dma.c

linux 内核源代码

/* linux/arch/arm/plat-s3c24xx/dma.c
 *
 * Copyright (c) 2003-2005,2006 Simtec Electronics
 *	Ben Dooks <[e-mail]>
 *
 * S3C2410 DMA core
 *
 * http://armlinux.simtec.co.uk/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/


#ifdef CONFIG_S3C2410_DMA_DEBUG
#define DEBUG
#endif

#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/sysdev.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/delay.h>

#include <asm/system.h>
#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/dma.h>

#include <asm/mach/dma.h>
#include <asm/arch/map.h>

#include <asm/plat-s3c24xx/dma.h>

/* io map for dma */
static void __iomem *dma_base;
static struct kmem_cache *dma_kmem;

static int dma_channels;

static struct s3c24xx_dma_selection dma_sel;

/* dma channel state information */
struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];

/* debugging functions */

#define BUF_MAGIC (0xcafebabe)

#define dmawarn(fmt...) printk(KERN_DEBUG fmt)

#define dma_regaddr(chan, reg) ((chan)->regs + (reg))

#if 1
#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
#else
static inline void
dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
{
	pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
	writel(val, dma_regaddr(chan, reg));
}
#endif

#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))

/* captured register state for debug */

struct s3c2410_dma_regstate {
	unsigned long         dcsrc;
	unsigned long         disrc;
	unsigned long         dstat;
	unsigned long         dcon;
	unsigned long         dmsktrig;
};

#ifdef CONFIG_S3C2410_DMA_DEBUG

/* dmadbg_showregs
 *
 * simple debug routine to print the current state of the dma registers
*/

static void
dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
{
	regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
	regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
	regs->dstat    = dma_rdreg(chan, S3C2410_DMA_DSTAT);
	regs->dcon     = dma_rdreg(chan, S3C2410_DMA_DCON);
	regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
}

static void
dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
		 struct s3c2410_dma_regstate *regs)
{
	printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
	       chan->number, fname, line,
	       regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
	       regs->dcon);
}

static void
dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
{
	struct s3c2410_dma_regstate state;

	dmadbg_capture(chan, &state);

	printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
	       chan->number, fname, line, chan->load_state,
	       chan->curr, chan->next, chan->end);

	dmadbg_dumpregs(fname, line, chan, &state);
}

static void
dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
{
	struct s3c2410_dma_regstate state;

	dmadbg_capture(chan, &state);
	dmadbg_dumpregs(fname, line, chan, &state);
}

#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
#else
#define dbg_showregs(chan) do { } while(0)
#define dbg_showchan(chan) do { } while(0)
#endif /* CONFIG_S3C2410_DMA_DEBUG */

static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];

/* lookup_dma_channel
 *
 * change the dma channel number given into a real dma channel id
*/

static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
{
	if (channel & DMACH_LOW_LEVEL)
		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
	else
		return dma_chan_map[channel];
}

/* s3c2410_dma_stats_timeout
 *
 * Update DMA stats from timeout info
*/

static void
s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
{
	if (stats == NULL)
		return;

	if (val > stats->timeout_longest)
		stats->timeout_longest = val;
	if (val < stats->timeout_shortest)
		stats->timeout_shortest = val;

	stats->timeout_avg += val;
}

/* s3c2410_dma_waitforload
 *
 * wait for the DMA engine to load a buffer, and update the state accordingly
*/

static int
s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
{
	int timeout = chan->load_timeout;
	int took;

	if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
		printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
		return 0;
	}

	if (chan->stats != NULL)
		chan->stats->loads++;

	while (--timeout > 0) {
		if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
			took = chan->load_timeout - timeout;

			s3c2410_dma_stats_timeout(chan->stats, took);

			switch (chan->load_state) {
			case S3C2410_DMALOAD_1LOADED:
				chan->load_state = S3C2410_DMALOAD_1RUNNING;
				break;

			default:
				printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
			}

			return 1;
		}
	}

	if (chan->stats != NULL) {
		chan->stats->timeout_failed++;
	}

	return 0;
}



/* s3c2410_dma_loadbuffer
 *
 * load a buffer, and update the channel state
*/

static inline int
s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
		       struct s3c2410_dma_buf *buf)
{
	unsigned long reload;

	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
		 buf, (unsigned long)buf->data, buf->size);

	if (buf == NULL) {
		dmawarn("buffer is NULL\n");
		return -EINVAL;
	}

	/* check the state of the channel before we do anything */

	if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
		dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
	}

	if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
		dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
	}

	/* it would seem sensible if we are the last buffer to not bother
	 * with the auto-reload bit, so that the DMA engine will not try
	 * and load another transfer after this one has finished...
	 */
	if (chan->load_state == S3C2410_DMALOAD_NONE) {
		pr_debug("load_state is none, checking for noreload (next=%p)\n",
			 buf->next);
		reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
	} else {
		//pr_debug("load_state is %d => autoreload\n", chan->load_state);
		reload = S3C2410_DCON_AUTORELOAD;
	}

	if ((buf->data & 0xf0000000) != 0x30000000) {
		dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
	}

	writel(buf->data, chan->addr_reg);

	dma_wrreg(chan, S3C2410_DMA_DCON,
		  chan->dcon | reload | (buf->size/chan->xfer_unit));

	chan->next = buf->next;

	/* update the state of the channel */

	switch (chan->load_state) {
	case S3C2410_DMALOAD_NONE:
		chan->load_state = S3C2410_DMALOAD_1LOADED;
		break;

	case S3C2410_DMALOAD_1RUNNING:
		chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
		break;

	default:
		dmawarn("dmaload: unknown state %d in loadbuffer\n",
			chan->load_state);
		break;
	}

	return 0;
}

/* s3c2410_dma_call_op
 *
 * small routine to call the op routine with the given op if it has been
 * registered
*/

static void
s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
{
	if (chan->op_fn != NULL) {
		(chan->op_fn)(chan, op);
	}
}

/* s3c2410_dma_buffdone
 *
 * small wrapper to check if callback routine needs to be called, and
 * if so, call it
*/

static inline void
s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
		     enum s3c2410_dma_buffresult result)
{
#if 0
	pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
		 chan->callback_fn, buf, buf->id, buf->size, result);
#endif

	if (chan->callback_fn != NULL) {
		(chan->callback_fn)(chan, buf->id, buf->size, result);
	}
}

/* s3c2410_dma_start
 *
 * start a dma channel going
*/

static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
{
	unsigned long tmp;
	unsigned long flags;

	pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);

	local_irq_save(flags);

	if (chan->state == S3C2410_DMA_RUNNING) {
		pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
		local_irq_restore(flags);
		return 0;
	}

	chan->state = S3C2410_DMA_RUNNING;

	/* check wether there is anything to load, and if not, see
	 * if we can find anything to load
	 */

	if (chan->load_state == S3C2410_DMALOAD_NONE) {
		if (chan->next == NULL) {
			printk(KERN_ERR "dma%d: channel has nothing loaded\n",
			       chan->number);
			chan->state = S3C2410_DMA_IDLE;
			local_irq_restore(flags);
			return -EINVAL;
		}

		s3c2410_dma_loadbuffer(chan, chan->next);
	}

	dbg_showchan(chan);

	/* enable the channel */

	if (!chan->irq_enabled) {
		enable_irq(chan->irq);
		chan->irq_enabled = 1;
	}

	/* start the channel going */

	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
	tmp &= ~S3C2410_DMASKTRIG_STOP;
	tmp |= S3C2410_DMASKTRIG_ON;
	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);

	pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);

#if 0
	/* the dma buffer loads should take care of clearing the AUTO
	 * reloading feature */
	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
	tmp &= ~S3C2410_DCON_NORELOAD;
	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
#endif

	s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);

	dbg_showchan(chan);

	/* if we've only loaded one buffer onto the channel, then chec
	 * to see if we have another, and if so, try and load it so when
	 * the first buffer is finished, the new one will be loaded onto
	 * the channel */

	if (chan->next != NULL) {
		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {

			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
				pr_debug("%s: buff not yet loaded, no more todo\n",
					 __FUNCTION__);
			} else {
				chan->load_state = S3C2410_DMALOAD_1RUNNING;
				s3c2410_dma_loadbuffer(chan, chan->next);
			}

		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
			s3c2410_dma_loadbuffer(chan, chan->next);
		}
	}


	local_irq_restore(flags);

	return 0;
}

/* s3c2410_dma_canload
 *
 * work out if we can queue another buffer into the DMA engine
*/

static int
s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
{
	if (chan->load_state == S3C2410_DMALOAD_NONE ||
	    chan->load_state == S3C2410_DMALOAD_1RUNNING)
		return 1;

	return 0;
}

/* s3c2410_dma_enqueue
 *
 * queue an given buffer for dma transfer.
 *
 * id         the device driver's id information for this buffer
 * data       the physical address of the buffer data
 * size       the size of the buffer in bytes
 *
 * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
 * is checked, and if set, the channel is started. If this flag isn't set,
 * then an error will be returned.
 *
 * It is possible to queue more than one DMA buffer onto a channel at
 * once, and the code will deal with the re-loading of the next buffer
 * when necessary.
*/

int s3c2410_dma_enqueue(unsigned int channel, void *id,
			dma_addr_t data, int size)
{
	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
	struct s3c2410_dma_buf *buf;
	unsigned long flags;

	if (chan == NULL)
		return -EINVAL;

	pr_debug("%s: id=%p, data=%08x, size=%d\n",
		 __FUNCTION__, id, (unsigned int)data, size);

	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
	if (buf == NULL) {
		pr_debug("%s: out of memory (%ld alloc)\n",
			 __FUNCTION__, (long)sizeof(*buf));
		return -ENOMEM;
	}

	//pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
	//dbg_showchan(chan);

	buf->next  = NULL;
	buf->data  = buf->ptr = data;
	buf->size  = size;
	buf->id    = id;
	buf->magic = BUF_MAGIC;

	local_irq_save(flags);

	if (chan->curr == NULL) {
		/* we've got nothing loaded... */
		pr_debug("%s: buffer %p queued onto empty channel\n",
			 __FUNCTION__, buf);

		chan->curr = buf;
		chan->end  = buf;
		chan->next = NULL;
	} else {
		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
			 chan->number, __FUNCTION__, buf);

		if (chan->end == NULL)
			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
				 chan->number, __FUNCTION__, chan);