msp430x20x2_adc10_06.s43

LSD-EZ430-F2013在IAR环境下的汇编语言开发例程

;*******************************************************************************
;   MSP430F20x2 Demo - ADC10, Output Internal Vref on P1.4 & ADCCLK on P1.3
;
;   Description: Output ADC10 internal Vref on P1.4, toggling between two
;   available options, 2.5V and 1.5V. ADC10OSC also output on P1.3.
;
;                MSP430F20x2
;             ----------------
;         /|\|             XIN|-
;          | |                |
;          --|RST         XOUT|-
;            |                |
;            |   P1.3/ADC10CLK|--> ADC10OSC ~ 3.5MHz - 6.5MHz
;            |         P1.4/A4|--> Vref
;
;   L. Westlund
;   Texas Instruments Inc.
;   May 2006
;   Built with IAR Embedded Workbench Version: 3.41A
;*******************************************************************************
#include "msp430x20x2.h"
;-------------------------------------------------------------------------------
            RSEG    CSTACK                  ; Define stack segment
;-------------------------------------------------------------------------------
            RSEG    CODE                    ; Assemble to Flash memory
;-------------------------------------------------------------------------------
RESET       mov.w   #SFE(CSTACK),SP         ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupADC10  mov.w   #CONSEQ_2,&ADC10CTL1    ; Repeat single channel
            mov.w   #REFOUT+REFON+MSC+ADC10ON,&ADC10CTL0; ADC10 and VRef
            mov.w   #30,&TACCR0             ; Delay to allow Ref to settle
            bis.w   #CCIE,&TACCTL0          ; Compare-mode interrupt.
            mov.w   #TACLR+MC_1+TASSEL_2,&TACTL; up mode, SMCLK
            bis.w   #LPM0+GIE,SR            ; Enter LPM0, enable interrupts
            bic.w   #CCIE,&TACCTL0          ; Disable timer interrupt
            dint                            ; Disable Interrupts
            bis.b   #010h,&ADC10AE0         ; P1.4 = ADC10 option select
            bis.b   #008h,&P1DIR            ; P1.3 = output directon
            bis.b   #008h,&P1SEL            ; P1.3 = ADC10OSC option select
                                            ;
Mainloop    bic.w   #ENC,&ADC10CTL0         ; ADC10 disable
            xor.w   #REF2_5V,&ADC10CTL0     ; Toggle Vref 1.5/2.5V
            bis.w   #ENC+ADC10SC,&ADC10CTL0 ; ADC10 enable, start conversion
Delay       mov.w   #00Fh,R15               ; Long Delay
            mov.w   #0,R14                  ;
Delay_1     dec.w   R14                     ;
            sbc.w   R15                     ;
            jnz     Delay_1                 ;
            jmp     Mainloop                ;
                                            ;
;-------------------------------------------------------------------------------
TA0_ISR;    ISR for TACCR0
;-------------------------------------------------------------------------------
            clr.w   &TACTL                  ; Clear Timer_A control registers
            bic.w   #LPM0,0(SP)             ; Exit LPM0 on reti
            reti                            ;
;-------------------------------------------------------------------------------
            COMMON  INTVEC                  ; Interrupt Vectors
;-------------------------------------------------------------------------------
            ORG     TIMERA0_VECTOR          ; Timer_A0 Vector
            DW      TA0_ISR
            ORG     RESET_VECTOR            ; POR, ext. Reset
            DW      RESET
            END