📄 hal_sh_sh77x9_se77x9.cdl
字号:
# ====================================================================
#
# hal_sh_sh77x9_se77x9.cdl
#
# Hitachi SE77X9 board HAL package configuration data
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): jskov
# Original data: jskov
# Contributors:
# Date: 2001-05-25
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_HAL_SH_SH77X9_SE77X9 {
display "Hitachi/SH77X9 SE77X9 board"
parent CYGPKG_HAL_SH
requires ! CYGHWR_HAL_SH_BIGENDIAN
requires CYGHWR_HAL_SH_IRQ_USE_IRQLVL
define_header hal_sh_sh77x9_se77x9.h
include_dir cyg/hal
description "
The SE77X9 HAL package provides the support needed to run
eCos on a Hitachi/SH SE77X9 board."
compile hal_diag.c plf_misc.c ser16c550c.c
implements CYGINT_HAL_DEBUG_GDB_STUBS
implements CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
implements CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
implements CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
define_proc {
puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H <pkgconf/hal_sh.h>"
puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H <pkgconf/hal_sh_sh77x9_se77x9.h>"
puts $::cdl_header "#define CYGNUM_HAL_SH_SH3_SCIF_PORTS 1"
puts $::cdl_header "#define CYGHWR_HAL_VSR_TABLE 0x8c000000"
puts $::cdl_header "#define CYGHWR_HAL_VECTOR_TABLE 0x8c000100"
puts $::cdl_header "#define HAL_PLATFORM_BOARD \"SE77X9\""
puts $::cdl_header "#define HAL_PLATFORM_EXTRA \"\""
}
cdl_option CYGPRI_HAL_SH_SH77X9_VARIANT {
display "Board variant"
flavor data
legal_values {"SE7709RP01" "SE7709SE01" "SE7729SE01"}
default_value {"SE7709SE01"}
no_define
description "
Select the particular board variant used."
}
cdl_option CYGPRI_HAL_SH_SH77X9_SUPERIO {
display "Board variant has SuperIO controller"
default_value 0
compile smsc37c93x.c
description "
Set if the board has a SuperIO controller."
}
cdl_option CYGPRI_HAL_SH_SH77X9_VARIANT_7709R {
display "SE7709RP01 board"
active_if { CYGPRI_HAL_SH_SH77X9_VARIANT == "SE7709RP01" }
calculated 1
requires CYGPKG_HAL_SH_7709R
requires !CYGPKG_HAL_SH_7709S
requires !CYGPKG_HAL_SH_7729
requires !CYGPRI_HAL_SH_SH77X9_SUPERIO
requires { CYGNUM_HAL_SH_OOC_XTAL_DEFAULT == 20000000 }
define_proc {
puts $::cdl_header "#define HAL_PLATFORM_CPU \"SH 7709R\""
puts $::cdl_header "#define CYGNUM_HAL_SH_SE77X9_16550_CLOCK 14745000"
puts $::cdl_header "#define CYGNUM_HAL_SH_SE77X9_16550_BASE 0xb0800000"
puts $::cdl_header "#define CYGNUM_HAL_SH_SE77X9_LEDS_BASE 0xb1800000"
}
description "Settings for the 7709R variant of the board."
}
cdl_option CYGPRI_HAL_SH_SH77X9_VARIANT_7709S {
display "SE7709SE01 board"
active_if { CYGPRI_HAL_SH_SH77X9_VARIANT == "SE7709SE01" }
calculated 1
requires CYGPRI_HAL_SH_SH77X9_SUPERIO
requires !CYGPKG_HAL_SH_7709R
requires CYGPKG_HAL_SH_7709S
requires !CYGPKG_HAL_SH_7729
define_proc {
puts $::cdl_header "#define HAL_PLATFORM_CPU \"SH 7709S\""
puts $::cdl_header "#define CYGNUM_HAL_SH_SE77X9_16550_CLOCK 1846200"
puts $::cdl_header "#define CYGNUM_HAL_SH_SE77X9_16550_BASE 0xb04007f0"
puts $::cdl_header "#define CYGNUM_HAL_SH_SE77X9_LEDS_BASE 0xb0c00000"
puts $::cdl_header "#define CYGNUM_HAL_SH_SE77X9_SDRAM_SETUP"
}
description "Settings for the 7709S variant of the board."
}
cdl_option CYGPRI_HAL_SH_SH77X9_VARIANT_7729 {
display "SE7729SE01 board"
active_if { CYGPRI_HAL_SH_SH77X9_VARIANT == "SE7729SE01" }
calculated 1
requires CYGPRI_HAL_SH_SH77X9_SUPERIO
requires !CYGPKG_HAL_SH_7709R
requires !CYGPKG_HAL_SH_7709S
requires CYGPKG_HAL_SH_7729
define_proc {
puts $::cdl_header "#define HAL_PLATFORM_CPU \"SH 7729\""
puts $::cdl_header "#define CYGNUM_HAL_SH_SE77X9_16550_CLOCK 1846200"
puts $::cdl_header "#define CYGNUM_HAL_SH_SE77X9_16550_BASE 0xb04007f0"
puts $::cdl_header "#define CYGNUM_HAL_SH_SE77X9_LEDS_BASE 0xb0c00000"
puts $::cdl_header "#define CYGNUM_HAL_SH_SE77X9_SDRAM_SETUP"
}
description "Settings for the 7729 variant of the board."
}
cdl_component CYG_HAL_STARTUP {
display "Startup type"
flavor data
legal_values {"RAM" "ROM" "ROMRAM" }
default_value {"RAM"}
no_define
define -file system.h CYG_HAL_STARTUP
description "
When targetting the SE77X9 board it is possible to build
the system for either RAM bootstrap or ROM bootstrap.
RAM bootstrap generally requires that the board
is equipped with ROMs containing a suitable ROM monitor or
equivalent software that allows GDB to download the eCos
application on to the board. The ROM bootstrap typically
requires that the eCos application be blown into EPROMs or
equivalent technology. ROMRAM bootstrap is similar to ROM
bootstrap, but everything is copied to RAM before execution
starts thus improving performance, but at the cost of an
increased RAM footprint."
}
cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
display "Number of communication channels on the board"
flavor data
calculated 2
}
cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
display "Debug serial port"
flavor data
legal_values 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
default_value 0
description "
The SE77X9 board has one serial port. This option
chooses which port will be used to connect to a host
running GDB."
}
cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
display "Default console channel."
flavor data
calculated 0
}
cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
display "Diagnostic serial port"
flavor data
legal_values 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
default_value CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
description "
The SE77X9 board has two serial ports. This option
chooses which port will be used for diagnostic output."
}
cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CHANNELS_DEFAULT_BAUD {
display "Console/GDB serial port baud rate"
flavor data
legal_values 9600 19200 38400 57600 115200
default_value 38400
define CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD
description "
This option controls the default baud rate used for the
Console/GDB connection."
}
cdl_component CYGHWR_HAL_SH_PLF_CLOCK_SETTINGS {
display "SH on-chip platform clock controls"
description "
The various clocks used by the system are derived from
these options."
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -