⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 ops-tx4927.c

📁 linux 内核源代码
💻 C
字号:
/* * Copyright 2001 MontaVista Software Inc. * Author: MontaVista Software, Inc. *              ahennessy@mvista.com * * Copyright (C) 2000-2001 Toshiba Corporation * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * * Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c * *     Define the pci_ops for the Toshiba rbtx4927 * * Much of the code is derived from the original DDB5074 port by * Geert Uytterhoeven <geert@sonycom.com> * * Copyright 2004 MontaVista Software Inc. * Author: Manish Lachwani (mlachwani@mvista.com) * *  This program is free software; you can redistribute  it and/or modify it *  under  the terms of  the GNU General  Public License as published by the *  Free Software Foundation;  either version 2 of the  License, or (at your *  option) any later version. * *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT, *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *  You should have received a copy of the  GNU General Public License along *  with this program; if not, write  to the Free Software Foundation, Inc., *  675 Mass Ave, Cambridge, MA 02139, USA. */#include <linux/types.h>#include <linux/pci.h>#include <linux/kernel.h>#include <linux/init.h>#include <asm/addrspace.h>#include <asm/byteorder.h>#include <asm/tx4927/tx4927_pci.h>/* initialize in setup */struct resource pci_io_resource = {	.name	= "TX4927 PCI IO SPACE",	.start	= 0x1000,	.end	= (0x1000 + (TX4927_PCIIO_SIZE)) - 1,	.flags	= IORESOURCE_IO};/* initialize in setup */struct resource pci_mem_resource = {	.name	= "TX4927 PCI MEM SPACE",	.start	= TX4927_PCIMEM,	.end	= TX4927_PCIMEM + TX4927_PCIMEM_SIZE - 1,	.flags	= IORESOURCE_MEM};static int mkaddr(int bus, int dev_fn, int where, int *flagsp){	if (bus > 0) {		/* Type 1 configuration */		tx4927_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1;	} else {		if (dev_fn >= PCI_DEVFN(TX4927_PCIC_MAX_DEVNU, 0))			return -1;		/* Type 0 configuration */		tx4927_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc);	}	/* clear M_ABORT and Disable M_ABORT Int. */	tx4927_pcicptr->pcistatus =	    (tx4927_pcicptr->pcistatus & 0x0000ffff) |	    (PCI_STATUS_REC_MASTER_ABORT << 16);	tx4927_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT;	return 0;}static int check_abort(int flags){	int code = PCIBIOS_SUCCESSFUL;	if (tx4927_pcicptr->	    pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) {		tx4927_pcicptr->pcistatus =		    (tx4927_pcicptr->		     pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT						<< 16);		tx4927_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT;		code = PCIBIOS_DEVICE_NOT_FOUND;	}	return code;}static int tx4927_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, int where,		int size, u32 * val){	int flags, retval, dev, busno, func;	busno = bus->number;        dev = PCI_SLOT(devfn);        func = PCI_FUNC(devfn);	/* check if the bus is top-level */	if (bus->parent != NULL) {		busno = bus->number;	} else {		busno = 0;	}	if (mkaddr(busno, devfn, where, &flags))		return -1;	switch (size) {	case 1:		*val = *(volatile u8 *) ((unsigned long) & tx4927_pcicptr->                              g2pcfgdata |#ifdef __LITTLE_ENDIAN						(where & 3));#else						((where & 0x3) ^ 0x3));#endif		break;	case 2:		*val = *(volatile u16 *) ((unsigned long) & tx4927_pcicptr->                               g2pcfgdata |#ifdef __LITTLE_ENDIAN						(where & 3));#else						((where & 0x3) ^ 0x2));#endif		break;	case 4:		*val = tx4927_pcicptr->g2pcfgdata;		break;	}	retval = check_abort(flags);	if (retval == PCIBIOS_DEVICE_NOT_FOUND)		*val = 0xffffffff;	return retval;}static int tx4927_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where,				int size, u32 val){	int flags, dev, busno, func;	busno = bus->number;        dev = PCI_SLOT(devfn);        func = PCI_FUNC(devfn);	/* check if the bus is top-level */	if (bus->parent != NULL) {		busno = bus->number;	} else {		busno = 0;	}	if (mkaddr(busno, devfn, where, &flags))		return -1;	switch (size) {	case 1:		 *(volatile u8 *) ((unsigned long) & tx4927_pcicptr->                          g2pcfgdata |#ifdef __LITTLE_ENDIAN					(where & 3)) = val;#else					((where & 0x3) ^ 0x3)) = val;#endif		break;	case 2:		*(volatile u16 *) ((unsigned long) & tx4927_pcicptr->                           g2pcfgdata |#ifdef __LITTLE_ENDIAN					(where & 3)) = val;#else					((where & 0x3) ^ 0x2)) = val;#endif		break;	case 4:		tx4927_pcicptr->g2pcfgdata = val;		break;	}	return check_abort(flags);}struct pci_ops tx4927_pci_ops = {	tx4927_pcibios_read_config,	tx4927_pcibios_write_config};/* * h/w only supports devices 0x00 to 0x14 */struct pci_controller tx4927_controller = {	.pci_ops        = &tx4927_pci_ops,	.io_resource    = &pci_io_resource,	.mem_resource   = &pci_mem_resource,};

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -