halboot.si

开放源码实时操作系统源码.

#ifndef CYGONCE_HAL_HALBOOT_SI /* -*-asm-*- */
#define CYGONCE_HAL_HALBOOT_SI
// ====================================================================
//
//	<platform>/halboot.si
//
//	HAL bootup platform-oriented code (assembler)
//
// ====================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
// ====================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): 	        hmt
// Contributors:	hmt
// Date:	        1999-02-01
// Purpose:	        Bootup code, platform oriented.
// Description:
//
//####DESCRIPTIONEND####
//
// ====================================================================

// External Platform Initial Setup
//
// This should set up RAM and caches, and calm down any external
// interrupt sources.
//
// It is just plain included in vectors.S
//
// RAM has not yet been touched at all; in fact all you have is a
// register window selected.


	! Empty macro for debugging vectors.S
	.macro led val
        .endm

	! Set memory according to simulator config

	set	0x80000000, %l0		! LEON register base address

        ld      [%l0 + 0x14], %l1       ! chech if we have been initialized
	andcc	%l1, 0x1, %g0
	bne	4f
	nop

	flush				! if we are here, we are running on
	set	0x1000f, %l1		! the simulator....

        st      %l1, [%l0 + 0x14]       ! enable caches

        st      %g0, [%l0 + 0x1c]       ! clear LEON registers
        st      %g0, [%l0 + 0x20]       ! 
        st      %g0, [%l0 + 0x90]       ! 
        st      %g0, [%l0 + 0x94]       ! 
        st      %g0, [%l0 + 0x98]       ! 
        st      %g0, [%l0 + 0x9C]       ! 
        st      %g0, [%l0 + 0xA0]       ! 
        st      %g0, [%l0 + 0xA4]       ! 
        st      %g0, [%l0 + 0xA4]       ! 
        st      %g0, [%l0 + 0x78]       ! 
        st      %g0, [%l0 + 0x88]       ! 

        ld      [%l0 + 0xF8], %g1	! load simulator rom size
	clr	%l2
	subcc	%g1, 0, %g0
	be	3f
	srl	%g1, 13, %g1		! calculate appropriate rom size
1:
	srl	%g1, 1, %g1
	tst	%g1
	bne,a	1b
	inc	%l2
	sll	%l2, 14, %l2
	st	%l2, [%l0 + 0x00]	! set prom size in memcfg1

	set	0, %l2
        ld      [%l0 + 0xF4], %g2	! load simulator ram size
	srl	%g2, 13, %g1		! calculate appropriate ram size
1:
	srl	%g1, 1, %g1
	tst	%g1
	bne,a	1b
	inc	%l2
	sll	%l2, 9, %l2
	or	%l2, 0x20, %l2
	st	%l2, [%l0 + 0x04]	! set ram size in memcfg2
	set	0x40000000, %l2
	add	%g2, %l2, %fp
	sub	%fp, 96*4, %sp
3:
 	st	%g0, [%sp]		!probe for FPU
!	ld	[%sp], %fsr
	set	49, %l1
        st      %l1, [%l0 + 0x64]       ! scaler = 49
        st      %l1, [%l0 + 0x60]       ! scaler = 49

2:

	set	-1, %l1
        st      %l1, [%l0 + 0x44]       ! timer 1 = 0xffffff
	set	7, %l1
        st      %l1, [%l0 + 0x48]       ! start timer 1 
  	st	%l1, [%l0 + 0x78] 	! enable UARTS
  	st	%l1, [%l0 + 0x88]

4:
	! then copy the branch instructions into the vector
	rd	%tbr, %g1
	andn	%g1, 0xfff, %g1		! clear non-address bits
	sethi	%hi(real_vector_instructions), %l0
	or	%l0, %lo(real_vector_instructions), %l0
	ld	[ %l0 ], %l1
	st	%l1, [ %g1 ]		! into the vector
	ld	[ %l0 + 4 ], %l1
	st	%l1, [ %g1 + 4 ]	! into the vector

#endif  /* CYGONCE_HAL_HALBOOT_SI */
/* EOF halboot.si */