📄 intr0.c
字号:
//==========================================================================
//
// intr0.c
//
// Interrupt controls test
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): jskov
// Contributors: jskov
// Date: 2001-01-18
//####DESCRIPTIONEND####
//==========================================================================
#include <pkgconf/system.h>
#include <cyg/infra/testcase.h>
#if defined(CYGPKG_KERNEL)
#include <pkgconf/kernel.h>
#if defined(CYGFUN_KERNEL_API_C)
#include <cyg/hal/hal_arch.h> // CYGNUM_HAL_STACK_SIZE_TYPICAL
#include <cyg/kernel/kapi.h>
#include <cyg/hal/hal_intr.h>
// -------------------------------------------------------------------------
#define NTHREADS 1
#define STACKSIZE CYGNUM_HAL_STACK_SIZE_TYPICAL
static cyg_handle_t thread[NTHREADS];
static cyg_thread thread_obj[NTHREADS];
static char stack[NTHREADS][STACKSIZE];
// -------------------------------------------------------------------------
// This is (tick time * 1.5)
#define TICK_DELAY (1500000 / CYGNUM_HAL_RTC_DENOMINATOR)
static void
entry0( cyg_addrword_t data )
{
int tick;
// Scheduler and thus timer interrupts are running by the
// time we get here.
// Wait for next tick
tick = cyg_current_time();
do {} while (cyg_current_time() == tick);
tick = cyg_current_time();
// Then mask timer interrupts
HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_RTC);
// and wait for the time when the next tick should have come
// and check it didn't trigger an interrupt
hal_delay_us(TICK_DELAY);
CYG_TEST_CHECK(cyg_current_time() == tick, "Timer interrupt while masked");
// Now change interrupt level, and make the check again. Changing
// level should not affect interrupt mask state.
HAL_INTERRUPT_SET_LEVEL(CYGNUM_HAL_INTERRUPT_RTC, 8);
hal_delay_us(TICK_DELAY);
CYG_TEST_CHECK(cyg_current_time() == tick,
"Timer interrupt after changing level");
// Finally unmask the interrupt and make sure it results in ticks.
HAL_INTERRUPT_UNMASK(CYGNUM_HAL_INTERRUPT_RTC);
hal_delay_us(TICK_DELAY);
CYG_TEST_CHECK(cyg_current_time() != tick,
"No timer interrupt after unmask");
CYG_TEST_PASS_FINISH("SH intr0 test end");
}
// -------------------------------------------------------------------------
externC void
cyg_start( void )
{
CYG_TEST_INIT();
cyg_thread_create(4, entry0 , (cyg_addrword_t)0, "intr",
(void *)stack[0], STACKSIZE, &thread[0], &thread_obj[0]);
cyg_thread_resume(thread[0]);
cyg_scheduler_start();
}
// -------------------------------------------------------------------------
#else // def CYGFUN_KERNEL_API_C
#define N_A_MSG "Kernel C API layer disabled"
#endif // def CYGFUN_KERNEL_API_C
#else // def CYGPKG_KERNEL
#define N_A_MSG "Needs kernel"
#endif // def CYGPKG_KERNEL
#ifdef N_A_MSG
externC void
cyg_start( void )
{
CYG_TEST_INIT();
CYG_TEST_NA( N_A_MSG );
}
#endif // N_A_MSG
// -------------------------------------------------------------------------
// EOF intr0.c
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -