⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pm.c

📁 linux 内核源代码
💻 C
字号:
/* -*- linux-c -*- ------------------------------------------------------- * * *   Copyright (C) 1991, 1992 Linus Torvalds *   Copyright 2007 rPath, Inc. - All Rights Reserved * *   This file is part of the Linux kernel, and is made available under *   the terms of the GNU General Public License version 2. * * ----------------------------------------------------------------------- *//* * arch/i386/boot/pm.c * * Prepare the machine for transition to protected mode. */#include "boot.h"#include <asm/segment.h>/* * Invoke the realmode switch hook if present; otherwise * disable all interrupts. */static void realmode_switch_hook(void){	if (boot_params.hdr.realmode_swtch) {		asm volatile("lcallw *%0"			     : : "m" (boot_params.hdr.realmode_swtch)			     : "eax", "ebx", "ecx", "edx");	} else {		asm volatile("cli");		outb(0x80, 0x70); /* Disable NMI */		io_delay();	}}/* * A zImage kernel is loaded at 0x10000 but wants to run at 0x1000. * A bzImage kernel is loaded and runs at 0x100000. */static void move_kernel_around(void){	/* Note: rely on the compile-time option here rather than	   the LOADED_HIGH flag.  The Qemu kernel loader unconditionally	   sets the loadflags to zero. */#ifndef __BIG_KERNEL__	u16 dst_seg, src_seg;	u32 syssize;	dst_seg =  0x1000 >> 4;	src_seg = 0x10000 >> 4;	syssize = boot_params.hdr.syssize; /* Size in 16-byte paragraphs */	while (syssize) {		int paras  = (syssize >= 0x1000) ? 0x1000 : syssize;		int dwords = paras << 2;		asm volatile("pushw %%es ; "			     "pushw %%ds ; "			     "movw %1,%%es ; "			     "movw %2,%%ds ; "			     "xorw %%di,%%di ; "			     "xorw %%si,%%si ; "			     "rep;movsl ; "			     "popw %%ds ; "			     "popw %%es"			     : "+c" (dwords)			     : "r" (dst_seg), "r" (src_seg)			     : "esi", "edi");		syssize -= paras;		dst_seg += paras;		src_seg += paras;	}#endif}/* * Disable all interrupts at the legacy PIC. */static void mask_all_interrupts(void){	outb(0xff, 0xa1);	/* Mask all interrupts on the secondary PIC */	io_delay();	outb(0xfb, 0x21);	/* Mask all but cascade on the primary PIC */	io_delay();}/* * Reset IGNNE# if asserted in the FPU. */static void reset_coprocessor(void){	outb(0, 0xf0);	io_delay();	outb(0, 0xf1);	io_delay();}/* * Set up the GDT */#define GDT_ENTRY(flags,base,limit)		\	(((u64)(base & 0xff000000) << 32) |	\	 ((u64)flags << 40) |			\	 ((u64)(limit & 0x00ff0000) << 32) |	\	 ((u64)(base & 0x00ffff00) << 16) |	\	 ((u64)(limit & 0x0000ffff)))struct gdt_ptr {	u16 len;	u32 ptr;} __attribute__((packed));static void setup_gdt(void){	/* There are machines which are known to not boot with the GDT	   being 8-byte unaligned.  Intel recommends 16 byte alignment. */	static const u64 boot_gdt[] __attribute__((aligned(16))) = {		/* CS: code, read/execute, 4 GB, base 0 */		[GDT_ENTRY_BOOT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff),		/* DS: data, read/write, 4 GB, base 0 */		[GDT_ENTRY_BOOT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff),	};	/* Xen HVM incorrectly stores a pointer to the gdt_ptr, instead	   of the gdt_ptr contents.  Thus, make it static so it will	   stay in memory, at least long enough that we switch to the	   proper kernel GDT. */	static struct gdt_ptr gdt;	gdt.len = sizeof(boot_gdt)-1;	gdt.ptr = (u32)&boot_gdt + (ds() << 4);	asm volatile("lgdtl %0" : : "m" (gdt));}/* * Set up the IDT */static void setup_idt(void){	static const struct gdt_ptr null_idt = {0, 0};	asm volatile("lidtl %0" : : "m" (null_idt));}/* * Actual invocation sequence */void go_to_protected_mode(void){	/* Hook before leaving real mode, also disables interrupts */	realmode_switch_hook();	/* Move the kernel/setup to their final resting places */	move_kernel_around();	/* Enable the A20 gate */	if (enable_a20()) {		puts("A20 gate not responding, unable to boot...\n");		die();	}	/* Reset coprocessor (IGNNE#) */	reset_coprocessor();	/* Mask all interrupts in the PIC */	mask_all_interrupts();	/* Actual transition to protected mode... */	setup_idt();	setup_gdt();	protected_mode_jump(boot_params.hdr.code32_start,			    (u32)&boot_params + (ds() << 4));}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -