edstruct.c

clips源代码

 * window descriptions. Ask the redisplay to do all the hard work. Bound to
 * "C-X C-Z".
 */
globle int shrinkwind(
  void *theEnv,
  int f,
  int n)
{
        register WINDOW *adjwp;
        register LINE   *lp;
        register int    i;

        if (n < 0)
                return (enlargewind(theEnv,f, -n));
        if (wheadp->w_wndp == NULL) {
                mlwrite("Only one window");
                return (FALSE);
        }
        if ((adjwp=curwp->w_wndp) == NULL) {
                adjwp = wheadp;
                while (adjwp->w_wndp != curwp)
                        adjwp = adjwp->w_wndp;
        }
        if (curwp->w_ntrows <= (char) n) {
                mlwrite("Impossible change");
                return (FALSE);
        }
        if (curwp->w_wndp == adjwp) {           /* Grow below.          */
                lp = adjwp->w_linep;
                for (i=0; i<n && lback(lp)!=adjwp->w_bufp->b_linep; ++i)
                        lp = lback(lp);
                adjwp->w_linep  = lp;
                adjwp->w_toprow -= (char) n;
        } else {                                /* Grow above.          */
                lp = curwp->w_linep;
                for (i=0; i<n && lp!=curbp->b_linep; ++i)
                        lp = lforw(lp);
                curwp->w_linep  = lp;
                curwp->w_toprow += (char) n;
        }
        curwp->w_ntrows -= (char) n;
        adjwp->w_ntrows += (char) n;
        curwp->w_flag |= WFMODE|WFHARD;
        adjwp->w_flag |= WFMODE|WFHARD;
        return (TRUE);
}

/*
 * Pick a window for a pop-up. Split the screen if there is only one window.
 * Pick the uppermost window that isn't the current window. An LRU algorithm
 * might be better. Return a pointer, or NULL on error.
 */
globle WINDOW  *wpopup(
  void *theEnv)
{
        register WINDOW *wp;

        if (wheadp->w_wndp == NULL              /* Only 1 window        */
        && splitwind(theEnv,FALSE, 0) == FALSE)        /* and it won't split   */
                return (NULL);
        wp = wheadp;                            /* Find window to use   */
        while (wp!=NULL && wp==curwp)
                wp = wp->w_wndp;
        return (wp);
}


/* ==========================================================================
 *                        DISPLAY MANAGEMENT FUNCTIONS
 * ==========================================================================
 */

/*
 * The functions in this section handle redisplay. There are two halves, the
 * ones that update the virtual display screen, and the ones that make the
 * physical display screen the same as the virtual display screen. These
 * functions use hints that are left in the windows by the commands.
 *
 * REVISION HISTORY:
 *
 * ?    Steve Wilhite, 1-Dec-85
 *      - massive cleanup on code.
 */

#define WFDEBUG 0                       /* Window flag debug. */

/*
 * Initialize the data structures used by the display code. The edge vectors
 * used to access the screens are set up. The operating system's terminal I/O
 * channel is set up. All the other things get initialized at compile time.
 * The original window has "WFCHG" set, so that it will get completely
 * redrawn on the first call to "update".
 */
globle void vtinit(
  void *theEnv)
{
    register int i;

    register VIDEO *vp;

    (*term.t_open)();
    vscreen = (VIDEO **) genalloc(theEnv,(unsigned) term.t_nrow*sizeof(VIDEO *));

    if (vscreen == NULL)
        exit(1);

    pscreen = (VIDEO **) genalloc(theEnv,(unsigned) term.t_nrow*sizeof(VIDEO *));

    if (pscreen == NULL)
        exit(1);

    for (i = 0; i < term.t_nrow; ++i)
        {
        vp = (VIDEO *) genalloc(theEnv,(unsigned) sizeof(VIDEO)+term.t_ncol);

        if (vp == NULL)
            exit(1);

        vscreen[i] = vp;
        vp = (VIDEO *) genalloc(theEnv,(unsigned) sizeof(VIDEO)+term.t_ncol);

        if (vp == NULL)
            exit(1);

        pscreen[i] = vp;
        }
}

/*
 * Clean up the virtual terminal system, in anticipation for a return to the
 * operating system. Move down to the last line and clear it out (the next
 * system prompt will be written in the line). Shut down the channel to the
 * terminal.
 */
globle void vttidy()
{
    movecursor(term.t_nrow, 0);
    (*term.t_eeol)();
    (*term.t_close)();
}

/*
 * Set the virtual cursor to the specified row and column on the virtual
 * screen. There is no checking for nonsense values; this might be a good
 * idea during the early stages.
 */
globle void vtmove(
int row,
int col)
{
    vtrow = row;
    vtcol = col;
}

/*
 * Write a character to the virtual screen. The virtual row and column are
 * updated. If the line is too long put a "$" in the last column. This routine
 * only puts printing characters into the virtual terminal buffers. Only
 * column overflow is checked.
 */
globle void vtputc(
    int c)
{
    register VIDEO      *vp;

    vp = vscreen[vtrow];

    if (vtcol >= term.t_ncol)
        vp->v_text[term.t_ncol - 1] = '$';
    else if (c == '\t')
        {
        do
            {
            vtputc(' ');
            }
        while ((vtcol&0x07) != 0);
        }
    else if (c < 0x20 || c == 0x7F)
        {
        vtputc('^');
        vtputc(c ^ 0x40);
        }
    else
        vp->v_text[vtcol++] = (char) c;
}

/*
 * Erase from the end of the software cursor to the end of the line on which
 * the software cursor is located.
 */
globle void vteeol()
{
    register VIDEO      *vp;

    vp = vscreen[vtrow];
    while (vtcol < term.t_ncol)
        vp->v_text[vtcol++] = ' ';
}

/*
 * Make sure that the display is right. This is a three part process. First,
 * scan through all of the windows looking for dirty ones. Check the framing,
 * and refresh the screen. Second, make sure that "currow" and "curcol" are
 * correct for the current window. Third, make the virtual and physical
 * screens the same.
 */
globle void update()
{
    register LINE *lp;
    register WINDOW *wp;
    register VIDEO *vp1;
    register VIDEO *vp2;
    register int i;
    register int j;
    register int c;

    wp = wheadp;

    while (wp != NULL)
        {
        /* Look at any window with update flags set on. */

        if (wp->w_flag != 0)
            {
            /* If not force reframe, check the framing. */

            if ((wp->w_flag & WFFORCE) == 0)
                {
                lp = wp->w_linep;

                for (i = 0; i < wp->w_ntrows; ++i)
                    {
                    if (lp == wp->w_dotp)
                        goto out;

                    if (lp == wp->w_bufp->b_linep)
                        break;

                    lp = lforw(lp);
                    }
                }

            /* Not acceptable, better compute a new value for the line at the
             * top of the window. Then set the "WFHARD" flag to force full
             * redraw.
             */
            i = wp->w_force;

            if (i > 0)
                {
                --i;

                if (i >= wp->w_ntrows)
                  i = wp->w_ntrows-1;
                }
            else if (i < 0)
                {
                i += wp->w_ntrows;

                if (i < 0)
                    i = 0;
                }
            else
                i = wp->w_ntrows/2;

            lp = wp->w_dotp;

            while (i != 0 && lback(lp) != wp->w_bufp->b_linep)
                {
                --i;
                lp = lback(lp);
                }

            wp->w_linep = lp;
            wp->w_flag |= WFHARD;       /* Force full. */

out:
            /* Try to use reduced update. Mode line update has its own special
             * flag. The fast update is used if the only thing to do is within
             * the line editing.
             */
            lp = wp->w_linep;
            i = wp->w_toprow;

            if ((wp->w_flag & ~WFMODE) == WFEDIT)
                {
                while (lp != wp->w_dotp)
                    {
                    ++i;
                    lp = lforw(lp);
                    }

                vscreen[i]->v_flag |= VFCHG;
                vtmove(i, 0);

                for (j = 0; j < llength(lp); ++j)
                    vtputc(lgetc(lp, j));

                vteeol();
                }
             else if ((wp->w_flag & (WFEDIT | WFHARD)) != 0)
                {
                while (i < wp->w_toprow+wp->w_ntrows)
                    {
                    vscreen[i]->v_flag |= VFCHG;
                    vtmove(i, 0);

                    if (lp != wp->w_bufp->b_linep)
                        {
                        for (j = 0; j < llength(lp); ++j)
                            vtputc(lgetc(lp, j));

                        lp = lforw(lp);
                        }

                    vteeol();
                    ++i;
                    }
                }
#if ~WFDEBUG
            if ((wp->w_flag&WFMODE) != 0)
                modeline(wp);

            wp->w_flag  = 0;
            wp->w_force = 0;
#endif
            }
#if WFDEBUG
        modeline(wp);
        wp->w_flag =  0;
        wp->w_force = 0;
#endif
        wp = wp->w_wndp;
        }

    /* Always recompute the row and column number of the hardware cursor. This
     * is the only update for simple moves.
     */
    lp = curwp->w_linep;
    currow = curwp->w_toprow;

    while (lp != curwp->w_dotp)
        {
        ++currow;
        lp = lforw(lp);
        }

    curcol = 0;
    i = 0;

    while (i < curwp->w_doto)
        {
        c = lgetc(lp, i++);

        if (c == '\t')
            curcol |= 0x07;
        else if (c < 0x20 || c == 0x7F)
            ++curcol;

        ++curcol;
        }
/*sprintf(prompt,"Currow: %d  curcol: %d w_toprow: %d", currow, getccol(FALSE),
curwp->w_toprow);
mlwrite(prompt);*/
    if (curcol >= term.t_ncol)          /* Long line. */
        curcol = term.t_ncol-1;

    /* Special hacking if the screen is garbage. Clear the hardware screen,
     * and update your copy to agree with it. Set all the virtual screen
     * change bits, to force a full update.
     */
    if (sgarbf != FALSE)
        {
        for (i = 0; i < term.t_nrow; ++i)
            {
            vscreen[i]->v_flag |= VFCHG;
            vp1 = pscreen[i];
            for (j = 0; j < term.t_ncol; ++j)
                vp1->v_text[j] = ' ';
            }

        movecursor(0, 0);               /* Erase the screen. */
        (*term.t_eeop)();
        sgarbf = FALSE;                 /* Erase-page clears */
        mpresf = FALSE;                 /* the message area. */
        }

    /* Make sure that the physical and virtual displays agree. Unlike before,
     * the "updateline" code is only called with a line that has been updated
     * for sure.
     */
    for (i = 0; i < term.t_nrow; ++i)
        {
        vp1 = vscreen[i];

        if ((vp1->v_flag&VFCHG) != 0)
            {
            vp1->v_flag &= ~VFCHG;
            vp2 = pscreen[i];
            updateline(i, &vp1->v_text[0], &vp2->v_text[0]);
            }
        }

    /* Finally, update the hardware cursor and flush out buffers. */

    movecursor(currow, curcol);
    (*term.t_flush)();
}

/*
 * Update a single line. This does not know how to use insert or delete
 * character sequences; we are using VT52 functionality. Update the physical
 * row and column variables. It does try an exploit erase to end of line. The
 * RAINBOW version of this routine uses fast video.
 */
globle void updateline(
    int row,
    char vline[],
    char pline[])
{
    register char *cp1;
    register char *cp2;
    register char *cp3;