msp430x20x3_p1_02.s43

LSD-EZ430-F2013在IAR环境下的汇编语言开发例程

;*******************************************************************************
;   MSP430F20xx Demo - Software Port Interrupt on P1.4 from LPM4
;
;   Description: A hi/low transition on P1.4 will trigger P1_ISR which,
;   toggles P1.0. Normal mode is LPM4 ~ 0.1uA. LPM4 current can be measured
;   with the LED removed, all unused P1.x/P2.x configured as output or inputs
;   pulled high or low, and ensure the P2.0 interrupt input does not float.
;   ACLK = n/a, MCLK = SMCLK = default DCO
;
;                MSP430F20xx
;             -----------------
;         /|\|              XIN|-
;          | |                 |
;          --|RST          XOUT|-
;      /|\   |                 |
;       --o--|P1.4         P1.0|-->LED
;      \|/
;
;   M. Buccini / L. Westlund
;   Texas Instruments Inc.
;   October 2005
;   Built with IAR Embedded Workbench Version: 3.40A
;*******************************************************************************
#include  "msp430x20x3.h"
;-------------------------------------------------------------------------------
            ORG     0F800h                  ; Program Reset
;-------------------------------------------------------------------------------
RESET       mov.w   #0280h,SP               ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupPx     bis.b   #001h,&P1DIR            ; P1.0 output
            bis.b   #010h,&P1IE             ; P1.4 Interrupt enabled
            bis.b   #010h,&P1IES            ; P1.4 hi/low edge
            bic.b   #010h,&P1IFG            ; P1.4 IFG Cleared
                                            ;
Mainloop    bis.w   #LPM4+GIE,SR            ; LPM4, enable interrupts
            nop                             ; Required only for debugger
                                            ;
;-------------------------------------------------------------------------------
P1_ISR;     Toggle P1.0 Output
;-------------------------------------------------------------------------------
            xor.b   #001h,&P1OUT            ; P1.0 = toggle
            bic.b   #010h,&P1IFG            ; P1.4 IFG Cleared
            reti                            ; Return from ISR
                                            ;
;-------------------------------------------------------------------------------
;           Interrupt Vectors
;-------------------------------------------------------------------------------
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ;
            ORG     0FFE4h                  ; P1.x Vector
            DW      P1_ISR                  ;
            END