msp430x20x3_wdt_05.s43

来自「LSD-EZ430-F2013在IAR环境下的汇编语言开发例程」· S43 代码 · 共 48 行

;*******************************************************************************
;   MSP430F20xx Demo - Reset on Invalid Address fetch, Toggle P1.0
;
;   Description: Toggle P1.0 by xor'ing P1.0 inside of a software loop that
;   ends with TAR loaded with 3FFFh - op-code for "jmp $" This simulates a code
;   error. The MSP430F2xx will force a reset because it will not allow a fetch
;   from within the address range of the peripheral memory, as is seen by
;   return to the mainloop and LED flash.
;   In contrast, an MSP430F1xx device will "jmp $" stopping code execution with
;   no LED flash.
;   ACLK = n/a, MCLK = SMCLK = default DCO
;
;                MSP430F20xx
;             -----------------
;         /|\|              XIN|-
;          | |                 |
;          --|RST          XOUT|-
;            |                 |
;            |             P1.0|-->LED
;
;   M. Buccini / L. Westlund
;   Texas Instruments, Inc
;   October 2005
;   Built with IAR Embedded Workbench Version: 3.40A
;*******************************************************************************
#include  "msp430x20x3.h"
;-------------------------------------------------------------------------------
            ORG     0F800h                  ; Program Reset
;-------------------------------------------------------------------------------
RESET       mov.w   #0280h,SP               ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupP1     bis.b   #001h,&P1DIR            ; P1.0 output
            mov.w   #03FFFh,&TAR            ; "jmp $"
                                            ;				
Mainloop    xor.b   #001h,&P1OUT            ; Toggle P1.0
Wait        mov.w   #050000,R15             ; Delay to R15
L1          dec.w   R15                     ; Decrement R15
            jnz     L1                      ; Delay over?
            mov     #0170h,PC               ; Invalid fetch
            jmp     Mainloop                ; Again
                                            ;
;-------------------------------------------------------------------------------
;           Interrupt Vectors Used MSP430
;-------------------------------------------------------------------------------
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ;
            END