halstack.c

ucos在NEC平台下的移植

					if (!local_radio_flags.bits.listen_mode && !util_accept_packet(pBuf+6)) {
						DEBUG_STRING(2,"Packet rejected by address filtering\n");
						goto DoSharedMemTxRx_exit;
					}
					//see if MAC has room
					if (macRxBuffFull()) {
						DEBUG_STRING(2,"MAC Rx buffer is full, rejecting packet!\n");
						goto DoSharedMemTxRx_exit;
					}
					//now copy the payload
                                   newpkt = MemAlloc(pktlen);
					CopyMemory(newpkt,(PVOID)(pBuf+sizeof(UINT32)+2),pktlen);
					DEBUG_STRING(DBG_INFO,"In shared memory, received msg size: ");
					DEBUG_UINT8(DBG_INFO,pktlen);
					DEBUG_STRING(DBG_INFO,"\n");
					///phyRxCallback();
                              ///     macRxCallback(newpkt, *(newpkt+pktlen-2)); //rssi byte
                                  //before returning, see if this packet had an ACK request
 					if (LRWPAN_GET_ACK_REQUEST(fcflsb)&& !local_radio_flags.bits.listen_mode) {
						//we just received a packet with request for ACK
						//and we are not in listen mode, so do autoack
						//the AUTOACK will wipe out this packet for other Node processes
						//that have not yet read it, but this is ok because is the
						//ACK request bit is set, then there is only one recipeient
						hdr = (UINT32 *)&pSharedMem[0];
		                //write the TX in progress flag
		                *hdr = 1;
						//copy the global msg ID
		                last_global_msg_id = *(hdr+1);
						write_shmem_hdr(&pktbuf[0], mypid, tx_msgid, LRWPAN_ACKFRAME_LENGTH+1);
						tx_msgid++;
						//format the packet same as way as it sits in RXFIFO
						//as this is how we pass it to MAC routines
                                           pktbuf[6] = LRWPAN_ACKFRAME_LENGTH; //length, NOT including packet
						//format the fcslsb
						pktbuf[7] = LRWPAN_FRAME_TYPE_ACK;  //fcslsb
						pktbuf[8] = 0;  //fcsMSB
						pktbuf[9] = dsn;
						pktbuf[10] = util_get_rssi();
						pktbuf[11] = util_get_CRC();
						CopyMemory((PVOID)pBuf, &pktbuf[0], 12);
						*(hdr+2) = halGetMACTimer();  //write transmit start time to header
						//clear the TX in progress
		                *hdr = 0;
		                //increment the global msg id
		                *(hdr+1) = *(hdr+1) + 1;
                        last_global_msg_id = *(hdr+1); //save it
						Sleep(0);  //send the ack, give time to read
						DEBUG_STRING(2,"Sent auto-ack\n");
						goto DoSharedMemTxRx_exit;
					}

				}

		}
	} else {
		DEBUG_STRING(DBG_INFO,"Writing to shared memory..\n");
		hdr = (UINT32 *)&pSharedMem[0];
		phyTxStartCallBack();
		//write the TX in progress flag
		*hdr = 1;
		//copy the global msg ID
		last_global_msg_id = *(hdr+1);
		write_shmem_hdr(&pktbuf[0], mypid, tx_msgid, plen);
		memcpy(&pktbuf[6],pload,plen);
		//now copy to shared memory
		CopyMemory((PVOID)pBuf, &pktbuf[0], plen+ sizeof(UINT32)+2);
		*(hdr+2) = halGetMACTimer();  //write transmit start time to header
		//clear the TX in progress
		*hdr = 0;
		//increment the global msg id
		*(hdr+1) = *(hdr+1) + 1;
        last_global_msg_id = *(hdr+1); //save it
		//now do TX
		tx_msgid++;
	}

DoSharedMemTxRx_exit:
	//release Mutex
	rc = ReleaseMutex(hMutex);
	if (!rc) printf("Release Mutex failed!");
}



//halInit contains both processor specific initialization
void halInit(void){
    radio_state = RADIO_STATE_OFF;
	local_radio_flags.val = 0;
	halInitUart();  
	//use to create named pipe;
	halInitMACTimer();
	InitSharedMemory();
}


#ifdef WIN32_VCON_ID
HANDLE hPipe;  //COM port handle

char pipeName[48];
//implement a virtual console interface using named pipes
void halInitUart(void){
   sprintf(pipeName,"\\\\.\\pipe\\VCONPIPE_%d",WIN32_VCON_ID);
   printf("Waiting on virtual console pipe\n");
	while(1) {
		Sleep(100);
		//// 等待与服务器的连接
		if (WaitNamedPipe(pipeName,NMPWAIT_USE_DEFAULT_WAIT))
		    break;
		
	}
    printf("Virtual console pipe now available\n");
	     ////打开已经创建的管道句柄
	hPipe = CreateFile (pipeName,
		GENERIC_ALL, 
		0, 
		0, 
		OPEN_EXISTING,
		0,
		0);

	if (hPipe == INVALID_HANDLE_VALUE) {
		printf("Error opening Pipe\n");
	}

}
//get a character from serial port
char halGetch(void){
	DWORD bytes_read;
	char c;

	ReadFile(hPipe,&c,1,&bytes_read,NULL);
	return(c);	
}

//write a character to serial port
// Uses UART initialized by halInitUart

void halPutch(char c){
    DWORD bytes_written;
	WriteFile(hPipe,&c,1,&bytes_written,0);
}

void halRawPut(char c){
    DWORD bytes_written;
	WriteFile(hPipe,&c,1,&bytes_written,0);
}

ZBOOL halGetchRdy(void) {
	DWORD num_avail;
	ZBOOL fSuccess;

 //fSuccess = PeekNamedPipe(hPipe,NULL,0,NULL,(LPDWORD)&num_avail,NULL);                         
 //return(fSuccess && num_avail);
	return(TRUE);
}




#else
//we are going to initialize the console to single character
//input, and no echo to emulate the micro
void halInitUart(void) {
     DWORD cRead, cWritten, fdwMode, fdwOldMode; 


	hStdin = GetStdHandle(STD_INPUT_HANDLE); 
    hStdout = GetStdHandle(STD_OUTPUT_HANDLE); 
    if (hStdin == INVALID_HANDLE_VALUE || 
        hStdout == INVALID_HANDLE_VALUE) 
    {
        MessageBox(NULL, "GetStdHandle", "Console Error", MB_OK);
        return;
    }

    if (! GetConsoleMode(hStdin, &fdwOldMode)) 
    {
        MessageBox(NULL, "GetConsoleMode", "Console Error", MB_OK); 
        return;
    }

	fdwMode = fdwOldMode & 
        ~(ENABLE_LINE_INPUT | ENABLE_ECHO_INPUT); 
    if (! SetConsoleMode(hStdin, fdwMode))  
    {
        MessageBox(NULL, "SetConsoleMode", "Console Error", MB_OK); 
        return;
    }


}

//get a character from serial port
char halGetch(void){
	
	return ((char) getchar());
}

ZBOOL halGetchRdy(void){
	//this does not work with CONSOLE IO under WIN32.
	//just return true all of the time
	return(TRUE);
}

//write a character to serial port
// Uses UART initialized by halInitUart

void halPutch(char c){
	putchar(c); //char does not appear on console until '\r' is sent
}

void halRawPut(char c) {
    DWORD bytes_written;
	WriteFile(hStdout,&c,1,&bytes_written,0);
}
#endif




void halInitMACTimer(void) {
	ZBOOL x;
	x = QueryPerformanceFrequency(&lpFrequency);
	if (x == FALSE){
		printf("High Performance Counter not supported\n");
	}
	else{
		printf("High Performance Counter is supported\n");
		tics_per_second = lpFrequency.LowPart;
	}
}


//assuming 2.4GHz, so 1 symbol = 16 us
UINT32 sym_to_ticks(UINT32 x){
	double fticks;
	UINT32 rval;
	fticks = (1.0/(LRWPAN_SYMBOLS_PER_SECOND) * ((float)tics_per_second))*x;
	//printf("Symbols: %u, Tics per second: %u, fticks:%f\n",
	//	x,tics_per_second,fticks);

	rval = (UINT32) fticks;
	return(rval);
}

//this is inaccurate since there is less than one symbol per MAC tic
//under WIN32
UINT32 sym_per_mac_tick(void){
	double symbols_per_tick;
	UINT32 rval;

    symbols_per_tick = 1.0 /((1.0/(LRWPAN_SYMBOLS_PER_SECOND) * ((float)tics_per_second)));
    rval = (UINT32) symbols_per_tick;
	if (!rval)rval++;  //don't return 0
	return(rval);     
}

UINT32 msecs_to_ticks(UINT32 x){
    double fsecs,fticks;
	UINT32 rval;

	fsecs = ((float)x)/1000;
	fticks = fsecs * tics_per_second;
	rval = (UINT32) fticks;
	return(rval);
	
}

UINT32 halMacTicksToUs(UINT32 x){
	double usecs;
	UINT32 rval;

	usecs = (((float)x)/((float)tics_per_second)) * 1000000;
	rval = (UINT32) usecs;
	return(rval);
}



UINT32 halGetMACTimer(void){
	LARGE_INTEGER timecnt;
	UINT32 x;

	QueryPerformanceCounter(&timecnt);
	x =  timecnt.LowPart;

	return x;
}

#if 0
UINT32 halMACTimerNowDelta(UINT32 x) {
return(((halGetMACTimer()-(x))& MACTIMER_MAX_VALUE));

}

UINT32 halMACTimerNowDelta_dbg(UINT32 x) {
	UINT32 p,q,y;

	p = halGetMACTimer();
	q = p - x;
	y = q & MACTIMER_MAX_VALUE;

   
    return(y);
}
#endif


void halUtilMemCopy(BYTE *dst, BYTE *src, BYTE len) {
	while (len) {
		*dst = *src;
		dst++;src++;
		len--;
	}
}

//this function is used to generate random byte!--li
UINT8 halGetRandomByte(void) {
	LARGE_INTEGER timecnt;
	UINT32 x;

	QueryPerformanceCounter(&timecnt);
	x =  timecnt.LowPart;
	return((UINT8)x);
}

LRWPAN_STATUS_ENUM halInitRadio(PHY_FREQ_ENUM frequency, BYTE channel, RADIO_FLAGS radio_flags)
{
	if ((channel < 11) || (channel > 26)) {
		printf("Error in halInitRadio, invalid channel: %d\n",channel);
		return(LRWPAN_STATUS_PHY_FAILED);
	}
	current_channel = channel;
	local_radio_flags = radio_flags;
	radio_state = RADIO_STATE_ON;
	block_radio_rx = FALSE;
	
	return(LRWPAN_STATUS_SUCCESS);
}

void halDisableRadio(void){
  block_radio_rx = TRUE;
  radio_state = RADIO_STATE_OFF;
}

void halShutdown(void) {
 halDisableRadio();
}

//nothing to do
void halWarmstart(void) {}

LRWPAN_STATUS_ENUM halSetChannel(BYTE channel){
  current_channel = channel;
  return(LRWPAN_STATUS_SUCCESS);
}


LRWPAN_STATUS_ENUM halSendPacket(BYTE flen, BYTE *frm)
{
	BYTE tmpbuf[LRWPAN_MAX_FRAME_SIZE+1];  //maximum payload size
	BYTE *ptr;
	
	if ((flen+2) > LRWPAN_MAX_FRAME_SIZE) {
		printf("Error in halSendPacket, frame size: %d exceeds max size: %d\n",
			flen, LRWPAN_MAX_FRAME_SIZE);
		return LRWPAN_STATUS_PHY_TX_START_FAILED;
	}

	//format the packet in the same way as it sits in RXFIFO. 
	//First byte is length that does not include lenght byte
	ptr = &tmpbuf[0];
	*ptr = flen+2; //length does not include length byte
	ptr++;
	//copy frame
	memcpy(ptr,frm,flen);
	ptr = ptr+flen;
	//set frame check sequence
	*ptr = util_get_rssi(); //dummy RSSI
	ptr++;
    *ptr = util_get_CRC(); //CRC byte
	ptr = &tmpbuf[1];
    DEBUG_STRING(DBG_INFO,"TXing packet\n"); 
	DEBUG_PRINTPACKET(DBG_INFO, ptr, flen+2);
	//now transmit the packet
	ptr = &tmpbuf[0];
    DoSharedMemTxRx(FALSE, ptr, flen+2+1);
	///macTxCallback();  //do MAC TX callback
	///phyTxEndCallBack();
	Sleep(0);  //sleep for a bit to allow other process to read it
	return(LRWPAN_STATUS_SUCCESS);
}

void halGetProcessorIEEEAddress(BYTE *buf) {

	buf[0] = aExtendedAddress_B0;
	buf[1] = aExtendedAddress_B1;
	buf[2] = aExtendedAddress_B2;
	buf[3] = aExtendedAddress_B3;
	buf[4] = aExtendedAddress_B4;
	buf[5] = aExtendedAddress_B5;
	buf[6] = aExtendedAddress_B6;
	buf[7] = aExtendedAddress_B7;

}



void halIdle(void) {

}

void halSetRadioPANID(UINT16 panid){ 
	radio_panid = panid;
}
void halSetRadioShortAddr(SADDR saddr){
	radio_saddr = saddr;
}

void halSleep(UINT32 msecs) {
	//sleep for this number of milliseconds
	Sleep(msecs);
}

void halWaitMs(UINT32 msecs){
	UINT32 this_timer;
	this_timer = halGetMACTimer();
	while (halMACTimerNowDelta(this_timer) < MSECS_TO_MACTICKS(msecs));
}


void halSuspend(UINT32 msecs) {
	//sleep for this number of milliseconds
	Sleep(msecs);
}



void phyTxStartCallBack(void)
{
 
}