cma230_serial.h
来自「开放源码实时操作系统源码.」· C头文件 代码 · 共 163 行
H
163 行
#ifndef CYGONCE_ARM_CMA230_SERIAL_H
#define CYGONCE_ARM_CMA230_SERIAL_H
// ====================================================================
//
// cma230_serial.h
//
// Device I/O - Description of Cogent CMA230 serial hardware
//
// ====================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
// ====================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): gthomas
// Contributors: gthomas
// Date: 1999-05-20
// Purpose: Internal interfaces for serial I/O drivers
// Description:
//
//####DESCRIPTIONEND####
//
// ====================================================================
// Description of serial ports on Cogent CMA230
struct serial_port {
unsigned char _byte[32];
};
#define reg(n) _byte[n*8]
// Receive control registers
#define rhr reg(0) // Receive holding register
#define isr reg(2) // Interrupt status register
#define lsr reg(5) // Line status register
#define msr reg(6) // Modem status register
#define scr reg(7) // Scratch register
// Transmit control registers
#define thr reg(0) // Transmit holding register
#define ier reg(1) // Interrupt enable register
#define fcr reg(2) // FIFO control register
#define lcr reg(3) // Line control register
#define mcr reg(4) // Modem control register
#define ldl reg(0) // LSB of baud rate
#define mdl reg(1) // MSB of baud rate
// Interrupt Enable Register
#define IER_RCV 0x01
#define IER_XMT 0x02
#define IER_LS 0x04
#define IER_MS 0x08
// Line Control Register
#define LCR_WL5 0x00 // Word length
#define LCR_WL6 0x01
#define LCR_WL7 0x02
#define LCR_WL8 0x03
#define LCR_SB1 0x00 // Number of stop bits
#define LCR_SB1_5 0x04 // 1.5 -> only valid with 5 bit words
#define LCR_SB2 0x04
#define LCR_PN 0x00 // Parity mode - none
#define LCR_PE 0x0C // Parity mode - even
#define LCR_PO 0x08 // Parity mode - odd
#define LCR_PM 0x28 // Forced "mark" parity
#define LCR_PS 0x38 // Forced "space" parity
#define LCR_DL 0x80 // Enable baud rate latch
// Line Status Register
#define LSR_RSR 0x01
#define LSR_THE 0x20
// Modem Control Register
#define MCR_DTR 0x01
#define MCR_RTS 0x02
#define MCR_INT 0x08 // Enable interrupts
// Interrupt status register
#define ISR_Tx 0x02
#define ISR_Rx 0x04
static unsigned char select_word_length[] = {
LCR_WL5, // 5 bits / word (char)
LCR_WL6,
LCR_WL7,
LCR_WL8
};
static unsigned char select_stop_bits[] = {
0,
LCR_SB1, // 1 stop bit
LCR_SB1_5, // 1.5 stop bit
LCR_SB2 // 2 stop bits
};
static unsigned char select_parity[] = {
LCR_PN, // No parity
LCR_PE, // Even parity
LCR_PO, // Odd parity
LCR_PM, // Mark parity
LCR_PS, // Space parity
};
// The Cogent board has a 3.6864 MHz crystal
static unsigned short select_baud[] = {
0, // Unused
4608, // 50
0, // 75
2094, // 110
0, // 134.5
1536, // 150
0, // 200
768, // 300
384, // 600
182, // 1200
0, // 1800
96, // 2400
0, // 3600
48, // 4800
32, // 7200
24, // 9600
16, // 14400
12, // 19200
6, // 38400
4, // 57600
2, // 115200
0, // 230400
};
#endif // CYGONCE_ARM_CMA230_SERIAL_H
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?