⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 setup.c

📁 linux 内核源代码
💻 C
字号:
/* * $Id: setup.c,v 1.4 2003/08/03 03:05:10 lethal Exp $ * * Setup and IRQ handling code for the HD64465 companion chip. * by Greg Banks <gbanks@pocketpenguins.com> * Copyright (c) 2000 PocketPenguins Inc * * Derived from setup_hd64461.c which bore the message: * Copyright (C) 2000 YAEGASHI Takeshi */#include <linux/sched.h>#include <linux/module.h>#include <linux/kernel.h>#include <linux/param.h>#include <linux/ioport.h>#include <linux/interrupt.h>#include <linux/init.h>#include <linux/irq.h>#include <asm/io.h>#include <asm/irq.h>#include <asm/hd64465/hd64465.h>static void disable_hd64465_irq(unsigned int irq){	unsigned short nimr;	unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);    	pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask);	nimr = inw(HD64465_REG_NIMR);	nimr |= mask;	outw(nimr, HD64465_REG_NIMR);}static void enable_hd64465_irq(unsigned int irq){	unsigned short nimr;	unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);    	pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask);	nimr = inw(HD64465_REG_NIMR);	nimr &= ~mask;	outw(nimr, HD64465_REG_NIMR);}static void mask_and_ack_hd64465(unsigned int irq){	disable_hd64465_irq(irq);}static void end_hd64465_irq(unsigned int irq){	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))		enable_hd64465_irq(irq);}static unsigned int startup_hd64465_irq(unsigned int irq){ 	enable_hd64465_irq(irq);	return 0;}static void shutdown_hd64465_irq(unsigned int irq){	disable_hd64465_irq(irq);}static struct hw_interrupt_type hd64465_irq_type = {	.typename	= "HD64465-IRQ",	.startup	= startup_hd64465_irq,	.shutdown	= shutdown_hd64465_irq,	.enable		= enable_hd64465_irq,	.disable	= disable_hd64465_irq,	.ack		= mask_and_ack_hd64465,	.end		= end_hd64465_irq,};static irqreturn_t hd64465_interrupt(int irq, void *dev_id){	printk(KERN_INFO	       "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n",	       inw(HD64465_REG_NIRR), inw(HD64465_REG_NIMR));	return IRQ_NONE;}/*====================================================*//* * Support for a secondary IRQ demux step.  This is necessary * because the HD64465 presents a very thin interface to the * PCMCIA bus; a lot of features (such as remapping interrupts) * normally done in hardware by other PCMCIA host bridges is * instead done in software. */static struct{    int (*func)(int, void *);    void *dev;} hd64465_demux[HD64465_IRQ_NUM];void hd64465_register_irq_demux(int irq,		int (*demux)(int irq, void *dev), void *dev){    	hd64465_demux[irq - HD64465_IRQ_BASE].func = demux;    	hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev;}EXPORT_SYMBOL(hd64465_register_irq_demux);void hd64465_unregister_irq_demux(int irq){    	hd64465_demux[irq - HD64465_IRQ_BASE].func = 0;}EXPORT_SYMBOL(hd64465_unregister_irq_demux);int hd64465_irq_demux(int irq){	if (irq == CONFIG_HD64465_IRQ) {		unsigned short i, bit;		unsigned short nirr = inw(HD64465_REG_NIRR);		unsigned short nimr = inw(HD64465_REG_NIMR);    	    	pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr);		nirr &= ~nimr;		for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++)		    if (nirr & bit)		    	break;    	    	if (i < HD64465_IRQ_NUM) {		    irq = HD64465_IRQ_BASE + i;    	    	    if (hd64465_demux[i].func != 0)		    	irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev);		}	}	return irq;}static struct irqaction irq0  = {	.handler = hd64465_interrupt,	.flags = IRQF_DISABLED,	.mask = CPU_MASK_NONE,	.name = "HD64465",};static int __init setup_hd64465(void){	int i;	unsigned short rev;	unsigned short smscr;	if (!MACH_HD64465)		return 0;	printk(KERN_INFO "HD64465 configured at 0x%x on irq %d(mapped into %d to %d)\n",	       CONFIG_HD64465_IOBASE,	       CONFIG_HD64465_IRQ,	       HD64465_IRQ_BASE,	       HD64465_IRQ_BASE+HD64465_IRQ_NUM-1);	if (inw(HD64465_REG_SDID) != HD64465_SDID) {		printk(KERN_ERR "HD64465 device ID not found, check base address\n");	}	rev = inw(HD64465_REG_SRR);	printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff);	       	outw(0xffff, HD64465_REG_NIMR); 	/* mask all interrupts */	for (i = 0; i < HD64465_IRQ_NUM ; i++) {		irq_desc[HD64465_IRQ_BASE + i].chip = &hd64465_irq_type;	}	setup_irq(CONFIG_HD64465_IRQ, &irq0);#ifdef CONFIG_SERIAL	/* wake up the UART from STANDBY at this point */	smscr = inw(HD64465_REG_SMSCR);	outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR);	/* remap IO ports for first ISA serial port to HD64465 UART */	hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1);#endif	return 0;}module_init(setup_hd64465);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -