hal_diag.c

开放源码实时操作系统源码.

    {
        va_list ap;

        va_start(ap, __func);

        ret = chan->msec_timeout;
        chan->msec_timeout = va_arg(ap, cyg_uint32);

        va_end(ap);
    }        
    default:
        break;
    }
    CYGARC_HAL_RESTORE_GP();
    return ret;
}

static int
cyg_hal_plf_serial_isr(void *__ch_data, int* __ctrlc, 
                       CYG_ADDRWORD __vector, CYG_ADDRWORD __data)
{
    int res = 0;
    channel_data_t* chan = (channel_data_t*)__ch_data;
    char c;
    cyg_uint8 lsr;
    CYGARC_HAL_SAVE_GP();

    cyg_drv_interrupt_acknowledge(chan->isr_vector);


    *__ctrlc = 0;
    HAL_READ_UINT8(chan->base+CYG_DEV_LSR, lsr);
    if ( (lsr & SIO_LSR_DR) != 0 ) {

        HAL_READ_UINT8(chan->base+CYG_DEV_RBR, c);
        if( cyg_hal_is_break( &c , 1 ) )
            *__ctrlc = 1;

        res = CYG_ISR_HANDLED;
    }

    CYGARC_HAL_RESTORE_GP();
    return res;
}

static channel_data_t aeb_ser_channels[1];

static void
cyg_hal_plf_serial_init(void)
{
    hal_virtual_comm_table_t* comm;
    int cur = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
    channel_data_t* chan;

    chan = &aeb_ser_channels[0];
    chan->base = (cyg_uint8*)CYG_DEV_UART1_BASE;
    chan->isr_vector = CYGNUM_HAL_INTERRUPT_UART1;
    chan->msec_timeout = 1000;

    // Init channel
    cyg_hal_plf_serial_init_channel(chan);

    // Setup procs in the vector table

    // Set channel 0
    CYGACC_CALL_IF_SET_CONSOLE_COMM(0);
    comm = CYGACC_CALL_IF_CONSOLE_PROCS();
    CYGACC_COMM_IF_CH_DATA_SET(*comm, chan);
    CYGACC_COMM_IF_WRITE_SET(*comm, cyg_hal_plf_serial_write);
    CYGACC_COMM_IF_READ_SET(*comm, cyg_hal_plf_serial_read);
    CYGACC_COMM_IF_PUTC_SET(*comm, cyg_hal_plf_serial_putc);
    CYGACC_COMM_IF_GETC_SET(*comm, cyg_hal_plf_serial_getc);
    CYGACC_COMM_IF_CONTROL_SET(*comm, cyg_hal_plf_serial_control);
    CYGACC_COMM_IF_DBG_ISR_SET(*comm, cyg_hal_plf_serial_isr);
    CYGACC_COMM_IF_GETC_TIMEOUT_SET(*comm, cyg_hal_plf_serial_getc_timeout);

    // Restore original console
    CYGACC_CALL_IF_SET_CONSOLE_COMM(cur);
}

void
cyg_hal_plf_comms_init(void)
{
    static int initialized = 0;

    if (initialized)
        return;

    initialized = 1;

    cyg_hal_plf_serial_init();
}

//=============================================================================
// Compatibility with older stubs
//=============================================================================

#ifndef CYGSEM_HAL_VIRTUAL_VECTOR_DIAG

#ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
#include <cyg/hal/drv_api.h>
#include <cyg/hal/hal_stub.h>           // cyg_hal_gdb_interrupt
#endif

// Assumption: all diagnostic output must be GDB packetized unless this is a ROM (i.e.
// totally stand-alone) system.

#if defined(CYG_HAL_STARTUP_ROM) || !defined(CYGDBG_HAL_DIAG_TO_DEBUG_CHAN)
#define HAL_DIAG_USES_HARDWARE
#endif


static channel_data_t aeb_ser_channel = {(cyg_uint8*)CYG_DEV_UART1_BASE, 0, 0};

#ifdef HAL_DIAG_USES_HARDWARE

void hal_diag_init(void)
{
    static int init = 0;
    char *msg = "\n\rAEB-1 eCos\n\r";

    if (init++) return;

    cyg_hal_plf_serial_init_channel(&aeb_ser_channel);

    while (*msg) cyg_hal_plf_serial_putc(&aeb_ser_channel, *msg++);
}

#ifdef DEBUG_DIAG
#if defined(CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS)
#define DIAG_BUFSIZE 32
#else
#define DIAG_BUFSIZE 2048
#endif
static char diag_buffer[DIAG_BUFSIZE];
static int diag_bp = 0;
#endif

void hal_diag_write_char(char c)
{
    hal_diag_init();

    cyg_hal_plf_serial_putc(&aeb_ser_channel, c);

#ifdef DEBUG_DIAG
    diag_buffer[diag_bp++] = c;
    if (diag_bp == DIAG_BUFSIZE) diag_bp = 0;
#endif
}

void hal_diag_read_char(char *c)
{
    *c = cyg_hal_plf_serial_getc(&aeb_ser_channel);
}

#else // HAL_DIAG relies on GDB

// Initialize diag port - assume GDB channel is already set up
void hal_diag_init(void)
{
    if (0) cyg_hal_plf_serial_init_channel(&aeb_ser_channel); // avoid warning
}

// Actually send character down the wire
static void
hal_diag_write_char_serial(char c)
{
    hal_diag_init();

    cyg_hal_plf_serial_putc(&aeb_ser_channel, c);
}

static bool
hal_diag_read_serial(char *c)
{
    long timeout = 1000000000;  // A long time...
    while (!cyg_hal_plf_serial_getc_nonblock(&aeb_ser_channel, c))
        if (0 == --timeout) return false;

    return true;
}

void 
hal_diag_read_char(char *c)
{
    while (!hal_diag_read_serial(c)) ;
}

void 
hal_diag_write_char(char c)
{
    static char line[100];
    static int pos = 0;

    // No need to send CRs
    if( c == '\r' ) return;

    line[pos++] = c;

    if( c == '\n' || pos == sizeof(line) )
    {
        
        CYG_INTERRUPT_STATE old;

        // Disable interrupts. This prevents GDB trying to interrupt us
        // while we are in the middle of sending a packet. The serial
        // receive interrupt will be seen when we re-enable interrupts
        // later.
        
#ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
        CYG_HAL_GDB_ENTER_CRITICAL_IO_REGION(old);
#else
        HAL_DISABLE_INTERRUPTS(old);
#endif

        while(1)
        {
            static char hex[] = "0123456789ABCDEF";
            cyg_uint8 csum = 0;
            int i;
            char c1;
        
            hal_diag_write_char_serial('$');
            hal_diag_write_char_serial('O');
            csum += 'O';
            for( i = 0; i < pos; i++ )
            {
                char ch = line[i];
                char h = hex[(ch>>4)&0xF];
                char l = hex[ch&0xF];
                hal_diag_write_char_serial(h);
                hal_diag_write_char_serial(l);
                csum += h;
                csum += l;
            }
            hal_diag_write_char_serial('#');
            hal_diag_write_char_serial(hex[(csum>>4)&0xF]);
            hal_diag_write_char_serial(hex[csum&0xF]);

            // Wait for the ACK character '+' from GDB here and handle
            // receiving a ^C instead.  This is the reason for this clause
            // being a loop.
            if (!hal_diag_read_serial(&c1))
                continue;   // No response - try sending packet again

            if( c1 == '+' )
                break;              // a good acknowledge

#ifdef CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
            cyg_drv_interrupt_acknowledge(CYGNUM_HAL_INTERRUPT_UART1);
            if( c1 == 3 ) {
                // Ctrl-C: breakpoint.
                cyg_hal_gdb_interrupt (__builtin_return_address(0));
                break;
            }
#endif
            // otherwise, loop round again
        }
        
        pos = 0;

        
        // And re-enable interrupts
#ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
        CYG_HAL_GDB_LEAVE_CRITICAL_IO_REGION(old);
#else
        HAL_RESTORE_INTERRUPTS(old);
#endif
        
    }
}
#endif

#endif // CYGSEM_HAL_VIRTUAL_VECTOR_DIAG


/*---------------------------------------------------------------------------*/
/* End of hal_diag.c */