target.c

一个电力系统谐波检测的程序

/****************************************Copyright (c)**************************************************
**                               Guangzou ZLG-MCU Development Co.,LTD.
**                                      graduate school
**                                 http://www.zlgmcu.com
**
**--------------File Info-------------------------------------------------------------------------------
** File name:			target.c
** Last modified Date:	2004-09-17
** Last Version:		1.0
** Descriptions:		header file of the specific codes for LPC2100 target boards
**						Every project should include a copy of this file, user may modify it as needed
**------------------------------------------------------------------------------------------------------
** Created by:			Chenmingji
** Created date:		2004-02-02
** Version:				1.0
** Descriptions:		The original version
**
**------------------------------------------------------------------------------------------------------
** Modified by:			Chenmingji
** Modified date:		2004-09-17
** Version:				1.01
** Descriptions:		Renewed the template, added more compiler supports 
**
**------------------------------------------------------------------------------------------------------
** Modified by: 
** Modified date:
** Version:	
** Descriptions: 
**
********************************************************************************************************/

#define IN_TARGET

 
#include "config.h"


 void init_port(void)
 {

 //port initialized
  //PINSEL0=0x00000000;
  IO0DIR |=SCLK;
  IO0DIR |=SDIN;
  IO0DIR |=LCD_DC;
  IO1DIR |=LCD_CE;
  IO0DIR |=LCD_RST;						
  IO1DIR |=(1<<25);	//设置LED控制口为输出	  
  IO1DIR |=(1<<23);	//设置LCD_LED控制口为输出	   

 }
  //extern  void SP_Init(void);
  void  HC165_HC595_init(void)
  {
  PINSEL1|=(2<<2);//设置 LED的SPI时钟功能 口
  PINSEL1|=(2<<6);//设置 LED的MOSI数据 发送功能 口
  PINSEL1|=(2<<4);//set 74HC165   MISO
  IO1DIR |=HC595_CS;//
  IO0DIR |=HC165_SH_LD;
  SSP_Init();
  }

 
/*********************************************************************************************************
** Function name:			IRQ_Exception
**
** Descriptions:			interrupt exceptional handler , change it as needed
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
        void IRQ_Exception(void)
{
    while(1);                   // change it to your code  这一句替换为自己的代码
}

/*********************************************************************************************************
** Function name:			FIQ_Exception
**
** Descriptions:			Fast interrupt exceptional handler , change it as needed
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
        void FIQ_Exception(void)
{
    while(1);                   // change it to your code  这一句替换为自己的代码
}
/*********************************************************************************************************
** Function name:			Timer0_Exception
**
** Descriptions:			Timer0 interrupt service function
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
        void Timer0_Exception(void)
{
    T0IR = 0x01;
    VICVectAddr = 0;            //interrupt close 通知中断控制器中断结束
    OSTimeTick();
}

/*********************************************************************************************************
** Function name:			Timer0Init
**
** Descriptions:			Initialize the Time0
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
        void Timer0Init(void)
{
    T0IR = 0xffffffff;
    T0TC = 0;
    T0TCR = 0x01;
    T0MCR = 0x03;
    T0MR0 = (Fpclk / OS_TICKS_PER_SEC);
 }
/*********************************************************************************************************
** Function name:			VICInit
**
** Descriptions:			Initialize the Interrupt Vevtor Controller
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
        void VICInit(void)
{
    extern void IRQ_Handler(void);
    extern void Timer0_Handler(void);

    VICIntEnClr = 0xffffffff;
    VICDefVectAddr = (uint32)IRQ_Handler;

    VICVectAddr0 = (uint32)Timer0_Handler;
    VICVectCntl0 = (0x20 | 0x04);
    VICIntEnable = 1 << 4;
 }

/*********************************************************************************************************
** Function name:			TargetInit
**
** Descriptions:			Initialize the target board; it is called in a necessary place, change it as 
**							needed
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
        void TargetInit(void)
{
    OS_ENTER_CRITICAL();
    srand((uint32) TargetInit);
    VICInit();
    Timer0Init();
 	init_port();
	HC165_HC595_init();
	AD_INIT();
 
    OS_EXIT_CRITICAL();
}
/*********************************************************************************************************
** Function name:			InitialiseUART0
**
** Descriptions:			Initialize the Uart0
**
** input parameters:		None
** Returned value:			None
**         
** Used global variables:	None
** Calling modules:			None
**
** Created by:				Chenmingji
** Created Date:			2004/02/02
**-------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
**------------------------------------------------------------------------------------------------------
********************************************************************************************************/
        void InitialiseUART0(uint32 bps)
{  	
    uint16 Fdiv;
    IO0DIR |=1<<31;
	IO0CLR |=1<<31;
    PINSEL0  |=0x05;    /* Select the pins for Uart 选择管脚为UART0 */