gtmiismiif.h

MarVel交换机的开发包。用于开发可网管的交换机软年。

#include <Copyright.h>

/********************************************************************************
* gtMiiSmiIf.h
*
* DESCRIPTION:
*       Includes functions prototypes for initializing and accessing the
*       MII / SMI interface.
*       This is the only file to be included from upper layers.
*
* DEPENDENCIES:
*       None.
*
* FILE REVISION NUMBER:
*       $Revision: 2 $
*
*******************************************************************************/

#ifndef __gtMiiSmiIfh
#define __gtMiiSmiIfh


#include <msApi.h>

#ifdef __cplusplus
extern "C" {
#endif

/*******************************************************************************
* miiSmiIfInit
*
* DESCRIPTION:
*       This function initializes the MII / SMI interface.
*
* INPUTS:
*       None.
*
* OUTPUTS:
*       highSmiDevAddr - Indicates whether to use the high device register
*                     addresses when accessing switch's registers (of all kinds)
*                     i.e, the devices registers range is 0x10 to 0x1F, or to
*                     use the low device register addresses (range 0x0 to 0xF).
*                       GT_TRUE     - use high addresses (0x10 to 0x1F).
*                       GT_FALSE    - use low addresses (0x0 to 0xF).
*
* RETURNS:
*       DEVICE_ID       - on success
*       0     - on error
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_U16 miiSmiIfInit
(
    IN  GT_QD_DEV *dev,
    OUT GT_BOOL   * highSmiDevAddr
);

/*******************************************************************************
* miiSmiManualIfInit
*
* DESCRIPTION:
*       This function returns Device ID from the given base address
*
* INPUTS:
*       baseAddr - either 0x0 or 0x10. Indicates whether to use the low device 
*					register address or high device register address.
*					The device register range is from 0x0 to 0xF or from 0x10 
*					to 0x1F for 5 port switchs and from 0x0 to 0x1B for 8 port 
*					switchs.
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       DEVICE_ID       - on success
*       0    - on error
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_U16 miiSmiManualIfInit
(
	IN  GT_QD_DEV   *dev,
	IN  GT_U32		baseAddr
);

/*******************************************************************************
* miiSmiIfReadRegister
*
* DESCRIPTION:
*       This function reads a register throw the SMI / MII interface, to be used
*       by upper layers.
*
* INPUTS:
*       phyAddr     - The PHY address to be read.
*       regAddr     - The register address to read.
*
* OUTPUTS:
*       data        - The register's data.
*
* RETURNS:
*       GT_OK   - on success
*       GT_FAIL - on error
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_STATUS miiSmiIfReadRegister
(
    IN  GT_QD_DEV *dev,
    IN  GT_U8     phyAddr,
    IN  GT_U8     regAddr,
    OUT GT_U16    *data
);


/*******************************************************************************
* miiSmiIfWriteRegister
*
* DESCRIPTION:
*       This function writes to a register throw the SMI / MII interface, to be
*       used by upper layers.
*
* INPUTS:
*       phyAddr     - The PHY address to be read.
*       regAddr     - The register address to read.
*       data        - The data to be written to the register.
*
* OUTPUTS:
*       None.
*
* RETURNS:
*       GT_OK   - on success
*       GT_FAIL - on error
*
* COMMENTS:
*       None.
*
*******************************************************************************/
GT_STATUS miiSmiIfWriteRegister
(
    IN  GT_QD_DEV *dev,
    IN  GT_U8     phyAddr,
    IN  GT_U8     regAddr,
    IN  GT_U16    data
);

#ifdef __cplusplus
}
#endif

#endif /* __gtMiiSmiIfh */