hal_diag.h

开放源码实时操作系统源码.

#ifndef CYGONCE_HAL_HAL_DIAG_H
#define CYGONCE_HAL_HAL_DIAG_H

//=============================================================================
//
//      hal_diag.h
//
//      HAL Support for Kernel Diagnostic Routines
//
//=============================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
// Copyright (C) 2002 Gary Thomas
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   nickg
// Contributors:nickg
// Date:        1998-03-02
// Purpose:     HAL Support for Kernel Diagnostic Routines
// Description: Diagnostic routines for use during kernel development.
// Usage:       #include <cyg/hal/hal_diag.h>
//
//####DESCRIPTIONEND####
//
//=============================================================================

#include <pkgconf/hal.h>

#include <cyg/infra/cyg_type.h>

#ifndef CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
// These should not need to be prototyped here, but where????
cyg_uint8
cyg_hal_plf_serial_getc(void);

#if 1
void 
cyg_hal_plf_serial_putc(cyg_uint8 ch);
#else
void 
cyg_hal_plf_serial_putc(void* __ch_data, cyg_uint8 ch);
#endif

#if 1
void
cyg_hal_plf_serial_init(void);
#else
void
cyg_hal_plf_serial_init_channel(void);
#endif
#endif //#ifdef CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT

#define LATER
#ifdef LATER
// See the #else clause at the end
#if defined(CYGSEM_HAL_VIRTUAL_VECTOR_DIAG)

#include <cyg/hal/hal_if.h>

#define HAL_DIAG_INIT() hal_if_diag_init()
#define HAL_DIAG_WRITE_CHAR(_c_) hal_if_diag_write_char(_c_)
#define HAL_DIAG_READ_CHAR(_c_) hal_if_diag_read_char(&_c_)

#else // everything by steam

//-----------------------------------------------------------------------------
// functions implemented in hal_diag.c

externC void hal_diag_init(void);

externC void hal_diag_write_char(char c);

externC void hal_diag_read_char(char *c);

//-----------------------------------------------------------------------------

#define HAL_DIAG_INIT() hal_diag_init()

#define HAL_DIAG_WRITE_CHAR(_c_) hal_diag_write_char(_c_)

#define HAL_DIAG_READ_CHAR(_c_) hal_diag_read_char(&_c_)

#endif // CYGSEM_HAL_VIRTUAL_VECTOR_DIAG

//-----------------------------------------------------------------------------
// end of hal_diag.h
#else
// Need to figure out what to do here at some point, for now, I just copied
// these from the simulator hal_diag.h

//-----------------------------------------------------------------------------
// Register addresses
  
#define PAL_RESET        0x00
#define PAL_CPU_NR       0x04
#define PAL_INT          0x08
#define PAL_NR_CPU       0x0a

#define PAL_READ_FIFO    0x10
#define PAL_READ_STATUS  0x14
#define PAL_WRITE_FIFO   0x18
#define PAL_WRITE_STATUS 0x1a

#define OEA_DEV          0xf0001000

//-----------------------------------------------------------------------------

#define HAL_DIAG_INIT()

// Added by WPD
#ifndef HAL_DISABLE_INTERRUPTS
#define HAL_DISABLE_INTERRUPTS
#define HAL_RESTORE_INTERRUPTS
#endif

#define HAL_DIAG_WRITE_CHAR(_c_)                        \
CYG_MACRO_START                                         \
    volatile unsigned char *tty_buffer =                \
        (unsigned char*)(OEA_DEV + PAL_WRITE_FIFO);     \
    volatile unsigned char *tty_status =                \
        (unsigned char*)(OEA_DEV + PAL_WRITE_STATUS);   \
    unsigned long __state;                              \
                                                        \
    HAL_DISABLE_INTERRUPTS(__state);                    \
    if( _c_ != '\r' )                                   \
    {                                                   \
        while( *tty_status == 0 ) continue;             \
        *tty_buffer = _c_;                              \
    }                                                   \
    HAL_RESTORE_INTERRUPTS(__state);                    \
CYG_MACRO_END

#define HAL_DIAG_READ_CHAR(_c_)                         \
CYG_MACRO_START                                         \
    volatile unsigned char *tty_buffer =                \
        (unsigned char*)(OEA_DEV + PAL_READ_FIFO);      \
    volatile unsigned char *tty_status =                \
        (unsigned char*)(OEA_DEV + PAL_READ_STATUS);    \
    while( *tty_status == 0 ) continue;                 \
    _c_ = *tty_buffer;                                  \
CYG_MACRO_END
#endif // LATER
#endif // CYGONCE_HAL_HAL_DIAG_H