⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 extmem.c

📁 linux 内核源代码
💻 C
字号:
/* * File...........: arch/s390/mm/extmem.c * Author(s)......: Carsten Otte <cotte@de.ibm.com> * 		    Rob M van der Heij <rvdheij@nl.ibm.com> * 		    Steven Shultz <shultzss@us.ibm.com> * Bugreports.to..: <Linux390@de.ibm.com> * (C) IBM Corporation 2002-2004 */#include <linux/kernel.h>#include <linux/string.h>#include <linux/spinlock.h>#include <linux/list.h>#include <linux/slab.h>#include <linux/module.h>#include <linux/bootmem.h>#include <linux/ctype.h>#include <linux/ioport.h>#include <asm/page.h>#include <asm/pgtable.h>#include <asm/ebcdic.h>#include <asm/errno.h>#include <asm/extmem.h>#include <asm/cpcmd.h>#include <asm/setup.h>#define DCSS_DEBUG	/* Debug messages on/off */#define DCSS_NAME "extmem"#ifdef DCSS_DEBUG#define PRINT_DEBUG(x...)	printk(KERN_DEBUG DCSS_NAME " debug:" x)#else#define PRINT_DEBUG(x...)   do {} while (0)#endif#define PRINT_INFO(x...)	printk(KERN_INFO DCSS_NAME " info:" x)#define PRINT_WARN(x...)	printk(KERN_WARNING DCSS_NAME " warning:" x)#define PRINT_ERR(x...)		printk(KERN_ERR DCSS_NAME " error:" x)#define DCSS_LOADSHR    0x00#define DCSS_LOADNSR    0x04#define DCSS_PURGESEG   0x08#define DCSS_FINDSEG    0x0c#define DCSS_LOADNOLY   0x10#define DCSS_SEGEXT     0x18#define DCSS_FINDSEGA   0x0cstruct qrange {	unsigned int  start; // 3byte start address, 1 byte type	unsigned int  end;   // 3byte end address, 1 byte reserved};struct qout64 {	int segstart;	int segend;	int segcnt;	int segrcnt;	struct qrange range[6];};struct qin64 {	char qopcode;	char rsrv1[3];	char qrcode;	char rsrv2[3];	char qname[8];	unsigned int qoutptr;	short int qoutlen;};struct dcss_segment {	struct list_head list;	char dcss_name[8];	char res_name[15];	unsigned long start_addr;	unsigned long end;	atomic_t ref_count;	int do_nonshared;	unsigned int vm_segtype;	struct qrange range[6];	int segcnt;	struct resource *res;};static DEFINE_MUTEX(dcss_lock);static struct list_head dcss_list = LIST_HEAD_INIT(dcss_list);static char *segtype_string[] = { "SW", "EW", "SR", "ER", "SN", "EN", "SC",					"EW/EN-MIXED" };/* * Create the 8 bytes, ebcdic VM segment name from * an ascii name. */static voiddcss_mkname(char *name, char *dcss_name){	int i;	for (i = 0; i < 8; i++) {		if (name[i] == '\0')			break;		dcss_name[i] = toupper(name[i]);	};	for (; i < 8; i++)		dcss_name[i] = ' ';	ASCEBC(dcss_name, 8);}/* * search all segments in dcss_list, and return the one * namend *name. If not found, return NULL. */static struct dcss_segment *segment_by_name (char *name){	char dcss_name[9];	struct list_head *l;	struct dcss_segment *tmp, *retval = NULL;	BUG_ON(!mutex_is_locked(&dcss_lock));	dcss_mkname (name, dcss_name);	list_for_each (l, &dcss_list) {		tmp = list_entry (l, struct dcss_segment, list);		if (memcmp(tmp->dcss_name, dcss_name, 8) == 0) {			retval = tmp;			break;		}	}	return retval;}/* * Perform a function on a dcss segment. */static inline intdcss_diag (__u8 func, void *parameter,           unsigned long *ret1, unsigned long *ret2){	unsigned long rx, ry;	int rc;	rx = (unsigned long) parameter;	ry = (unsigned long) func;	asm volatile(#ifdef CONFIG_64BIT		"	sam31\n"		"	diag	%0,%1,0x64\n"		"	sam64\n"#else		"	diag	%0,%1,0x64\n"#endif		"	ipm	%2\n"		"	srl	%2,28\n"		: "+d" (rx), "+d" (ry), "=d" (rc) : : "cc");	*ret1 = rx;	*ret2 = ry;	return rc;}static inline intdcss_diag_translate_rc (int vm_rc) {	if (vm_rc == 44)		return -ENOENT;	return -EIO;}/* do a diag to get info about a segment. * fills start_address, end and vm_segtype fields */static intquery_segment_type (struct dcss_segment *seg){	struct qin64  *qin = kmalloc (sizeof(struct qin64), GFP_DMA);	struct qout64 *qout = kmalloc (sizeof(struct qout64), GFP_DMA);	int diag_cc, rc, i;	unsigned long dummy, vmrc;	if ((qin == NULL) || (qout == NULL)) {		rc = -ENOMEM;		goto out_free;	}	/* initialize diag input parameters */	qin->qopcode = DCSS_FINDSEGA;	qin->qoutptr = (unsigned long) qout;	qin->qoutlen = sizeof(struct qout64);	memcpy (qin->qname, seg->dcss_name, 8);	diag_cc = dcss_diag (DCSS_SEGEXT, qin, &dummy, &vmrc);	if (diag_cc > 1) {		PRINT_WARN ("segment_type: diag returned error %ld\n", vmrc);		rc = dcss_diag_translate_rc (vmrc);		goto out_free;	}	if (qout->segcnt > 6) {		rc = -ENOTSUPP;		goto out_free;	}	if (qout->segcnt == 1) {		seg->vm_segtype = qout->range[0].start & 0xff;	} else {		/* multi-part segment. only one type supported here:		    - all parts are contiguous		    - all parts are either EW or EN type		    - maximum 6 parts allowed */		unsigned long start = qout->segstart >> PAGE_SHIFT;		for (i=0; i<qout->segcnt; i++) {			if (((qout->range[i].start & 0xff) != SEG_TYPE_EW) &&			    ((qout->range[i].start & 0xff) != SEG_TYPE_EN)) {				rc = -ENOTSUPP;				goto out_free;			}			if (start != qout->range[i].start >> PAGE_SHIFT) {				rc = -ENOTSUPP;				goto out_free;			}			start = (qout->range[i].end >> PAGE_SHIFT) + 1;		}		seg->vm_segtype = SEG_TYPE_EWEN;	}	/* analyze diag output and update seg */	seg->start_addr = qout->segstart;	seg->end = qout->segend;	memcpy (seg->range, qout->range, 6*sizeof(struct qrange));	seg->segcnt = qout->segcnt;	rc = 0; out_free:	kfree(qin);	kfree(qout);	return rc;}/* * get info about a segment * possible return values: * -ENOSYS  : we are not running on VM * -EIO     : could not perform query diagnose * -ENOENT  : no such segment * -ENOTSUPP: multi-part segment cannot be used with linux * -ENOSPC  : segment cannot be used (overlaps with storage) * -ENOMEM  : out of memory * 0 .. 6   : type of segment as defined in include/asm-s390/extmem.h */intsegment_type (char* name){	int rc;	struct dcss_segment seg;	if (!MACHINE_IS_VM)		return -ENOSYS;	dcss_mkname(name, seg.dcss_name);	rc = query_segment_type (&seg);	if (rc < 0)		return rc;	return seg.vm_segtype;}/* * real segment loading function, called from segment_load */static int__segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long *end){	struct dcss_segment *seg = kmalloc(sizeof(struct dcss_segment),			GFP_DMA);	int dcss_command, rc, diag_cc;	if (seg == NULL) {		rc = -ENOMEM;		goto out;	}	dcss_mkname (name, seg->dcss_name);	rc = query_segment_type (seg);	if (rc < 0)		goto out_free;	rc = add_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1);	switch (rc) {	case 0:		break;	case -ENOSPC:		PRINT_WARN("segment_load: not loading segment %s - overlaps "			   "storage/segment\n", name);		goto out_free;	case -ERANGE:		PRINT_WARN("segment_load: not loading segment %s - exceeds "			   "kernel mapping range\n", name);		goto out_free;	default:		PRINT_WARN("segment_load: not loading segment %s (rc: %d)\n",			   name, rc);		goto out_free;	}	seg->res = kzalloc(sizeof(struct resource), GFP_KERNEL);	if (seg->res == NULL) {		rc = -ENOMEM;		goto out_shared;	}	seg->res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;	seg->res->start = seg->start_addr;	seg->res->end = seg->end;	memcpy(&seg->res_name, seg->dcss_name, 8);	EBCASC(seg->res_name, 8);	seg->res_name[8] = '\0';	strncat(seg->res_name, " (DCSS)", 7);	seg->res->name = seg->res_name;	rc = seg->vm_segtype;	if (rc == SEG_TYPE_SC ||	    ((rc == SEG_TYPE_SR || rc == SEG_TYPE_ER) && !do_nonshared))		seg->res->flags |= IORESOURCE_READONLY;	if (request_resource(&iomem_resource, seg->res)) {		rc = -EBUSY;		kfree(seg->res);		goto out_shared;	}	if (do_nonshared)		dcss_command = DCSS_LOADNSR;	else		dcss_command = DCSS_LOADNOLY;	diag_cc = dcss_diag(dcss_command, seg->dcss_name,			&seg->start_addr, &seg->end);	if (diag_cc > 1) {		PRINT_WARN ("segment_load: could not load segment %s - "				"diag returned error (%ld)\n",name,seg->end);		rc = dcss_diag_translate_rc (seg->end);		dcss_diag(DCSS_PURGESEG, seg->dcss_name,				&seg->start_addr, &seg->end);		goto out_resource;	}	seg->do_nonshared = do_nonshared;	atomic_set(&seg->ref_count, 1);	list_add(&seg->list, &dcss_list);	*addr = seg->start_addr;	*end  = seg->end;	if (do_nonshared)		PRINT_INFO ("segment_load: loaded segment %s range %p .. %p "				"type %s in non-shared mode\n", name,				(void*)seg->start_addr, (void*)seg->end,				segtype_string[seg->vm_segtype]);	else {		PRINT_INFO ("segment_load: loaded segment %s range %p .. %p "				"type %s in shared mode\n", name,				(void*)seg->start_addr, (void*)seg->end,				segtype_string[seg->vm_segtype]);	}	goto out; out_resource:	release_resource(seg->res);	kfree(seg->res); out_shared:	remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1); out_free:	kfree(seg); out:	return rc;}/* * this function loads a DCSS segment * name         : name of the DCSS * do_nonshared : 0 indicates that the dcss should be shared with other linux images *                1 indicates that the dcss should be exclusive for this linux image * addr         : will be filled with start address of the segment * end          : will be filled with end address of the segment * return values: * -ENOSYS  : we are not running on VM * -EIO     : could not perform query or load diagnose * -ENOENT  : no such segment * -ENOTSUPP: multi-part segment cannot be used with linux * -ENOSPC  : segment cannot be used (overlaps with storage) * -EBUSY   : segment can temporarily not be used (overlaps with dcss) * -ERANGE  : segment cannot be used (exceeds kernel mapping range) * -EPERM   : segment is currently loaded with incompatible permissions * -ENOMEM  : out of memory * 0 .. 6   : type of segment as defined in include/asm-s390/extmem.h */intsegment_load (char *name, int do_nonshared, unsigned long *addr,		unsigned long *end){	struct dcss_segment *seg;	int rc;	if (!MACHINE_IS_VM)		return -ENOSYS;	mutex_lock(&dcss_lock);	seg = segment_by_name (name);	if (seg == NULL)		rc = __segment_load (name, do_nonshared, addr, end);	else {		if (do_nonshared == seg->do_nonshared) {			atomic_inc(&seg->ref_count);			*addr = seg->start_addr;			*end  = seg->end;			rc    = seg->vm_segtype;		} else {			*addr = *end = 0;			rc    = -EPERM;		}	}	mutex_unlock(&dcss_lock);	return rc;}/* * this function modifies the shared state of a DCSS segment. note that * name         : name of the DCSS * do_nonshared : 0 indicates that the dcss should be shared with other linux images *                1 indicates that the dcss should be exclusive for this linux image * return values: * -EIO     : could not perform load diagnose (segment gone!) * -ENOENT  : no such segment (segment gone!) * -EAGAIN  : segment is in use by other exploiters, try later * -EINVAL  : no segment with the given name is currently loaded - name invalid * -EBUSY   : segment can temporarily not be used (overlaps with dcss) * 0	    : operation succeeded */intsegment_modify_shared (char *name, int do_nonshared){	struct dcss_segment *seg;	unsigned long dummy;	int dcss_command, rc, diag_cc;	mutex_lock(&dcss_lock);	seg = segment_by_name (name);	if (seg == NULL) {		rc = -EINVAL;		goto out_unlock;	}	if (do_nonshared == seg->do_nonshared) {		PRINT_INFO ("segment_modify_shared: not reloading segment %s"				" - already in requested mode\n",name);		rc = 0;		goto out_unlock;	}	if (atomic_read (&seg->ref_count) != 1) {		PRINT_WARN ("segment_modify_shared: not reloading segment %s - "				"segment is in use by other driver(s)\n",name);		rc = -EAGAIN;		goto out_unlock;	}	release_resource(seg->res);	if (do_nonshared) {		dcss_command = DCSS_LOADNSR;		seg->res->flags &= ~IORESOURCE_READONLY;	} else {		dcss_command = DCSS_LOADNOLY;		if (seg->vm_segtype == SEG_TYPE_SR ||		    seg->vm_segtype == SEG_TYPE_ER)			seg->res->flags |= IORESOURCE_READONLY;	}	if (request_resource(&iomem_resource, seg->res)) {		PRINT_WARN("segment_modify_shared: could not reload segment %s"			   " - overlapping resources\n", name);		rc = -EBUSY;		kfree(seg->res);		goto out_del;	}	dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy);	diag_cc = dcss_diag(dcss_command, seg->dcss_name,			&seg->start_addr, &seg->end);	if (diag_cc > 1) {		PRINT_WARN ("segment_modify_shared: could not reload segment %s"				" - diag returned error (%ld)\n",name,seg->end);		rc = dcss_diag_translate_rc (seg->end);		goto out_del;	}	seg->do_nonshared = do_nonshared;	rc = 0;	goto out_unlock; out_del:	remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1);	list_del(&seg->list);	dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy);	kfree(seg); out_unlock:	mutex_unlock(&dcss_lock);	return rc;}/* * Decrease the use count of a DCSS segment and remove * it from the address space if nobody is using it * any longer. */voidsegment_unload(char *name){	unsigned long dummy;	struct dcss_segment *seg;	if (!MACHINE_IS_VM)		return;	mutex_lock(&dcss_lock);	seg = segment_by_name (name);	if (seg == NULL) {		PRINT_ERR ("could not find segment %s in segment_unload, "				"please report to linux390@de.ibm.com\n",name);		goto out_unlock;	}	if (atomic_dec_return(&seg->ref_count) != 0)		goto out_unlock;	release_resource(seg->res);	kfree(seg->res);	remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1);	list_del(&seg->list);	dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy);	kfree(seg);out_unlock:	mutex_unlock(&dcss_lock);}/* * save segment content permanently */voidsegment_save(char *name){	struct dcss_segment *seg;	int startpfn = 0;	int endpfn = 0;	char cmd1[160];	char cmd2[80];	int i, response;	if (!MACHINE_IS_VM)		return;	mutex_lock(&dcss_lock);	seg = segment_by_name (name);	if (seg == NULL) {		PRINT_ERR("could not find segment %s in segment_save, please "			  "report to linux390@de.ibm.com\n", name);		goto out;	}	startpfn = seg->start_addr >> PAGE_SHIFT;	endpfn = (seg->end) >> PAGE_SHIFT;	sprintf(cmd1, "DEFSEG %s", name);	for (i=0; i<seg->segcnt; i++) {		sprintf(cmd1+strlen(cmd1), " %X-%X %s",			seg->range[i].start >> PAGE_SHIFT,			seg->range[i].end >> PAGE_SHIFT,			segtype_string[seg->range[i].start & 0xff]);	}	sprintf(cmd2, "SAVESEG %s", name);	response = 0;	cpcmd(cmd1, NULL, 0, &response);	if (response) {		PRINT_ERR("segment_save: DEFSEG failed with response code %i\n",			  response);		goto out;	}	cpcmd(cmd2, NULL, 0, &response);	if (response) {		PRINT_ERR("segment_save: SAVESEG failed with response code %i\n",			  response);		goto out;	}out:	mutex_unlock(&dcss_lock);}EXPORT_SYMBOL(segment_load);EXPORT_SYMBOL(segment_unload);EXPORT_SYMBOL(segment_save);EXPORT_SYMBOL(segment_type);EXPORT_SYMBOL(segment_modify_shared);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -