📄 setup.c
字号:
/* * Copyright (C) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *//* * Setup code for the SWARM board */#include <linux/spinlock.h>#include <linux/mm.h>#include <linux/bootmem.h>#include <linux/blkdev.h>#include <linux/init.h>#include <linux/kernel.h>#include <linux/screen_info.h>#include <linux/initrd.h>#include <asm/irq.h>#include <asm/io.h>#include <asm/bootinfo.h>#include <asm/mipsregs.h>#include <asm/reboot.h>#include <asm/time.h>#include <asm/traps.h>#include <asm/sibyte/sb1250.h>#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)#include <asm/sibyte/bcm1480_regs.h>#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)#include <asm/sibyte/sb1250_regs.h>#else#error invalid SiByte board configuration#endif#include <asm/sibyte/sb1250_genbus.h>#include <asm/sibyte/board.h>#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)extern void bcm1480_setup(void);#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)extern void sb1250_setup(void);#else#error invalid SiByte board configuration#endifextern int xicor_probe(void);extern int xicor_set_time(unsigned long);extern unsigned long xicor_get_time(void);extern int m41t81_probe(void);extern int m41t81_set_time(unsigned long);extern unsigned long m41t81_get_time(void);const char *get_system_type(void){ return "SiByte " SIBYTE_BOARD_NAME;}int swarm_be_handler(struct pt_regs *regs, int is_fixup){ if (!is_fixup && (regs->cp0_cause & 4)) { /* Data bus error - print PA */ printk("DBE physical address: %010Lx\n", __read_64bit_c0_register($26, 1)); } return (is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL);}enum swarm_rtc_type { RTC_NONE, RTC_XICOR, RTC_M4LT81};enum swarm_rtc_type swarm_rtc_type;unsigned long read_persistent_clock(void){ switch (swarm_rtc_type) { case RTC_XICOR: return xicor_get_time(); case RTC_M4LT81: return m41t81_get_time(); case RTC_NONE: default: return mktime(2000, 1, 1, 0, 0, 0); }}int rtc_mips_set_time(unsigned long sec){ switch (swarm_rtc_type) { case RTC_XICOR: return xicor_set_time(sec); case RTC_M4LT81: return m41t81_set_time(sec); case RTC_NONE: default: return -1; }}void __init plat_mem_setup(void){#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) bcm1480_setup();#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) sb1250_setup();#else#error invalid SiByte board configuration#endif panic_timeout = 5; /* For debug. */ board_be_handler = swarm_be_handler; if (xicor_probe()) swarm_rtc_type = RTC_XICOR; if (m41t81_probe()) swarm_rtc_type = RTC_M4LT81; printk("This kernel optimized for "#ifdef CONFIG_SIMULATION "simulation"#else "board"#endif " runs "#ifdef CONFIG_SIBYTE_CFE "with"#else "without"#endif " CFE\n");#ifdef CONFIG_VT screen_info = (struct screen_info) { 0, 0, /* orig-x, orig-y */ 0, /* unused */ 52, /* orig_video_page */ 3, /* orig_video_mode */ 80, /* orig_video_cols */ 4626, 3, 9, /* unused, ega_bx, unused */ 25, /* orig_video_lines */ 0x22, /* orig_video_isVGA */ 16 /* orig_video_points */ }; /* XXXKW for CFE, get lines/cols from environment */#endif}#ifdef LEDS_PHYS#ifdef CONFIG_SIBYTE_CARMEL/* XXXKW need to detect Monterey/LittleSur/etc */#undef LEDS_PHYS#define LEDS_PHYS MLEDS_PHYS#endifvoid setleds(char *str){ void *reg; int i; for (i = 0; i < 4; i++) { reg = IOADDR(LEDS_PHYS) + 0x20 + ((3 - i) << 3); if (!str[i]) writeb(' ', reg); else writeb(str[i], reg); }}#endif /* LEDS_PHYS */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -