usb_fpga.fit.qmsg

ＥＺ－ＵＳＢ控制器６８０１３ＧＰＩＦ－ＦＩＦＯ读写的Ｃ语言程序

{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" {  } {  } 0 0 "Fitter is using %2!s! packing mode for logic elements with %1!s! setting for Auto Packed Registers logic option" 0 0}
{ "Info" "IFSAC_FSAC_START_LUT_IO_RAM_PACKING" "" "Info: Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" {  } {  } 0 0 "Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" 0 0}
{ "Info" "IFSAC_FSAC_FINISH_LUT_IO_RAM_PACKING" "" "Info: Finished moving registers into I/O cells, LUTs, and RAM blocks" {  } {  } 0 0 "Finished moving registers into I/O cells, LUTs, and RAM blocks" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" {  } {  } 0 0 "Finished register packing" 0 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "39 unused 3.30 0 39 0 " "Info: Number of I/O pins in group: 39 (unused VREF, 3.30 VCCIO, 0 input, 39 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "LVTTL. " "Info: I/O standards used: LVTTL." {  } {  } 0 0 "I/O standards used: %1!s!" 0 0}  } {  } 0 0 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use 3.30V 11 33 " "Info: I/O bank number 1 does not use VREF pins and has 3.30V VCCIO pins. 11 total pin(s) used --  33 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use 3.30V 27 21 " "Info: I/O bank number 2 does not use VREF pins and has 3.30V VCCIO pins. 27 total pin(s) used --  21 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use 3.30V 11 34 " "Info: I/O bank number 3 does not use VREF pins and has 3.30V VCCIO pins. 11 total pin(s) used --  34 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use unused 0 48 " "Info: I/O bank number 4 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  48 pins available" {  } {  } 0 0 "I/O bank number %1!d! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0}
{ "Info" "IFSAC_FSAC_RAM_METASTABILITY_INFO" "" "Info: Design uses memory blocks. Violating setup or hold times of memory block address registers could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements." {  } {  } 0 0 "Design uses memory blocks. Violating setup or hold times of memory block address registers could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements." 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}