sdh_clk.rpt

该程序是同步帧检测

         #  count20 &  count22 &  count24 &  count27 &  count28 & !_LC061 & 
              _X009 &  _X010 &  _X011 &  _X012 &  _X013 &  _X014 &  _X015
         # !count20 & !count21 & !count23 & !count25 & !count26 & !_LC060 & 
              _X009 &  _X010 &  _X011 &  _X012 &  _X013 &  _X014 &  _X015
         #  count23 &  count24 &  count27 &  count28 & !_LC061 &  _X009 & 
              _X010 &  _X011 &  _X012 &  _X013 &  _X014 &  _X015;
  _X009  = EXP(!count22 & !count23 & !count25 & !count26 & !_LC060);
  _X010  = EXP(!count27 & !_LC060);
  _X011  = EXP( count26 &  count27 &  count28 & !_LC061);
  _X012  = EXP( count25 &  count27 &  count28 & !_LC061);
  _X013  = EXP(!count24 & !count25 & !count26 & !_LC060);
  _X014  = EXP(!_LC060 & !_LC061);
  _X015  = EXP(!count28 & !_LC060);
  _EQ015 =  _X009 &  _X010 &  _X011 &  _X012 &  _X013 &  _X014 &  _X015;
  _X009  = EXP(!count22 & !count23 & !count25 & !count26 & !_LC060);
  _X010  = EXP(!count27 & !_LC060);
  _X011  = EXP( count26 &  count27 &  count28 & !_LC061);
  _X012  = EXP( count25 &  count27 &  count28 & !_LC061);
  _X013  = EXP(!count24 & !count25 & !count26 & !_LC060);
  _X014  = EXP(!_LC060 & !_LC061);
  _X015  = EXP(!count28 & !_LC060);

-- Node name is ':12' = 'count28' 
-- Equation name is 'count28', location is LC040, type is buried.
count28  = DFFE( _EQ016 $  _EQ017, GLOBAL( clk_19m), GLOBAL( reset),  VCC,  VCC);
  _EQ016 =  count21 &  count22 &  count24 &  count27 &  count28 &  _LC064 & 
              _X016 &  _X017 &  _X018 &  _X019 &  _X020
         #  count20 &  count22 &  count24 &  count27 &  count28 &  _LC064 & 
              _X016 &  _X017 &  _X018 &  _X019 &  _X020;
  _X016  = EXP( count23 &  count24 &  count27 &  count28 &  _LC064);
  _X017  = EXP( count26 &  count27 &  count28 &  _LC064);
  _X018  = EXP( count25 &  count27 &  count28 &  _LC064);
  _X019  = EXP(!count28 & !_LC059);
  _X020  = EXP( count22 &  count23 &  count24 &  count25 &  count26 &  count27 & 
              count28 &  _LC064);
  _EQ017 =  _X016 &  _X017 &  _X018 &  _X019 &  _X020;
  _X016  = EXP( count23 &  count24 &  count27 &  count28 &  _LC064);
  _X017  = EXP( count26 &  count27 &  count28 &  _LC064);
  _X018  = EXP( count25 &  count27 &  count28 &  _LC064);
  _X019  = EXP(!count28 & !_LC059);
  _X020  = EXP( count22 &  count23 &  count24 &  count25 &  count26 &  count27 & 
              count28 &  _LC064);

-- Node name is ':24' = 'count30' 
-- Equation name is 'count30', location is LC025, type is buried.
count30  = TFFE( VCC, GLOBAL( clk_10m), GLOBAL( reset),  VCC,  VCC);

-- Node name is ':23' = 'count31' 
-- Equation name is 'count31', location is LC017, type is buried.
count31  = TFFE( count30, GLOBAL( clk_10m), GLOBAL( reset),  VCC,  VCC);

-- Node name is ':22' = 'count32' 
-- Equation name is 'count32', location is LC044, type is buried.
count32  = TFFE( _EQ018, GLOBAL( clk_10m), GLOBAL( reset),  VCC,  VCC);
  _EQ018 =  count30 &  count31;

-- Node name is 'ena_64k' = ':4' 
-- Equation name is 'ena_64k', type is output 
 ena_64k = DFFE( _EQ019 $  GND, GLOBAL( clk_19m), GLOBAL( reset),  VCC,  VCC);
  _EQ019 = !count10 & !count11 &  f2;

-- Node name is 'ena_192k' = ':6' 
-- Equation name is 'ena_192k', type is output 
 ena_192k = DFFE( f2 $  GND, GLOBAL( clk_19m), GLOBAL( reset),  VCC,  VCC);

-- Node name is 'ena_1250k' = ':8' 
-- Equation name is 'ena_1250k', type is output 
 ena_1250k = DFFE( _EQ020 $  GND, GLOBAL( clk_10m), GLOBAL( reset),  VCC,  VCC);
  _EQ020 = !count30 & !count31 & !count32;

-- Node name is ':21' = 'f2' 
-- Equation name is 'f2', location is LC054, type is buried.
f2       = DFFE( _EQ021 $  count28, GLOBAL( clk_19m), GLOBAL( reset),  VCC,  VCC);
  _EQ021 = !count20 & !count21 & !count23 & !count25 & !count26 &  count28
         # !count22 & !count23 & !count25 & !count26 &  count28
         # !count24 & !count25 & !count26 &  count28
         # !count27 &  count28;

-- Node name is '|LPM_ADD_SUB:195|addcore:adder|addcore:adder0|cout_node' from file "addcore.tdf" line 165, column 5
-- Equation name is '_LC064', type is buried 
_LC064   = LCELL( _EQ022 $  count27);
  _EQ022 = !count20 & !count21 & !count22 & !count23 & !count25 & !count26 & 
              count27
         # !count24 & !count25 & !count26 &  count27;

-- Node name is '|LPM_ADD_SUB:195|addcore:adder|addcore:adder0|result_node3' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC038', type is buried 
_LC038   = LCELL( count23 $  _EQ023);
  _EQ023 = !count20 & !count21 & !count22;

-- Node name is '|LPM_ADD_SUB:195|addcore:adder|addcore:adder0|result_node4' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC056', type is buried 
_LC056   = LCELL(!count24 $  _EQ024);
  _EQ024 = !count20 & !count21 & !count22 & !count23;

-- Node name is '|LPM_ADD_SUB:195|addcore:adder|addcore:adder0|result_node5' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC055', type is buried 
_LC055   = LCELL( _EQ025 $  count25);
  _EQ025 = !count20 & !count21 & !count22 & !count23
         # !count24;

-- Node name is '|LPM_ADD_SUB:195|addcore:adder|addcore:adder0|result_node6' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC049', type is buried 
_LC049   = LCELL( _EQ026 $  count26);
  _EQ026 = !count20 & !count21 & !count22 & !count23 & !count25
         # !count24 & !count25;

-- Node name is '|LPM_ADD_SUB:195|addcore:adder|addcore:adder0|result_node7' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC061', type is buried 
_LC061   = LCELL( _EQ027 $ !count27);
  _EQ027 = !count20 & !count21 & !count22 & !count23 & !count25 & !count26
         # !count24 & !count25 & !count26;

-- Node name is '|LPM_ADD_SUB:243|addcore:adder|addcore:adder0|cout_node' from file "addcore.tdf" line 165, column 5
-- Equation name is '_LC059', type is buried 
_LC059   = LCELL( _EQ028 $  GND);
  _EQ028 =  count22 &  count23 &  count24 &  count25 &  count26 &  count27;

-- Node name is '|LPM_ADD_SUB:243|addcore:adder|addcore:adder0|result_node3' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC042', type is buried 
_LC042   = LCELL(!count23 $ !count22);

-- Node name is '|LPM_ADD_SUB:243|addcore:adder|addcore:adder0|result_node4' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC041', type is buried 
_LC041   = LCELL( count24 $  _EQ029);
  _EQ029 =  count22 &  count23;

-- Node name is '|LPM_ADD_SUB:243|addcore:adder|addcore:adder0|result_node5' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC058', type is buried 
_LC058   = LCELL( count25 $  _EQ030);
  _EQ030 =  count22 &  count23 &  count24;

-- Node name is '|LPM_ADD_SUB:243|addcore:adder|addcore:adder0|result_node6' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC045', type is buried 
_LC045   = LCELL( count26 $  _EQ031);
  _EQ031 =  count22 &  count23 &  count24 &  count25;

-- Node name is '|LPM_ADD_SUB:243|addcore:adder|addcore:adder0|result_node7' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC060', type is buried 
_LC060   = LCELL( count27 $  _EQ032);
  _EQ032 =  count22 &  count23 &  count24 &  count25 &  count26;

-- Node name is '~285~1' 
-- Equation name is '~285~1', location is LC062, type is buried.
-- synthesized logic cell 
_LC062   = LCELL( _EQ033 $  GND);
  _EQ033 = !count22 & !count23 & !count25 & !count26 & !_LC045
         #  count26 &  count27 &  count28 & !_LC049
         #  count25 &  count27 &  count28 & !_LC049
         # !count24 & !count25 & !count26 & !_LC045
         # !_LC045 & !_LC049;

-- Node name is '~291~1' 
-- Equation name is '~291~1', location is LC063, type is buried.
-- synthesized logic cell 
_LC063   = LCELL( _EQ034 $  GND);
  _EQ034 = !count22 & !count23 & !count25 & !count26 & !_LC058
         #  count26 &  count27 &  count28 & !_LC055
         #  count25 &  count27 &  count28 & !_LC055
         # !count24 & !count25 & !count26 & !_LC058
         # !_LC055 & !_LC058;

-- Node name is '~297~1' 
-- Equation name is '~297~1', location is LC043, type is buried.
-- synthesized logic cell 
_LC043   = LCELL( _EQ035 $  GND);
  _EQ035 = !count22 & !count23 & !count25 & !count26 & !_LC041
         #  count26 &  count27 &  count28 & !_LC056
         #  count25 &  count27 &  count28 & !_LC056
         # !count24 & !count25 & !count26 & !_LC041
         # !_LC041 & !_LC056;

-- Node name is '~303~1' 
-- Equation name is '~303~1', location is LC047, type is buried.
-- synthesized logic cell 
_LC047   = LCELL( _EQ036 $  GND);
  _EQ036 = !count22 & !count23 & !count25 & !count26 & !_LC042
         #  count26 &  count27 &  count28 & !_LC038
         #  count25 &  count27 &  count28 & !_LC038
         # !count24 & !count25 & !count26 & !_LC042
         # !_LC038 & !_LC042;



--     Shareable expanders that are duplicated in multiple LABs:
--     (none)




Project Information                                        e:\fram\sdh_clk.rpt

** COMPILATION SETTINGS & TIMES **

Processing Menu Commands
------------------------

Design Doctor                             = off

Logic Synthesis:

   Synthesis Type Used                    = Standard

   Default Synthesis Style                = NORMAL

      Logic option settings in 'NORMAL' style for 'MAX7000S' family

      DECOMPOSE_GATES                     = on
      DUPLICATE_LOGIC_EXTRACTION          = on
      MINIMIZATION                        = full
      MULTI_LEVEL_FACTORING               = on
      NOT_GATE_PUSH_BACK                  = on
      PARALLEL_EXPANDERS                  = off
      REDUCE_LOGIC                        = on
      REFACTORIZATION                     = on
      REGISTER_OPTIMIZATION               = on
      RESYNTHESIZE_NETWORK                = on
      SLOW_SLEW_RATE                      = off
      SOFT_BUFFER_INSERTION               = on
      SUBFACTOR_EXTRACTION                = on
      TURBO_BIT                           = on
      XOR_SYNTHESIS                       = on
      IGNORE_SOFT_BUFFERS                 = off
      USE_LPM_FOR_AHDL_OPERATORS          = off

   Other logic synthesis settings:

      Automatic Global Clock              = on
      Automatic Global Clear              = on
      Automatic Global Preset             = on
      Automatic Global Output Enable      = on
      Automatic Fast I/O                  = off
      Automatic Register Packing          = off
      Automatic Open-Drain Pins           = on
      Automatic Implement in EAB          = off
      One-Hot State Machine Encoding      = off
      Optimize                            = 5

Default Timing Specifications: None

Cut All Bidir Feedback Timing Paths       = on
Cut All Clear & Preset Timing Paths       = on

Ignore Timing Assignments                 = off

Functional SNF Extractor                  = off

Linked SNF Extractor                      = off
Timing SNF Extractor                      = on
Optimize Timing SNF                       = off
Generate AHDL TDO File                    = off
Fitter Settings                           = NORMAL
Smart Recompile                           = off
Total Recompile                           = off

Interfaces Menu Commands
------------------------

EDIF Netlist Writer                       = off
Verilog Netlist Writer                    = off
VHDL Netlist Writer                       = off

Compilation Times
-----------------

   Compiler Netlist Extractor             00:00:01
   Database Builder                       00:00:00
   Logic Synthesizer                      00:00:00
   Partitioner                            00:00:00
   Fitter                                 00:00:00
   Timing SNF Extractor                   00:00:00
   Assembler                              00:00:00
   --------------------------             --------
   Total Time                             00:00:01


Memory Allocated
-----------------

Peak memory allocated during compilation  = 4,111K