rimebuf.h

传感器网络操作系统contiki。 被广泛应用于环境检测、结构健康监测等等。包括路由协议

/**
 * \addtogroup rime
 * @{
 */

/**
 * \defgroup rimebuf Rime buffer management
 * @{
 *
 * The rimebuf module does Rime's buffer management.
 */

/*
 * Copyright (c) 2006, Swedish Institute of Computer Science.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the Institute nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * This file is part of the Contiki operating system.
 *
 * $Id: rimebuf.h,v 1.10 2007/10/25 12:48:46 adamdunkels Exp $
 */

/**
 * \file
 *         Header file for the Rime buffer (rimebuf) management
 * \author
 *         Adam Dunkels <[e-mail]>
 */

#ifndef __RIMEBUF_H__
#define __RIMEBUF_H__

#include "contiki-conf.h"

/**
 * \brief      The size of the rimebuf, in bytes
 */
#ifdef RIMEBUF_CONF_SIZE
#define RIMEBUF_SIZE RIMEBUF_CONF_SIZE
#else
#define RIMEBUF_SIZE 128
#endif

/**
 * \brief      The size of the rimebuf header, in bytes
 */
#ifdef RIMEBUF_CONF_HDR_SIZE
#define RIMEBUF_HDR_SIZE RIMEBUF_CONF_HDR_SIZE
#else
#define RIMEBUF_HDR_SIZE 32
#endif

/**
 * \brief      Clear and reset the rimebuf
 *
 *             This function clears the rimebuf and resets all
 *             internal state pointers (header size, header pointer,
 *             external data pointer). It is used before preparing a
 *             packet in the rimebuf.
 *
 */
void rimebuf_clear(void);

/**
 * \brief      Get a pointer to the data in the rimebuf
 * \return     Pointer to the rimebuf data
 *
 *             This function is used to get a pointer to the data in
 *             the rimebuf. The data is either stored in the rimebuf,
 *             or referenced to an external location.
 *
 *             For outbound packets, the rimebuf consists of two
 *             parts: header and data. The header is accessed with the
 *             rimebuf_hdrptr() function.
 *
 *             For incoming packets, both the packet header and the
 *             packet data is stored in the data portion of the
 *             rimebuf. Thus this function is used to get a pointer to
 *             the header for incoming packets.
 *
 */
void *rimebuf_dataptr(void);

/**
 * \brief      Get a pointer to the header in the rimebuf, for outbound packets
 * \return     Pointer to the rimebuf header
 *
 *             For outbound packets, the rimebuf consists of two
 *             parts: header and data. This function is used to get a
 *             pointer to the header in the rimebuf. The header is
 *             stored in the rimebuf.
 *
 */
void *rimebuf_hdrptr(void);

/**
 * \brief      Get the length of the header in the rimebuf, for outbound packets
 * \return     Length of the header in the rimebuf
 *
 *             For outbound packets, the rimebuf consists of two
 *             parts: header and data. This function is used to get
 *             the length of the header in the rimebuf. The header is
 *             stored in the rimebuf and accessed via the
 *             rimebuf_hdrptr() function.
 *
 */
u8_t rimebuf_hdrlen(void);


/**
 * \brief      Get the length of the data in the rimebuf
 * \return     Length of the data in the rimebuf
 *
 *             For outbound packets, the rimebuf consists of two
 *             parts: header and data. This function is used to get
 *             the length of the data in the rimebuf. The data is
 *             stored in the rimebuf and accessed via the
 *             rimebuf_dataptr() function.
 *
 *             For incoming packets, both the packet header and the
 *             packet data is stored in the data portion of the
 *             rimebuf. This function is then used to get the total
 *             length of the packet - both header and data.
 *
 */
u16_t rimebuf_datalen(void);

/**
 * \brief      Get the total length of the header and data in the rimebuf
 * \return     Length of data and header in the rimebuf
 *
 */
u16_t rimebuf_totlen(void);

/**
 * \brief      Set the length of the data in the rimebuf
 * \param len  The length of the data
 *
 *             For outbound packets, the rimebuf consists of two
 *             parts: header and data. This function is used to set
 *             the length of the data in the rimebuf.
 */
void rimebuf_set_datalen(u16_t len);

/**
 * \brief      Point the rimebuf to external data
 * \param ptr  A pointer to the external data
 * \param len  The length of the external data
 *
 *             For outbound packets, the rimebuf consists of two
 *             parts: header and data. This function is used to make
 *             the rimebuf point to external data. The function also
 *             specifies the length of the external data that the
 *             rimebuf references.
 */
void rimebuf_reference(void *ptr, u16_t len);

/**
 * \brief      Check if the rimebuf references external data
 * \retval     Non-zero if the rimebuf references external data, zero otherwise.
 *
 *             For outbound packets, the rimebuf consists of two
 *             parts: header and data. This function is used to check
 *             if the rimebuf points to external data that has
 *             previously been referenced with rimebuf_reference().
 *
 */
int rimebuf_is_reference(void);

/**
 * \brief      Get a pointer to external data referenced by the rimebuf
 * \retval     A pointer to the external data
 *
 *             For outbound packets, the rimebuf consists of two
 *             parts: header and data. The data may point to external
 *             data that has previously been referenced with
 *             rimebuf_reference(). This function is used to get a
 *             pointer to the external data.
 *
 */
void *rimebuf_reference_ptr(void);

/**
 * \brief      Compact the rimebuf
 *
 *             This function compacts the rimebuf by copying the data
 *             portion of the rimebuf so that becomes consecutive to
 *             the header. It also copies external data that has
 *             previously been referenced with rimebuf_reference()
 *             into the rimebuf.
 *
 *             This function is called by the Rime code before a
 *             packet is to be sent by a device driver. This assures
 *             that the entire packet is consecutive in memory.
 *
 */
void rimebuf_compact(void);

/**
 * \brief      Copy from external data into the rimebuf
 * \param from A pointer to the data from which to copy
 * \param len  The size of the data to copy
 * \retval     The number of bytes that was copied into the rimebuf
 *
 *             This function copies data from a pointer into the
 *             rimebuf. If the data that is to be copied is larger
 *             than the rimebuf, only the data that fits in the
 *             rimebuf is copied. The number of bytes that could be
 *             copied into the rimbuf is returned.
 *
 */
int rimebuf_copyfrom(const u8_t *from, u16_t len);

/**
 * \brief      Copy the entire rimebuf to an external buffer
 * \param to   A pointer to the buffer to which the data is to be copied
 * \retval     The number of bytes that was copied to the external buffer
 *
 *             This function copies the rimebuf to an external
 *             buffer. Both the data portion and the header portion of
 *             the rimebuf is copied. If the rimebuf referenced
 *             external data (referenced with rimebuf_reference()) the
 *             external data is copied.
 *
 *             The external buffer to which the rimebuf is to be
 *             copied must be able to accomodate at least
 *             (RIMEBUF_SIZE + RIMEBUF_HDR_SIZE) bytes. The number of
 *             bytes that was copied to the external buffer is
 *             returned.
 *
 */
int rimebuf_copyto(u8_t *to);

/**
 * \brief      Copy the header portion of the rimebuf to an external buffer
 * \param to   A pointer to the buffer to which the data is to be copied
 * \retval     The number of bytes that was copied to the external buffer
 *
 *             This function copies the header portion of the rimebuf
 *             to an external buffer.
 *
 *             The external buffer to which the rimebuf is to be
 *             copied must be able to accomodate at least
 *             RIMEBUF_HDR_SIZE bytes. The number of bytes that was
 *             copied to the external buffer is returned.
 *
 */
int rimebuf_copyto_hdr(u8_t *to);

/**
 * \brief      Extend the header of the rimebuf, for outbound packets
 * \param size The number of bytes the header should be extended
 * \retval     Non-zero if the header could be extended, zero otherwise
 *
 *             This function is used to allocate extra space in the
 *             header portion in the rimebuf, when preparing outbound
 *             packets for transmission. If the function is unable to
 *             allocate sufficient header space, the function returns
 *             zero and does not allocate anything.
 *
 */
int rimebuf_hdralloc(int size);

/**
 * \brief      Reduce the header in the rimebuf, for incoming packets
 * \param size The number of bytes the header should be reduced
 * \retval     Non-zero if the header could be reduced, zero otherwise
 *
 *             This function is used to remove the first part of the
 *             header in the rimebuf, when processing incoming
 *             packets. If the function is unable to remove the
 *             requested amount of header space, the function returns
 *             zero and does not allocate anything.
 *
 */
int rimebuf_hdrreduce(int size);

#endif /* __RIMEBUF_H__ */
/** @} */
/** @} */