sound_ticks = ticks << 1;}static irq_handler_t q40_timer_routine;static irqreturn_t q40_timer_int (int irq, void * dev){ ql_ticks = ql_ticks ? 0 : 1; if (sound_ticks) { unsigned char sval=(sound_ticks & 1) ? 128-SVOL : 128+SVOL; sound_ticks--; *DAC_LEFT=sval; *DAC_RIGHT=sval; } if (!ql_ticks) q40_timer_routine(irq, dev); return IRQ_HANDLED;}void q40_sched_init (irq_handler_t timer_routine){ int timer_irq; q40_timer_routine = timer_routine; timer_irq = Q40_IRQ_FRAME; if (request_irq(timer_irq, q40_timer_int, 0, "timer", q40_timer_int)) panic("Couldn't register timer int"); master_outb(-1, FRAME_CLEAR_REG); master_outb( 1, FRAME_RATE_REG);}/* * tables to translate bits into IRQ numbers * it is a good idea to order the entries by priority **/struct IRQ_TABLE{ unsigned mask; int irq ;};#if 0static struct IRQ_TABLE iirqs[]={ {Q40_IRQ_FRAME_MASK,Q40_IRQ_FRAME}, {Q40_IRQ_KEYB_MASK,Q40_IRQ_KEYBOARD}, {0,0}};#endifstatic struct IRQ_TABLE eirqs[] = { { .mask = Q40_IRQ3_MASK, .irq = 3 }, /* ser 1 */ { .mask = Q40_IRQ4_MASK, .irq = 4 }, /* ser 2 */ { .mask = Q40_IRQ14_MASK, .irq = 14 }, /* IDE 1 */ { .mask = Q40_IRQ15_MASK, .irq = 15 }, /* IDE 2 */ { .mask = Q40_IRQ6_MASK, .irq = 6 }, /* floppy, handled elsewhere */ { .mask = Q40_IRQ7_MASK, .irq = 7 }, /* par */ { .mask = Q40_IRQ5_MASK, .irq = 5 }, { .mask = Q40_IRQ10_MASK, .irq = 10 }, {0,0}};/* complain only this many times about spurious ints : */static int ccleirq=60; /* ISA dev IRQs*//*static int cclirq=60;*/ /* internal *//* FIXME: add shared ints,mask,unmask,probing.... */#define IRQ_INPROGRESS 1/*static unsigned short saved_mask;*///static int do_tint=0;#define DEBUG_Q40INT/*#define IP_USE_DISABLE *//* would be nice, but crashes ???? */static int mext_disabled=0; /* ext irq disabled by master chip? */static int aliased_irq=0; /* how many times inside handler ?*//* got interrupt, dispatch to ISA or keyboard/timer IRQs */static void q40_irq_handler(unsigned int irq, struct pt_regs *fp){ unsigned mir, mer; int i;//repeat: mir = master_inb(IIRQ_REG);#ifdef CONFIG_BLK_DEV_FD if ((mir & Q40_IRQ_EXT_MASK) && (master_inb(EIRQ_REG) & Q40_IRQ6_MASK)) { floppy_hardint(); return; }#endif switch (irq) { case 4: case 6: __m68k_handle_int(Q40_IRQ_SAMPLE, fp); return; } if (mir & Q40_IRQ_FRAME_MASK) { __m68k_handle_int(Q40_IRQ_FRAME, fp); master_outb(-1, FRAME_CLEAR_REG); } if ((mir & Q40_IRQ_SER_MASK) || (mir & Q40_IRQ_EXT_MASK)) { mer = master_inb(EIRQ_REG); for (i = 0; eirqs[i].mask; i++) { if (mer & eirqs[i].mask) { irq = eirqs[i].irq;/* * There is a little mess wrt which IRQ really caused this irq request. The * main problem is that IIRQ_REG and EIRQ_REG reflect the state when they * are read - which is long after the request came in. In theory IRQs should * not just go away but they occasionally do */ if (irq > 4 && irq <= 15 && mext_disabled) { /*aliased_irq++;*/ goto iirq; } if (q40_state[irq] & IRQ_INPROGRESS) { /* some handlers do local_irq_enable() for irq latency reasons, */ /* however reentering an active irq handler is not permitted */#ifdef IP_USE_DISABLE /* in theory this is the better way to do it because it still */ /* lets through eg the serial irqs, unfortunately it crashes */ disable_irq(irq); disabled = 1;#else /*printk("IRQ_INPROGRESS detected for irq %d, disabling - %s disabled\n", irq, disabled ? "already" : "not yet"); */ fp->sr = (((fp->sr) & (~0x700))+0x200); disabled = 1;#endif goto iirq; } q40_state[irq] |= IRQ_INPROGRESS; __m68k_handle_int(irq, fp); q40_state[irq] &= ~IRQ_INPROGRESS; /* naively enable everything, if that fails than */ /* this function will be reentered immediately thus */ /* getting another chance to disable the IRQ */ if (disabled) {#ifdef IP_USE_DISABLE if (irq > 4) { disabled = 0; enable_irq(irq); }#else disabled = 0; /*printk("reenabling irq %d\n", irq); */#endif }// used to do 'goto repeat;' here, this delayed bh processing too long return; } } if (mer && ccleirq > 0 && !aliased_irq) { printk("ISA interrupt from unknown source? EIRQ_REG = %x\n",mer); ccleirq--; } } iirq: mir = master_inb(IIRQ_REG); /* should test whether keyboard irq is really enabled, doing it in defhand */ if (mir & Q40_IRQ_KEYB_MASK) __m68k_handle_int(Q40_IRQ_KEYBOARD, fp); return;}void q40_enable_irq(unsigned int irq){ if (irq >= 5 && irq <= 15) { mext_disabled--; if (mext_disabled > 0) printk("q40_enable_irq : nested disable/enable\n"); if (mext_disabled == 0) master_outb(1, EXT_ENABLE_REG); }}void q40_disable_irq(unsigned int irq){ /* disable ISA iqs : only do something if the driver has been * verified to be Q40 "compatible" - right now IDE, NE2K * Any driver should not attempt to sleep across disable_irq !! */ if (irq >= 5 && irq <= 15) { master_outb(0, EXT_ENABLE_REG); mext_disabled++; if (mext_disabled > 1) printk("disable_irq nesting count %d\n",mext_disabled); }}unsigned long q40_probe_irq_on(void){ printk("irq probing not working - reconfigure the driver to avoid this\n"); return -1;}int q40_probe_irq_off(unsigned long irqs){ return -1;}
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?