msp430x20x3_ta_07.s43

LSD-EZ430-F2013在IAR环境下的汇编语言开发例程

;*******************************************************************************
;   MSP430F20xx Demo - Timer_A, Toggle P1.0-3, Cont. Mode ISR, DCO SMCLK
;
;   Description: Use Timer_A CCRx units and overflow to generate four
;   independent timing intervals. For demonstration, CCR0 and CCR1
;   output units are optionally selected with port pins P1.1 and P1.2
;   in toggle mode. As such, these pins will toggle when respective CCRx
;   registers match the TAR counter. Interrupts are also enabled with all
;   CCRx units, software loads offset to next interval only - as long as the
;   interval offset is added to CCRx, toggle rate is generated in hardware.
;   Timer_A overflow ISR is used to toggle P1.0 with software. Proper use
;   of the TAIV interrupt vector generator is demonstrated.
;   ACLK = n/a, MCLK = SMCLK = TACLK = default DCO ~1MHz
;
;   As coded with TACLK ~800kHz DCO, toggle rates:
;   P1.1 = CCR0 ~ 1MHz/(2*200) ~2500Hz
;   P1.2 = CCR1 ~ 1MHz/(2*1000) ~500Hz
;   P1.0 = overflow = 1MHz/(2*65536) ~8Hz
;
;                MSP430F20xx
;             -----------------
;         /|\|              XIN|-
;          | |                 |
;          --|RST          XOUT|-
;            |                 |
;            |         P1.1/TA0|--> CCR0
;            |         P1.2/TA1|--> CCR1
;            |             P1.0|--> Overflow/software
;
;   M. Buccini / L. Westlund
;   Texas Instruments Inc.
;   October 2005
;   Built with IAR Embedded Workbench Version: 3.40A
;*******************************************************************************
#include  "msp430x20x3.h"
;-------------------------------------------------------------------------------
            ORG     0F800h                  ; Program Reset
;-------------------------------------------------------------------------------
RESET       mov.w   #0280h,SP               ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupP1     bis.b   #00Eh,&P1SEL            ; P1.1 - P1.3 option select
            bis.b   #00Fh,&P1DIR            ; P1.0-3 outputs
SetupC0     mov.w   #OUTMOD_4+CCIE,&CCTL0   ; CCR0 toggle, interrupt enabled
SetupC1     mov.w   #OUTMOD_4+CCIE,&CCTL1   ; CCR1 toggle, interrupt enabled
SetupTA     mov.w   #TASSEL_2+MC_2+TAIE,&TACTL   ; SMCLK, contmode, interrupt
                                            ;						
Mainloop    bis.w   #CPUOFF+GIE,SR          ; CPU off, interrupts enabled
            nop                             ; Required for debugger
                                            ;
;-------------------------------------------------------------------------------
TA0_ISR;
;-------------------------------------------------------------------------------
            add.w   #200,&CCR0              ; Offset until next interrupt
            reti                            ;		
                                            ;
;-------------------------------------------------------------------------------
TAX_ISR;    Common ISR for CCR1-4 and overflow
;-------------------------------------------------------------------------------
            add.w   &TAIV,PC                ; Add Timer_A offset vector
            reti                            ; CCR0 - no source
            jmp     CCR1_ISR                ; CCR1
            reti                            ; CCR2
            reti                            ; CCR3
            reti                            ; CCR4
TA_over     xor.b   #001h,&P1OUT            ; Toggle P1.0
            reti                            ; Return from overflow ISR		
                                            ;
CCR1_ISR    add.w   #1000,&CCR1             ; Offset until next interrupt
            reti                            ; Return ISR		
                                            ;
;-------------------------------------------------------------------------------
;           Interrupt Vectors
;-------------------------------------------------------------------------------
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ;
            ORG     0FFF2h                  ; Timer_A0 Vector
            DW      TA0_ISR                 ;
            ORG     0FFF0h                  ; Timer_AX Vector
            DW      TAX_ISR                 ;
            END