📄 malta_setup.c
字号:
/* * Carsten Langgaard, carstenl@mips.com * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as * published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. */#include <linux/init.h>#include <linux/sched.h>#include <linux/ioport.h>#include <linux/pci.h>#include <linux/screen_info.h>#include <asm/cpu.h>#include <asm/bootinfo.h>#include <asm/irq.h>#include <asm/mips-boards/generic.h>#include <asm/mips-boards/prom.h>#include <asm/mips-boards/malta.h>#include <asm/mips-boards/maltaint.h>#include <asm/dma.h>#include <asm/time.h>#include <asm/traps.h>#ifdef CONFIG_VT#include <linux/console.h>#endifextern void mips_reboot_setup(void);extern unsigned long mips_rtc_get_time(void);#ifdef CONFIG_KGDBextern void kgdb_config(void);#endifstruct resource standard_io_resources[] = { { .name = "dma1", .start = 0x00, .end = 0x1f, .flags = IORESOURCE_BUSY }, { .name = "timer", .start = 0x40, .end = 0x5f, .flags = IORESOURCE_BUSY }, { .name = "keyboard", .start = 0x60, .end = 0x6f, .flags = IORESOURCE_BUSY }, { .name = "dma page reg", .start = 0x80, .end = 0x8f, .flags = IORESOURCE_BUSY }, { .name = "dma2", .start = 0xc0, .end = 0xdf, .flags = IORESOURCE_BUSY },};const char *get_system_type(void){ return "MIPS Malta";}#if defined(CONFIG_MIPS_MT_SMTC)const char display_string[] = " SMTC LINUX ON MALTA ";#elseconst char display_string[] = " LINUX ON MALTA ";#endif /* CONFIG_MIPS_MT_SMTC */#ifdef CONFIG_BLK_DEV_FDvoid __init fd_activate(void){ /* * Activate Floppy Controller in the SMSC FDC37M817 Super I/O * Controller. * Done by YAMON 2.00 onwards */ /* Entering config state. */ SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG); /* Activate floppy controller. */ SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG); SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG); SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG); SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG); /* Exit config state. */ SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG);}#endifvoid __init plat_mem_setup(void){ unsigned int i; mips_pcibios_init(); /* Request I/O space for devices used on the Malta board. */ for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) request_resource(&ioport_resource, standard_io_resources+i); /* * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge. */ enable_dma(4);#ifdef CONFIG_KGDB kgdb_config();#endif if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO) { char *argptr; argptr = prom_getcmdline(); if (strstr(argptr, "debug")) { BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE; printk("Enabled Bonito debug mode\n"); } else BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE;#ifdef CONFIG_DMA_COHERENT if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) { BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN; printk("Enabled Bonito CPU coherency\n"); argptr = prom_getcmdline(); if (strstr(argptr, "iobcuncached")) { BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN; BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); printk("Disabled Bonito IOBC coherency\n"); } else { BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN; BONITO_PCIMEMBASECFG |= (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); printk("Enabled Bonito IOBC coherency\n"); } } else panic("Hardware DMA cache coherency not supported");#endif }#ifdef CONFIG_DMA_COHERENT else { panic("Hardware DMA cache coherency not supported"); }#endif#ifdef CONFIG_BLK_DEV_IDE /* Check PCI clock */ { unsigned int __iomem *jmpr_p = (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int)); int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07; static const int pciclocks[] __initdata = { 33, 20, 25, 30, 12, 16, 37, 10 }; int pciclock = pciclocks[jmpr]; char *argptr = prom_getcmdline(); if (pciclock != 33 && !strstr (argptr, "idebus=")) { printk("WARNING: PCI clock is %dMHz, setting idebus\n", pciclock); argptr += strlen(argptr); sprintf(argptr, " idebus=%d", pciclock); if (pciclock < 20 || pciclock > 66) printk("WARNING: IDE timing calculations will be incorrect\n"); } }#endif#ifdef CONFIG_BLK_DEV_FD fd_activate();#endif#ifdef CONFIG_VT#if defined(CONFIG_VGA_CONSOLE) screen_info = (struct screen_info) { 0, 25, /* orig-x, orig-y */ 0, /* unused */ 0, /* orig-video-page */ 0, /* orig-video-mode */ 80, /* orig-video-cols */ 0, 0, 0, /* ega_ax, ega_bx, ega_cx */ 25, /* orig-video-lines */ VIDEO_TYPE_VGAC, /* orig-video-isVGA */ 16 /* orig-video-points */ };#endif#endif mips_reboot_setup();}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -