hal_arm_sa11x0_ipaq.cdl

开放源码实时操作系统源码.

# ====================================================================
#
#      hal_arm_sa11x0_ipaq.cdl
#
#      ARM SA1110/iPAQ platform HAL package configuration data
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      gthomas
# Original data:  gthomas
# Contributors:   [e-mail]
# Date:           2001-02-24
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_HAL_ARM_SA11X0_IPAQ {
    display       "ARM SA1110/IPAQ"
    parent        CYGPKG_HAL_ARM_SA11X0
    hardware
    include_dir   cyg/hal
    define_header hal_arm_sa11x0_ipaq.h
    description   "
        This HAL platform package provides generic
        support for the Compaq iPaq pocket PC."

    compile       ipaq_misc.c lcd_support.c atmel_support.c

    implements    CYGINT_HAL_DEBUG_GDB_STUBS
    implements    CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
    implements    CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
    implements    CYGINT_HAL_PLF_IF_INIT

    implements    CYGHWR_HAL_ARM_SA11X0_UART3

    define_proc {
        puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H   <pkgconf/hal_arm.h>"
        puts $::cdl_system_header "#define CYGBLD_HAL_VARIANT_H  <pkgconf/hal_arm_sa11x0.h>"
        puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H <pkgconf/hal_arm_sa11x0_ipaq.h>"
        puts $::cdl_system_header "#define CYGBLD_HAL_PLF_INTS_H <cyg/hal/hal_platform_ints.h>"
	puts $::cdl_header "#define HAL_PLATFORM_CPU    \"StrongARM 1110\""
        puts $::cdl_header "#define HAL_PLATFORM_BOARD  \"Compaq iPAQ Pocket PC\""
        puts $::cdl_header "#define HAL_PLATFORM_EXTRA  \"\""
        puts $::cdl_header "#define HAL_PLATFORM_MACHINE_TYPE  22"
    }

    cdl_option CYGHWR_HAL_ARM_SA11X0_PROCESSOR_CLOCK_OVERRIDE_DEFAULT {
        display       "Processor clock rate"
        calculated    206400
        flavor        data
        description   "The iPAQ is optimal at this speed.  Caution - selecting
           higher speeds may be unreliable."
    }

    cdl_component CYG_HAL_STARTUP {
        display       "Startup type"
        flavor        data
        default_value {"RAM"}
        legal_values  {"RAM" "ROM" "WinCE" "Compaq"}
	no_define
	define -file system.h CYG_HAL_STARTUP
        description   "
           When targetting the iPaq board it is possible to build
           the system for either RAM bootstrap or ROM bootstrap(s). Select
           'ram' when building programs to load into RAM using eCos GDB
           stubs.  Select 'rom' when building a stand-alone application
           which will be put into ROM, or for the special case of
           building the eCos GDB stubs themselves."

	cdl_option CYGBLD_HAL_STARTUP_ROM_INIT_DRAM {
	    display "Initialize DRAM"
	    active_if     { (CYG_HAL_STARTUP == "ROM") || (CYG_HAL_STARTUP == "Compaq") }
	    default_value { (CYG_HAL_STARTUP == "ROM") }
	    description "
                If the ROM startup code is run from something other than
                the reset state, it should not be necessary (and even
                possibly detrimental) to initialize the DRAM controller.
                Turn this option to force those registers to be set up."
	}
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
        display       "Diagnostic serial port baud rate"
        flavor        data
        legal_values  9600 19200 38400 115200
        default_value 38400
        description   "
            This option selects the baud rate used for the diagnostic port.
            Note: this should match the value chosen for the GDB port if the
            diagnostic and GDB port are the same."
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
        display       "GDB serial port baud rate"
        flavor        data
        legal_values  9600 19200 38400 115200
        default_value 38400
        description   "
            This option selects the baud rate used for the diagnostic port.
            Note: this should match the value chosen for the GDB port if the
            diagnostic and GDB port are the same."
    }

    cdl_option CYGSEM_HAL_PARROT_BOOT {
        display        "Include Flash signature used by WinCE parrot mode"
        flavor         bool
        active_if      { CYG_HAL_STARTUP == "ROM" }
        default_value  1
        description    "
          Enabling this option will add an additional header to the
          executable image making it suitable for booting directly from
          the native (WinCE Parrot) environment.  This mode should be
          the default for ROM based programs, such as RedBoot."
    }

    cdl_option CYGSEM_IPAQ_LCD_COMM {
        display        "Support LCD/touchscreen for comminication channel"
        active_if      CYGPKG_REDBOOT
        flavor         bool
        default_value  1
        description    "
          Enabling this option will use the LCD and touchscreen for a
          communications channel, suitable for RedBoot, etc."
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
        display      "Number of communication channels on the board"
        flavor       data
        calculated   1+CYGSEM_IPAQ_LCD_COMM
    }
 
    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
        display          "Debug serial port"
        flavor data
        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
        default_value    0
        description      "
            The ipaq board has only one serial port. This option
            chooses which port will be used to connect to a host
            running GDB."
     }

     cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
         display      "Default console channel."
         flavor       data
         legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
         calculated   0
     }

     cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
         display          "Diagnostic serial port"
         flavor data
         legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
         default_value    CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
         description      "
            The ipaq board has only one serial port.  This option
            chooses which port will be used for diagnostic output."
     }
 
    cdl_component CYGBLD_GLOBAL_OPTIONS {
        display "Global build options"
        flavor  none
        no_define
        description   "
	    Global build options including control over
	    compiler flags, linker flags and choice of toolchain."