hard-4.htm

这里面是各种总线的定义

1501 adapter test failure<br>
1510 8255 port b failure<br>
1511 8255 port a failure<br>
1512 8255 port c failure<br>
1513 8253 timer 1 did not reach terminal count<br>
1514 8253 timer 1 stuck on<br>
1515 8253 timer 0 did not reach terminal count<br>
1516 8253 timer 0 stuck on<br>
1517 8253 timer 2 did not reach terminal count<br>
1518 8253 timer 2 stuck on<br>
1519 8273 port b error<br>
1520 8273 port a error<br>
1521 8273 command/read time-out<br>
1522 interrupt level 4 failure<br>
1523 ring Indicate stuck on<br>
1524 receive clock stuck on<br>
1525 transmit clock stuck on<br>
1526 test indicate stuck on<br>
1527 ring indicate not on<br>
1528 receive clock not on<br>
1529 transmit clock not on<br>
1530 test indicate not on<br>
1531 DSR not on<br>
1532 CD not on<br>
1533 CTS not on<br>
1534 DSR stuck on<br>
1535 CD stuck on<br>
1536 CTS stuck on<br>
1537 level 3 interrupt failure<br>
1538 receive interrupt results error<br>
1539 wrap data compare error<br>
1540 DMA channel 1 error<br>
1541 DMA channel 1 error<br>
1542 error in 8273 error checking or status reporting<br>
1547 stray interrupt level 4<br>
1548 stray interrupt level 3<br>
1549 interrupt presentation sequence time-out<br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">16xx Display 
Emulation Errors（显示模拟，用于CGA）</span></font><font color="#008080"><br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">17xx Fixed 
disk Errors:（硬盘）</span></font><font color="#008080"><br>
<br>
1701 post error<br>
1702 adapter error<br>
1703 drive error (seek)<br>
1704 adapter or drive error<br>
1705 no record found<br>
1706 write fault error<br>
1707 track 0 error<br>
1708 head select error<br>
1709 defective error check<br>
1710 read buffer overrun<br>
1711 bad address mark<br>
1712 undetermined error<br>
1713 data compare error<br>
1714 drive not ready<br>
1780 disk 0 failure<br>
1781 disk 1 failure<br>
1782 disk controller failure<br>
1790 fixed disk 0 error<br>
1791 fixed disk 1 error<br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">18xx I/O 
Expansion Unit Errors:（I/O端口扩展）<br>
</span></font><font color="#008080"><br>
1801 I/O expansion unit POST error<br>
1810 enable/disable failure<br>
1811 extender card wrap test failed (disabled)<br>
1812 high order address lines failure (disabled)<br>
1813 wait state failure (disabled)<br>
1814 enable/disable could not be set on<br>
1815 wait state failure (enabled)<br>
1816 extender card wrap test failed (enabled)<br>
1817 high order address lines failure (enabled)<br>
1818 disable not functioning<br>
1819 wait request switch not set correctly<br>
1820 receiver card wrap test failure<br>
1821 receiver high order address lines failure<br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">19xx 3270 PC 
Attachment Card Errors</span></font><font color="#008080"><br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">20xx Bisync 
Communications Adapter Errors:</span></font><font color="#008080"><br>
<br>
2010 8255 port a failure<br>
2011 8255 port b failure<br>
2012 8255 port c failure<br>
2013 8253 timer 1 did not reach terminal count<br>
2014 8253 timer 1 stuck on<br>
2016 8253 timer 2 didn't reach terminal count or timer 2 stuck on<br>
2017 8251 DSR failed to come on<br>
2018 8251 CTS not sensed<br>
2019 8251 DSR stuck on<br>
2020 8251 CTS stuck on<br>
2021 8251 hardware reset failed<br>
2022 8251 software reset failed<br>
2023 8251 software error reset failed<br>
2024 8251 transmit ready did not come on<br>
2025 8251 receive ready did not come on<br>
2026 8251 could not force &quot;overrun&quot; error status<br>
2027 interrupt failure, no timer interrupt<br>
2028 transmit interrupt, card or planar failure<br>
2029 transmit interrupt, card failure<br>
2030 receive interrupt, card or planar failure<br>
2031 receive interrupt, card failure<br>
2033 ring indicate stuck on<br>
2034 receive clock stuck on<br>
2035 transmit clock stuck on<br>
2036 test indicate stuck on<br>
2037 ring indicate stuck on<br>
2038 receive clock not on<br>
2039 transmit clock not on<br>
2040 test indicate not on<br>
2041 DSR not on<br>
2042 CD not on<br>
2043 CTS not on<br>
2044 DSR stuck on<br>
2045 CD stuck on<br>
2046 CTS stuck on<br>
2047 unexpected transmit interrupt<br>
2048 unexpected receive interrupt<br>
2049 transmit data did not equal receive data<br>
2050 8251 detected overrun error<br>
2051 lost DSR during data wrap<br>
2052 receive time-out during data wrap<br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">21xx 
Alternate Bisync Communications Adapter Errors:<br>
</span></font><font color="#008080"><br>
2100-2152 same as 2000-2052<br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">22xx Cluster 
Adapter Errors</span></font><font color="#008080"><br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">24xx EGA 
Errors:（EGA显示卡）<br>
</span></font><font color="#008080"><br>
2401 adapter test failure<br>
2408 user-indicated display attributes<br>
2416 user-indicated character set<br>
2424 user-indicated 80x25 mode<br>
2432 user-indicated 40x25 mode<br>
2440 user-indicated 320x200 graphics mode<br>
2448 user-indicated 640x200 graphics mode<br>
2456 light pen test<br>
2464 user-indicated screen paging test<br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">25xx EGA 
Display Errors</span></font><font color="#008080"><br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">28xx 3278/79 
Emulator Adapter (PC,XT) Errors</span></font><font color="#008080"><br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">29xx Color 
Matrix Printer Errors</span></font><font color="#008080"><br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">30xx Local 
Area Network Adapter Errors</span></font><font color="#008080"><br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">31xx 
Alternate Local Area Network Adapter Errors</span></font><font color="#008080"><br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">33xx Compact 
Printer Errors</span></font><font color="#008080"><br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">36xx IEEE 
488 Adapter Errors</span></font><font color="#008080"><br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">37xx 
Reserved for Future Use Errors</span></font></p>

<p><font color="#000080"><span style="background-color: rgb(200,200,255)">38xx Data 
Acquisition Adapter Errors</span></font></p>

<p><font color="#000080"><span style="background-color: rgb(200,200,255)">39xx PGA Display 
and/or Adapter Errors </span></font></p>

<p><font color="#000080"><span style="background-color: rgb(200,200,255)">48xx Internal 
Modem Errors</span></font></p>

<p><font color="#000080"><span style="background-color: rgb(200,200,255)">49xx Alternate 
Internal Modem Errors</span></font></p>

<p><font color="#000080"><span style="background-color: rgb(200,200,255)">71xx Voice 
Communications Adapter Errors</span></font></p>

<p><font color="#000080"><span style="background-color: rgb(200,200,255)">73xx 3.5 Inch 
Diskette Drive Errors:（软驱）<br>
</span></font><font color="#008080"><br>
7301 diskette drive/adapter test failure<br>
7306 diskette change line error<br>
7307 write-protected diskette<br>
7308 bad command<br>
7310 track zero error<br>
7311 timeout<br>
7312 bad NEC7313 bad DMA<br>
7314 DMA boundary error<br>
7315 bad index<br>
7316 speed error<br>
7321 bad seek<br>
7322 bad CRC<br>
7323 record not found<br>
7324 bad address mark<br>
7325 bad NEC seek<br>
<br>
</font><font color="#000080"><span style="background-color: rgb(200,200,255)">86xx PS1 
Mouse Errors</span></font><font color="#008080"><br>
<br>
- all error codes for the diagnostic and advanced diagnostic<br>
packages for the PC, XT and AT are represented with the device<br>
number followed by two digits other than 00. The device number<br>
plus 00 represents successful completion of the test.<br>
</font></p>
</body>
</html>