crash.c

来自「linux 内核源代码」· C语言 代码 · 共 326 行

C
326
字号
/* * Architecture specific (PPC64) functions for kexec based crash dumps. * * Copyright (C) 2005, IBM Corp. * * Created by: Haren Myneni * * This source code is licensed under the GNU General Public License, * Version 2.  See the file COPYING for more details. * */#undef DEBUG#include <linux/kernel.h>#include <linux/smp.h>#include <linux/reboot.h>#include <linux/kexec.h>#include <linux/bootmem.h>#include <linux/crash_dump.h>#include <linux/delay.h>#include <linux/elf.h>#include <linux/elfcore.h>#include <linux/init.h>#include <linux/irq.h>#include <linux/types.h>#include <asm/processor.h>#include <asm/machdep.h>#include <asm/kexec.h>#include <asm/kdump.h>#include <asm/lmb.h>#include <asm/firmware.h>#include <asm/smp.h>#ifdef DEBUG#include <asm/udbg.h>#define DBG(fmt...) udbg_printf(fmt)#else#define DBG(fmt...)#endif/* This keeps a track of which one is crashing cpu. */int crashing_cpu = -1;static cpumask_t cpus_in_crash = CPU_MASK_NONE;cpumask_t cpus_in_sr = CPU_MASK_NONE;#ifdef CONFIG_SMPstatic atomic_t enter_on_soft_reset = ATOMIC_INIT(0);void crash_ipi_callback(struct pt_regs *regs){	int cpu = smp_processor_id();	if (!cpu_online(cpu))		return;	hard_irq_disable();	if (!cpu_isset(cpu, cpus_in_crash))		crash_save_cpu(regs, cpu);	cpu_set(cpu, cpus_in_crash);	/*	 * Entered via soft-reset - could be the kdump	 * process is invoked using soft-reset or user activated	 * it if some CPU did not respond to an IPI.	 * For soft-reset, the secondary CPU can enter this func	 * twice. 1 - using IPI, and 2. soft-reset.	 * Tell the kexec CPU that entered via soft-reset and ready	 * to go down.	 */	if (cpu_isset(cpu, cpus_in_sr)) {		cpu_clear(cpu, cpus_in_sr);		atomic_inc(&enter_on_soft_reset);	}	/*	 * Starting the kdump boot.	 * This barrier is needed to make sure that all CPUs are stopped.	 * If not, soft-reset will be invoked to bring other CPUs.	 */	while (!cpu_isset(crashing_cpu, cpus_in_crash))		cpu_relax();	if (ppc_md.kexec_cpu_down)		ppc_md.kexec_cpu_down(1, 1);#ifdef CONFIG_PPC64	kexec_smp_wait();#else	for (;;);	/* FIXME */#endif	/* NOTREACHED */}/* * Wait until all CPUs are entered via soft-reset. */static void crash_soft_reset_check(int cpu){	unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */	cpu_clear(cpu, cpus_in_sr);	while (atomic_read(&enter_on_soft_reset) != ncpus)		cpu_relax();}static void crash_kexec_prepare_cpus(int cpu){	unsigned int msecs;	unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */	crash_send_ipi(crash_ipi_callback);	smp_wmb();	/*	 * FIXME: Until we will have the way to stop other CPUSs reliabally,	 * the crash CPU will send an IPI and wait for other CPUs to	 * respond.	 * Delay of at least 10 seconds.	 */	printk(KERN_EMERG "Sending IPI to other cpus...\n");	msecs = 10000;	while ((cpus_weight(cpus_in_crash) < ncpus) && (--msecs > 0)) {		cpu_relax();		mdelay(1);	}	/* Would it be better to replace the trap vector here? */	/*	 * FIXME: In case if we do not get all CPUs, one possibility: ask the	 * user to do soft reset such that we get all.	 * Soft-reset will be used until better mechanism is implemented.	 */	if (cpus_weight(cpus_in_crash) < ncpus) {		printk(KERN_EMERG "done waiting: %d cpu(s) not responding\n",			ncpus - cpus_weight(cpus_in_crash));		printk(KERN_EMERG "Activate soft-reset to stop other cpu(s)\n");		cpus_in_sr = CPU_MASK_NONE;		atomic_set(&enter_on_soft_reset, 0);		while (cpus_weight(cpus_in_crash) < ncpus)			cpu_relax();	}	/*	 * Make sure all CPUs are entered via soft-reset if the kdump is	 * invoked using soft-reset.	 */	if (cpu_isset(cpu, cpus_in_sr))		crash_soft_reset_check(cpu);	/* Leave the IPI callback set */}/* * This function will be called by secondary cpus or by kexec cpu * if soft-reset is activated to stop some CPUs. */void crash_kexec_secondary(struct pt_regs *regs){	int cpu = smp_processor_id();	unsigned long flags;	int msecs = 5;	local_irq_save(flags);	/* Wait 5ms if the kexec CPU is not entered yet. */	while (crashing_cpu < 0) {		if (--msecs < 0) {			/*			 * Either kdump image is not loaded or			 * kdump process is not started - Probably xmon			 * exited using 'x'(exit and recover) or			 * kexec_should_crash() failed for all running tasks.			 */			cpu_clear(cpu, cpus_in_sr);			local_irq_restore(flags);			return;		}		mdelay(1);		cpu_relax();	}	if (cpu == crashing_cpu) {		/*		 * Panic CPU will enter this func only via soft-reset.		 * Wait until all secondary CPUs entered and		 * then start kexec boot.		 */		crash_soft_reset_check(cpu);		cpu_set(crashing_cpu, cpus_in_crash);		if (ppc_md.kexec_cpu_down)			ppc_md.kexec_cpu_down(1, 0);		machine_kexec(kexec_crash_image);		/* NOTREACHED */	}	crash_ipi_callback(regs);}#elsestatic void crash_kexec_prepare_cpus(int cpu){	/*	 * move the secondarys to us so that we can copy	 * the new kernel 0-0x100 safely	 *	 * do this if kexec in setup.c ?	 */#ifdef CONFIG_PPC64	smp_release_cpus();#else	/* FIXME */#endif}void crash_kexec_secondary(struct pt_regs *regs){	cpus_in_sr = CPU_MASK_NONE;}#endif#ifdef CONFIG_SPU_BASE#include <asm/spu.h>#include <asm/spu_priv1.h>struct crash_spu_info {	struct spu *spu;	u32 saved_spu_runcntl_RW;	u32 saved_spu_status_R;	u32 saved_spu_npc_RW;	u64 saved_mfc_sr1_RW;	u64 saved_mfc_dar;	u64 saved_mfc_dsisr;};#define CRASH_NUM_SPUS	16	/* Enough for current hardware */static struct crash_spu_info crash_spu_info[CRASH_NUM_SPUS];static void crash_kexec_stop_spus(void){	struct spu *spu;	int i;	u64 tmp;	for (i = 0; i < CRASH_NUM_SPUS; i++) {		if (!crash_spu_info[i].spu)			continue;		spu = crash_spu_info[i].spu;		crash_spu_info[i].saved_spu_runcntl_RW =			in_be32(&spu->problem->spu_runcntl_RW);		crash_spu_info[i].saved_spu_status_R =			in_be32(&spu->problem->spu_status_R);		crash_spu_info[i].saved_spu_npc_RW =			in_be32(&spu->problem->spu_npc_RW);		crash_spu_info[i].saved_mfc_dar    = spu_mfc_dar_get(spu);		crash_spu_info[i].saved_mfc_dsisr  = spu_mfc_dsisr_get(spu);		tmp = spu_mfc_sr1_get(spu);		crash_spu_info[i].saved_mfc_sr1_RW = tmp;		tmp &= ~MFC_STATE1_MASTER_RUN_CONTROL_MASK;		spu_mfc_sr1_set(spu, tmp);		__delay(200);	}}void crash_register_spus(struct list_head *list){	struct spu *spu;	list_for_each_entry(spu, list, full_list) {		if (WARN_ON(spu->number >= CRASH_NUM_SPUS))			continue;		crash_spu_info[spu->number].spu = spu;	}}#elsestatic inline void crash_kexec_stop_spus(void){}#endif /* CONFIG_SPU_BASE */void default_machine_crash_shutdown(struct pt_regs *regs){	unsigned int irq;	/*	 * This function is only called after the system	 * has panicked or is otherwise in a critical state.	 * The minimum amount of code to allow a kexec'd kernel	 * to run successfully needs to happen here.	 *	 * In practice this means stopping other cpus in	 * an SMP system.	 * The kernel is broken so disable interrupts.	 */	hard_irq_disable();	for_each_irq(irq) {		struct irq_desc *desc = irq_desc + irq;		if (desc->status & IRQ_INPROGRESS)			desc->chip->eoi(irq);		if (!(desc->status & IRQ_DISABLED))			desc->chip->disable(irq);	}	/*	 * Make a note of crashing cpu. Will be used in machine_kexec	 * such that another IPI will not be sent.	 */	crashing_cpu = smp_processor_id();	crash_save_cpu(regs, crashing_cpu);	crash_kexec_prepare_cpus(crashing_cpu);	cpu_set(crashing_cpu, cpus_in_crash);	crash_kexec_stop_spus();	if (ppc_md.kexec_cpu_down)		ppc_md.kexec_cpu_down(1, 0);}

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?