kitl_cfg.h
来自「该BSP是基于PXA270+WINCE的BSP」· C头文件 代码 · 共 72 行
H
72 行
//
// Copyright (c) Microsoft Corporation. All rights reserved.
//
//
// Use of this source code is subject to the terms of the Microsoft end-user
// license agreement (EULA) under which you licensed this SOFTWARE PRODUCT.
// If you did not accept the terms of the EULA, you are not authorized to use
// this source code. For a copy of the EULA, please see the LICENSE.RTF on your
// install media.
//
#ifndef __KITL_CFG_H
#define __KITL_CFG_H
//------------------------------------------------------------------------------
OAL_KITL_ETH_DRIVER g_kitlEthSMSC91C111 = OAL_ETHDRV_LAN91C;
OAL_KITL_ETH_DRIVER g_kitlEthNE2000 = OAL_ETHDRV_NE2000;
#ifdef BSP_RNDIS_USB_KITL
VOID PXA27X_RndisPowerOff();
VOID PXA27X_RndisPowerOn();
#define OAL_ETHDRV_RNDIS_PXA27X { \
(OAL_KITLETH_INIT)HostMiniInit, \
NULL, \
NULL, \
(OAL_KITLETH_SEND_FRAME)RndisEDbgSendFrame, \
RndisEDbgGetFrame, \
RndisEnableInts, \
RndisDisableInts, \
PXA27X_RndisPowerOff, \
PXA27X_RndisPowerOn, \
(OAL_KITLETH_CURRENT_PACKET_FILTER)RndisCurrentPacketFilter, \
(OAL_KITLETH_MULTICAST_LIST)RndisMulticastList \
}
OAL_KITL_ETH_DRIVER g_kitlEthUsbRndis = OAL_ETHDRV_RNDIS_PXA27X;
#endif
OAL_KITL_DEVICE g_kitlDevices[] = {
{
//------------------
// L"SMSC91C111", Internal, (MAINSTONEII_BASE_REG_PA_SMSC_ETHERNET + 0x300), 0, OAL_KITL_TYPE_ETH,
L"SMSC91C111", Internal, (MAINSTONEII_BASE_REG_PA_SMSC_ETHERNET ), 0, OAL_KITL_TYPE_ETH,
//------------------
&g_kitlEthSMSC91C111
},
{
L"NE2000_PCCARD", Internal, (BULVERDE_BASE_REG_PA_PCMCIA_S0_IO + 0x300), 0, OAL_KITL_TYPE_ETH,
&g_kitlEthNE2000
},
{
L"NE2000_PCCARD", Internal, (BULVERDE_BASE_REG_PA_PCMCIA_S1_IO + 0x300), 0, OAL_KITL_TYPE_ETH,
&g_kitlEthNE2000
},
#ifdef BSP_RNDIS_USB_KITL
{
L"USB_RNDIS", Internal, BULVERDE_BASE_REG_PA_UDC, 0, OAL_KITL_TYPE_ETH,
&g_kitlEthUsbRndis
},
#endif
{
NULL, 0, 0, 0, 0, NULL
}
};
//------------------------------------------------------------------------------
#endif
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?