changelog

来自「开放源码实时操作系统源码.」· 代码 · 共 114 行

2007-06-01  Jim Seymour <[e-mail]>

	* src/at91_serial.c (at91_serial_DSR): Remove CYG_FAIL if receive
	buffer fills up; eliminate compiler warning when setting "end"
	pointer.

2006-03-05  Oliver Munz  <[e-mail]>

	* src/at91_serial.c (at91_serial_ISR): Only call the DSR if there
	is work to do.
	
2006-02-28  Andrew Lunn  <[e-mail]>
            Oliver Munz  <[e-mail]>

	* src/at91_serial.c (at91_serial_config_port): Enable the DMA
	if the control register exists.
	
2006-02-19  Andrew Lunn  <[e-mail]>

	* src/at91_serial.c (at91_serial_lookup): Enable the peripheral
	clock at lookup time to keep the power usage low.

2004-11-10  Sebastian Block <[e-mail]>

        * src/at91_serial.c: Added third port
        
2004-01-26  Andrew Lunn  <[e-mail]>

	* src/at91_serial.c (at91_serial_getc_polled) 
	* src/ay91_serial.c (at91_serial_putc_polled):
	Only define these functions if polled IO is configured so
	avoiding compiler warnings.

2004-01-16  Thomas Koeller  <[e-mail]>

	* src/at91_serial.c: If both a transmitter and a receiver
	interrupt arrive at the same time, process the receiver
	interrupt first.

2003-11-21  Thomas Koeller  <[e-mail]>

	* src/at91_serial.c: Fix endless loop that would occur if
	high-level driver was not ready to accept data received.

2003-11-07  Thomas Koeller  <[e-mail]>

	* src/at91_serial.c:
	* cdl/ser_arm_at91.cdl: Major rewrite to achieve reliable
	operation at higher baud rates.

2003-10-16  Nick Garnett  <[e-mail]>

	* src/at91_serial.c (at91_serial_config_port): Added update of
	channel configuration, which was missing.

2003-02-24  Jonathan Larmour  <[e-mail]>

	* cdl/ser_arm_at91.cdl: Remove irrelevant doc link.

2001-09-20  Jesper Skov  <[e-mail]>

	* src/at91_serial.c (at91_serial_init): Use valid interrupt priority.

2001-09-10  Jonathan Larmour  <[e-mail]>

        * cdl/ser_arm_at91.cdl:        
        Fix 234000->230400 typo.

2001-08-14  Jonathan Larmour  <[e-mail]>

	* src/at91_serial.c (at91_serial_stop_xmit): Write to IDR, not IER.
	(at91_serial_ISR): Return CYG_ISR_HANDLED.

2001-07-24  Gary Thomas  <[e-mail]>

	* src/at91_serial.h: 
	* src/at91_serial.c: 
	* cdl/ser_arm_at91.cdl: New file(s) - initial package.

//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================