upd985xx_eth.h

来自「开放源码实时操作系统源码.」· C头文件 代码 · 共 466 行 · 第 1/2 页

//      Table 5-3.  Statistics Counter Register Map
//      <snip>
//
//      Table 5-4.  DMA and FIFO Management Registers Map
//      
//      ETH_TXCR    0x200  Transmit Configuration Register    R/W    0000_0000H
#define ETH_TXCR_TXE      (1<<31) // Transmit Enable:
#define ETH_TXCR_DTBS_SHIFT (16)   // 18:16     DMA Transmit Burst Size:
#define ETH_TXCR_DTBS    (0x70000) // 18:16     DMA Transmit Burst Size:
#define ETH_TXCR_DTBS_1  (0x00000) // 000: 1 Word (4 bytes)
#define ETH_TXCR_DTBS_2  (0x10000) // 001: 2 Word (8 bytes)
#define ETH_TXCR_DTBS_4  (0x20000) // 010: 4 Word (16 bytes)
#define ETH_TXCR_DTBS_8  (0x30000) // 011: 8 Word (32 bytes)
#define ETH_TXCR_DTBS_16 (0x40000) // 100: 16 Word (64 bytes)
#define ETH_TXCR_DTBS_32 (0x50000) // 101: 32 Word (128 bytes)
#define ETH_TXCR_DTBS_64 (0x60000) // 110: 64 Word (256 bytes)
#define ETH_TXCR_AFCE     (1<< 0) // Auto Flow Control Enable:
//      ETH_TXFCR   0x204  Transmit FIFO Control Register    R/W    FFFF_40C0H
#define ETH_TXFCR_TPTV_SHIFT (16)      // 31:16 Transmit Pause Timer Value:    FFFFH
#define ETH_TXFCR_TPTV    (0xffff0000) // 31:16 Transmit Pause Timer Value:    FFFFH
#define ETH_TXFCR_TX_DRTH_SHIFT (10)   // 15:10 Transmit Drain Threshold Level:    10H
#define ETH_TXFCR_TX_DRTH (0x0000fc00) // 15:10 Transmit Drain Threshold Level:    10H
#define ETH_TXFCR_TX_FLTH_SHIFT (2)    //  7:2 Transmit Fill Threshold Level:    03H
#define ETH_TXFCR_TX_FLTH (0x000000fc) //  7:2 Transmit Fill Threshold Level:    03H
#define ETH_TXFCR_TPTV_DEFAULT    (0x10000000) // default 0x1000 slot time (1slot:512bit)
#define ETH_TXFCR_TX_DRTH_DEFAULT (0x00002000) // 001000b (8long, 32byte)
#define ETH_TXFCR_TX_FLTH_DEFAULT (0x000000c0) // default 110000b (48word, 192byte)
//      ETH_TXDTR   0x208  Transmit Data Register    W    0000_0000H
//      ETH_TXSR    0x20C  Transmit Status Register    R    0000_0000H
#define ETH_TXSR_CSE      (1<<31) // Carrier lost was detected during the transmission    0
#define ETH_TXSR_TBP      (1<<30) // Back pressure occurred when the packet was received    0
#define ETH_TXSR_TPP      (1<<29) // A packet request during the PAUSE operation was transmitted    0
#define ETH_TXSR_TPCF     (1<<28) // A PAUSE control frame was transmitted    0
#define ETH_TXSR_TCFR     (1<<27) // A control frame was transmitted    0
#define ETH_TXSR_TUDR     (1<<26) // The TPUR pin was set high and aborted. Note 2    0
#define ETH_TXSR_TGNT     (1<<25) // A huge packet was transmitted and aborted.  0
#define ETH_TXSR_LCOL     (1<<24) // Collision occurred
#define ETH_TXSR_ECOL     (1<<23) // Excess collisions
#define ETH_TXSR_TEDFR    (1<<22) // Excess deferred
#define ETH_TXSR_TDFR     (1<<21) // Transmission deferral occurred
#define ETH_TXSR_TBRO     (1<<20) // A broadcast packet was transmitted.    0
#define ETH_TXSR_TMUL     (1<<19) // A multicast packet was transmitted.    0
#define ETH_TXSR_TDONE    (1<<18) // Transmission was completed.    0
#define ETH_TXSR_TFLOR    (1<<17) // Value of the length field was huge
#define ETH_TXSR_TFLER    (1<<16) // Value of the length field didn~t match the actual data count
#define ETH_TXSR_TCRCE    (1<<15) // Attached CRC didn~t match the internal generated CRC

#define ETH_TXSR_TCBC_SHIFT  (11) // 14:11 collisions for the previous transmission
#define ETH_TXSR_TCBC    (0x7800) // 14:11 collisions for the previous transmission
#define ETH_TXSR_TBYT_SHIFT   (0) // 10:0  transmitted bytes not including collided bytes
#define ETH_TXSR_TBYT    (0x07FF) // 10:0  transmitted bytes not including collided bytes

//      ETH_RXCR   UPD985XX_SYSETH_REG( 0x218)   // Receive Configuration Register    R/W    0000_0000H
#define ETH_RXCR_RXE      (1<<31)  // Receive Enable:
#define ETH_RXCR_DRBS_SHIFT (16)   // 18:16    DRBS    DMA Transmit Burst Size:    0
#define ETH_RXCR_DRBS    (0x70000) //
#define ETH_RXCR_DRBS_1  (0x00000) // 000: 1 Word (4 bytes)
#define ETH_RXCR_DRBS_2  (0x10000) // 001: 2 Word (8 bytes)
#define ETH_RXCR_DRBS_4  (0x20000) // 010: 4 Word (16 bytes)
#define ETH_RXCR_DRBS_8  (0x30000) // 011: 8 Word (32 bytes)
#define ETH_RXCR_DRBS_16 (0x40000) // 100: 16 Word (64 bytes)
#define ETH_RXCR_DRBS_32 (0x50000) // 101: 32 Word (128 bytes)
#define ETH_RXCR_DRBS_64 (0x60000) // 110: 64 Word (256 bytes)

//      ETH_RXFCR   0x21C  Receive FIFO Control Register    R/W    C040_0040H
#define ETH_RXFCR_UWM     (0xfc000000) // 31:26  Upper Water Mark:    30H
#define ETH_RXFCR_UWM_SHIFT (26)       // 31:26  Upper Water Mark:    30H
#define ETH_RXFCR_LWM     (0x00fc0000) // 23:18  Lower Water Mark:    10H
#define ETH_RXFCR_LWM_SHIFT (18)       // 23:18  Lower Water Mark:    10H
#define ETH_RXFCR_RX_DRTH (0x000000fc) //  7: 2  Receive Drain Threshold Level    10H
#define ETH_RXFCR_RX_DRTH_SHIFT (2)    //  7: 2  Receive Drain Threshold Level    10H
#define ETH_RXFCR_UWM_DEFAULT (0xE0000000) // default 110000b ( 48word, 192byte )
#define ETH_RXFCR_LWM_DEFAULT (0x00400000) // default 010000b (16word, 64byte)
#define ETH_RXFCR_DRTH16W     (0x00000040) // default 010000b (16word, 64byte)

//      ETH_RXDTR   0x220  Receive Data Register    R    0000_0000H
//      ETH_RXSR    0x224  Receive Status Register    R    0000_0000H
#define ETH_RXSR_RLENE (1<<31) // A toosmall or toolarge packet was received.
#define ETH_RXSR_VLAN  (1<<30) // A VLAN was received.
#define ETH_RXSR_USOP  (1<<29) // A control frame containing an unknown OP code was received.
#define ETH_RXSR_PRCF  (1<<28) // A control frame containing the PAUSE OP code was received.
#define ETH_RXSR_RCFR  (1<<27) // A control frame was received.
#define ETH_RXSR_DBNB  (1<<26) // An alignment error occurred.
#define ETH_RXSR_RBRO  (1<<25) // A broadcast packet was received.    0
#define ETH_RXSR_RMUL  (1<<24) // A multicast packet was received.    0
#define ETH_RXSR_RXOK  (1<<23) // A good packet was received.
#define ETH_RXSR_RLOR  (1<<22) // The value of the length field was huge
#define ETH_RXSR_RLER  (1<<21) // The value of the length field didn~t match
#define ETH_RXSR_RCRCE (1<<20) // A CRC error occurred.    0
#define ETH_RXSR_RCV   (1<<19) // RXER was detected.    0
#define ETH_RXSR_CEPS  (1<<18) // A False Carrier was detected.    0
#define ETH_RXSR_REPS  (1<<17) // A packet which had a preamble and SFD only or one data nibble
#define ETH_RXSR_PAIG  (1<<16) // 
#define ETH_RXSR_RBYT (0xffff)  // 15:0  The received byte count    0
#define ETH_RXSR_RBYT_SHIFT (0) // 15:0  The received byte count    0
//      ETH_RXDPR   0x22C  Receive Descriptor Register    R/W    0000_0000H
//      ETH_RXPDR   0x230  Receive Pool Descriptor Register    R/W    0000_0000H
#define ETH_RXPDR_AL (0x70000000) // 30:28 AL[2:0] Alert Level 0H
#define ETH_RXPDR_AL_SHIFT (28)
#define ETH_RXPDR_RNOD (0xffff)  // 15:0 Remaining Number of Descriptor 0H
#define ETH_RXPDR_RNOD_SHIFT (0)
//      
//      Table 5-5.  Interrupt and Configuration Registers Map
//      
//      ETH_CCR     0x234  Configuration Register    R/W    0000_0000H
#define ETH_CCR_SRT (1) // Software Reset (cleared automatically to '0')               
//      ETH_ISR     0x238  Interrupt Service Register    R    0000_0000H 
#define ETH_ISR_XMTDN (1<<15) // Transmit Done 
#define ETH_ISR_TBDR  (1<<14) // Transmit Buffer Descriptor Request at Null 
#define ETH_ISR_TFLE  (1<<13) // Transmit Frame Length Exceed 
#define ETH_ISR_UR    (1<<12) // Underrun 
#define ETH_ISR_TABR  (1<<11) // Transmit Aborted 
#define ETH_ISR_TCFRI (1<<10) // Control Frame Transmit 
#define ETH_ISR_RCVDN (1<<7 ) // Receive Done 
#define ETH_ISR_RBDRS (1<<6 ) // Receive Buffer Descriptor Request at alert level 
#define ETH_ISR_RBDRU (1<<5 ) // Receive Buffer Descriptor Request at zero 
#define ETH_ISR_OF    (1<<4 ) //      Overflow     
#define ETH_ISR_LFAL  (1<<3 ) // Link Failed 
#define ETH_ISR_CARRY (1<<0 ) // Carry Flag:
//      ETH_MSR     0x23C  Mask Serves Register    R/W    0000_0000H
// As above

// --------------------------------------------------------------------------
// And the "buffer descriptor" control structures in RAM...


#define ETH_BUF_LAST      (1<<31) // Last Descriptor
#define ETH_BUF_D_L       (1<<30) // Data Buffer / Link Pointer
#define ETH_BUF_D_L_DATA  (1<<30) // Data Buffer / Link Pointer
#define ETH_BUF_D_L_LINK  (0<<30) // Data Buffer / Link Pointer
#define ETH_BUF_OWN       (1<<29) // Owner  1:Ethernet Controller  0: VR4120A
#define ETH_BUF_OWN_ETH   (1<<29)
#define ETH_BUF_OWN_CPU   (0<<29)

#define ETH_BUF_DBRWE     (1<<28) // Buffer Access Error
#define ETH_BUF_OK        (1<<16) // Tx or Rx OK
#define ETH_BUF_SIZE     (0xffff) // Byte Count
                                 
#define ETH_BUF_TX_TUDR   (1<<27) // Transmit Underrun Error
#define ETH_BUF_TX_CSE    (1<<26) // Carrier Sense Lost Error
#define ETH_BUF_TX_LCOL   (1<<25) // Late Collision
#define ETH_BUF_TX_ECOL   (1<<24) // Excessive Collision
#define ETH_BUF_TX_EDFR   (1<<23) // Excessive Deferral
#define ETH_BUF_TX_TGNT   (1<<18) // Transmit Giant Frame
#define ETH_BUF_TX_HBF    (1<<17) // Heart Beat Fail for ENDEC mode
                                 
#define ETH_BUF_RX_OVRN   (1<<24) // Overrun Error
#define ETH_BUF_RX_RUNT   (1<<23) // Runt packet
#define ETH_BUF_RX_FRGE   (1<<22) // Fragment Error
#define ETH_BUF_RX_RCV    (1<<21) // Detects RXER
#define ETH_BUF_RX_FC     (1<<20) // False Carrier
#define ETH_BUF_RX_CRCE   (1<<19) // CRC Error
#define ETH_BUF_RX_FAE    (1<<18) // Frame Alignment Error
#define ETH_BUF_RX_RFLE   (1<<17) // Receive Frame Length Error

#define ETH_BUF_RX_FTYP (0x0e000000) // 27:25 Frame Type[2:0]
#define ETH_BUF_RX_FTYP_SHIFT (25)   // 27:25 Frame Type[2:0]
// I don't think we need to know these...
//                000 Broadcast Frame
//                001 Multicast Frame
//                010 Unicast Frame
//                011 VLAN Frame
//                100 PAUSE control frame
//                101 Control Frame (except pause)
//                11x Reserved for future use


// --------------------------------------------------------------------------
// MII stuff for talking to the separate PHY
// Initially this was a SEEQ NQ80225 but now it is a LU3X31T-T64.

//#define SEEQ_DEVICE_PHYS_ADDRESS (1) // this from the board documentation
#define LU3X31T_DEVICE_PHYS_ADDRESS (2)

#define ETH_MADR_PHY_DEVICE_PHYS_ADDRESS \
   (LU3X31T_DEVICE_PHYS_ADDRESS << ETH_MADR_PHY_ADDR_SHIFT)

// I don't know how much they have in common, but I think MII is pretty
// standard, and the "mandated" registers ought to be common.

#define PHY_CONTROL_REG     (0)
#define PHY_STATUS_REG      (1)
#define PHY_ID_ONE          (2)
#define PHY_ID_TWO          (3)
#define PHY_AUTONEG_ADVERT  (4)
#define PHY_AUTONEG_REMOTE  (5)
#define PHY_STATUS_DETECT_REG (18)

#define PHY_CONTROL_RESET           (1<<15)
#define PHY_CONTROL_LOOPBACK        (1<<14)
#define PHY_CONTROL_SPEED100        (1<<13)
#define PHY_CONTROL_AUTONEG_EN      (1<<12)
#define PHY_CONTROL_POWERDOWN       (1<<11)
#define PHY_CONTROL_MII_DIS         (1<<10)
#define PHY_CONTROL_AUTONEG_RST     (1<< 9)
#define PHY_CONTROL_DPLX_FULL       (1<< 8)
#define PHY_CONTROL_COLLTEST        (1<< 7)
  
#define PHY_STATUS_CAP_T4           (1<<15)
#define PHY_STATUS_CAP_100TXF       (1<<14)
#define PHY_STATUS_CAP_100TXH       (1<<13)
#define PHY_STATUS_CAP_10TF         (1<<12)
#define PHY_STATUS_CAP_10TH         (1<<11)
#define PHY_STATUS_CAP_SUPR         (1<< 6)
#define PHY_STATUS_AUTONEG_ACK      (1<< 5)
#define PHY_STATUS_REMOTEFAULT      (1<< 4)
#define PHY_STATUS_CAP_AUTONEG      (1<< 3)
#define PHY_STATUS_LINK_OK          (1<< 2)
#define PHY_STATUS_JABBER           (1<< 1)
#define PHY_STATUS_EXTREGS          (1<< 0)

// These are the same for both AUTONEG registers
#define PHY_AUTONEG_NEXT            (1<<15)
#define PHY_AUTONEG_ACK             (1<<14)
#define PHY_AUTONEG_REMOTEFAULT     (1<<13)
#define PHY_AUTONEG_100BASET4       (1<< 9)
#define PHY_AUTONEG_100BASETX_FDX   (1<< 8)
#define PHY_AUTONEG_100BASETX_HDX   (1<< 7)
#define PHY_AUTONEG_10BASET_FDX     (1<< 6)
#define PHY_AUTONEG_10BASET_HDX     (1<< 5)
#define PHY_AUTONEG_CSMA_802_3      (1<< 0)

#if 0
// Others are undocumented
#define PHY_STATUS_DETECT_SPEED100   (1<< 7)
#define PHY_STATUS_DETECT_DPLX_FULL  (1<< 6)
#endif

// Phew!
// --------------------------------------------------------------------------
#endif // CYGONCE_HAL_UPD985XX_ETH_H
// End of upd985xx_eth.h