⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 tsc_32.c

📁 linux 内核源代码
💻 C
字号:
#include <linux/sched.h>#include <linux/clocksource.h>#include <linux/workqueue.h>#include <linux/cpufreq.h>#include <linux/jiffies.h>#include <linux/init.h>#include <linux/dmi.h>#include <asm/delay.h>#include <asm/tsc.h>#include <asm/io.h>#include <asm/timer.h>#include "mach_timer.h"static int tsc_enabled;/* * On some systems the TSC frequency does not * change with the cpu frequency. So we need * an extra value to store the TSC freq */unsigned int tsc_khz;EXPORT_SYMBOL_GPL(tsc_khz);int tsc_disable;#ifdef CONFIG_X86_TSCstatic int __init tsc_setup(char *str){	printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "				"cannot disable TSC.\n");	return 1;}#else/* * disable flag for tsc. Takes effect by clearing the TSC cpu flag * in cpu/common.c */static int __init tsc_setup(char *str){	tsc_disable = 1;	return 1;}#endif__setup("notsc", tsc_setup);/* * code to mark and check if the TSC is unstable * due to cpufreq or due to unsynced TSCs */static int tsc_unstable;int check_tsc_unstable(void){	return tsc_unstable;}EXPORT_SYMBOL_GPL(check_tsc_unstable);/* Accelerators for sched_clock() * convert from cycles(64bits) => nanoseconds (64bits) *  basic equation: *		ns = cycles / (freq / ns_per_sec) *		ns = cycles * (ns_per_sec / freq) *		ns = cycles * (10^9 / (cpu_khz * 10^3)) *		ns = cycles * (10^6 / cpu_khz) * *	Then we use scaling math (suggested by george@mvista.com) to get: *		ns = cycles * (10^6 * SC / cpu_khz) / SC *		ns = cycles * cyc2ns_scale / SC * *	And since SC is a constant power of two, we can convert the div *  into a shift. * *  We can use khz divisor instead of mhz to keep a better precision, since *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits. *  (mathieu.desnoyers@polymtl.ca) * *			-johnstul@us.ibm.com "math is hard, lets go shopping!" */unsigned long cyc2ns_scale __read_mostly;#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */static inline void set_cyc2ns_scale(unsigned long cpu_khz){	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;}/* * Scheduler clock - returns current time in nanosec units. */unsigned long long native_sched_clock(void){	unsigned long long this_offset;	/*	 * Fall back to jiffies if there's no TSC available:	 * ( But note that we still use it if the TSC is marked	 *   unstable. We do this because unlike Time Of Day,	 *   the scheduler clock tolerates small errors and it's	 *   very important for it to be as fast as the platform	 *   can achive it. )	 */	if (unlikely(!tsc_enabled && !tsc_unstable))		/* No locking but a rare wrong value is not a big deal: */		return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);	/* read the Time Stamp Counter: */	rdtscll(this_offset);	/* return the value in ns */	return cycles_2_ns(this_offset);}/* We need to define a real function for sched_clock, to override the   weak default version */#ifdef CONFIG_PARAVIRTunsigned long long sched_clock(void){	return paravirt_sched_clock();}#elseunsigned long long sched_clock(void)	__attribute__((alias("native_sched_clock")));#endifunsigned long native_calculate_cpu_khz(void){	unsigned long long start, end;	unsigned long count;	u64 delta64 = (u64)ULLONG_MAX;	int i;	unsigned long flags;	local_irq_save(flags);	/* run 3 times to ensure the cache is warm and to get an accurate reading */	for (i = 0; i < 3; i++) {		mach_prepare_counter();		rdtscll(start);		mach_countup(&count);		rdtscll(end);		/*		 * Error: ECTCNEVERSET		 * The CTC wasn't reliable: we got a hit on the very first read,		 * or the CPU was so fast/slow that the quotient wouldn't fit in		 * 32 bits..		 */		if (count <= 1)			continue;		/* cpu freq too slow: */		if ((end - start) <= CALIBRATE_TIME_MSEC)			continue;		/*		 * We want the minimum time of all runs in case one of them		 * is inaccurate due to SMI or other delay		 */		delta64 = min(delta64, (end - start));	}	/* cpu freq too fast (or every run was bad): */	if (delta64 > (1ULL<<32))		goto err;	delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */	do_div(delta64,CALIBRATE_TIME_MSEC);	local_irq_restore(flags);	return (unsigned long)delta64;err:	local_irq_restore(flags);	return 0;}int recalibrate_cpu_khz(void){#ifndef CONFIG_SMP	unsigned long cpu_khz_old = cpu_khz;	if (cpu_has_tsc) {		cpu_khz = calculate_cpu_khz();		tsc_khz = cpu_khz;		cpu_data(0).loops_per_jiffy =			cpufreq_scale(cpu_data(0).loops_per_jiffy,					cpu_khz_old, cpu_khz);		return 0;	} else		return -ENODEV;#else	return -ENODEV;#endif}EXPORT_SYMBOL(recalibrate_cpu_khz);#ifdef CONFIG_CPU_FREQ/* * if the CPU frequency is scaled, TSC-based delays will need a different * loops_per_jiffy value to function properly. */static unsigned int ref_freq = 0;static unsigned long loops_per_jiffy_ref = 0;static unsigned long cpu_khz_ref = 0;static inttime_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data){	struct cpufreq_freqs *freq = data;	if (!ref_freq) {		if (!freq->old){			ref_freq = freq->new;			return 0;		}		ref_freq = freq->old;		loops_per_jiffy_ref = cpu_data(freq->cpu).loops_per_jiffy;		cpu_khz_ref = cpu_khz;	}	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||	    (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||	    (val == CPUFREQ_RESUMECHANGE)) {		if (!(freq->flags & CPUFREQ_CONST_LOOPS))			cpu_data(freq->cpu).loops_per_jiffy =				cpufreq_scale(loops_per_jiffy_ref,						ref_freq, freq->new);		if (cpu_khz) {			if (num_online_cpus() == 1)				cpu_khz = cpufreq_scale(cpu_khz_ref,						ref_freq, freq->new);			if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {				tsc_khz = cpu_khz;				set_cyc2ns_scale(cpu_khz);				/*				 * TSC based sched_clock turns				 * to junk w/ cpufreq				 */				mark_tsc_unstable("cpufreq changes");			}		}	}	return 0;}static struct notifier_block time_cpufreq_notifier_block = {	.notifier_call	= time_cpufreq_notifier};static int __init cpufreq_tsc(void){	return cpufreq_register_notifier(&time_cpufreq_notifier_block,					 CPUFREQ_TRANSITION_NOTIFIER);}core_initcall(cpufreq_tsc);#endif/* clock source code */static unsigned long current_tsc_khz = 0;static cycle_t read_tsc(void){	cycle_t ret;	rdtscll(ret);	return ret;}static struct clocksource clocksource_tsc = {	.name			= "tsc",	.rating			= 300,	.read			= read_tsc,	.mask			= CLOCKSOURCE_MASK(64),	.mult			= 0, /* to be set */	.shift			= 22,	.flags			= CLOCK_SOURCE_IS_CONTINUOUS |				  CLOCK_SOURCE_MUST_VERIFY,};void mark_tsc_unstable(char *reason){	if (!tsc_unstable) {		tsc_unstable = 1;		tsc_enabled = 0;		printk("Marking TSC unstable due to: %s.\n", reason);		/* Can be called before registration */		if (clocksource_tsc.mult)			clocksource_change_rating(&clocksource_tsc, 0);		else			clocksource_tsc.rating = 0;	}}EXPORT_SYMBOL_GPL(mark_tsc_unstable);static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d){	printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",		       d->ident);	tsc_unstable = 1;	return 0;}/* List of systems that have known TSC problems */static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {	{	 .callback = dmi_mark_tsc_unstable,	 .ident = "IBM Thinkpad 380XD",	 .matches = {		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),		     DMI_MATCH(DMI_BOARD_NAME, "2635FA0"),		     },	 },	 {}};/* * Make an educated guess if the TSC is trustworthy and synchronized * over all CPUs. */__cpuinit int unsynchronized_tsc(void){	if (!cpu_has_tsc || tsc_unstable)		return 1;	/*	 * Intel systems are normally all synchronized.	 * Exceptions must mark TSC as unstable:	 */	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {		/* assume multi socket systems are not synchronized: */		if (num_possible_cpus() > 1)			tsc_unstable = 1;	}	return tsc_unstable;}/* * Geode_LX - the OLPC CPU has a possibly a very reliable TSC */#ifdef CONFIG_MGEODE_LX/* RTSC counts during suspend */#define RTSC_SUSP 0x100static void __init check_geode_tsc_reliable(void){	unsigned long res_low, res_high;	rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);	if (res_low & RTSC_SUSP)		clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;}#elsestatic inline void check_geode_tsc_reliable(void) { }#endifvoid __init tsc_init(void){	if (!cpu_has_tsc || tsc_disable)		goto out_no_tsc;	cpu_khz = calculate_cpu_khz();	tsc_khz = cpu_khz;	if (!cpu_khz)		goto out_no_tsc;	printk("Detected %lu.%03lu MHz processor.\n",				(unsigned long)cpu_khz / 1000,				(unsigned long)cpu_khz % 1000);	set_cyc2ns_scale(cpu_khz);	use_tsc_delay();	/* Check and install the TSC clocksource */	dmi_check_system(bad_tsc_dmi_table);	unsynchronized_tsc();	check_geode_tsc_reliable();	current_tsc_khz = tsc_khz;	clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,							clocksource_tsc.shift);	/* lower the rating if we already know its unstable: */	if (check_tsc_unstable()) {		clocksource_tsc.rating = 0;		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;	} else		tsc_enabled = 1;	clocksource_register(&clocksource_tsc);	return;out_no_tsc:	/*	 * Set the tsc_disable flag if there's no TSC support, this	 * makes it a fast flag for the kernel to see whether it	 * should be using the TSC.	 */	tsc_disable = 1;}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -