wmpower.h

pxa270平台 windows mobile 5.2 wm9713 触摸屏+音频驱动

/*-----------------------------------------------------------------------------
 * Copyright (c) Wolfson Microelectronics plc.  All rights reserved.
 *
 * This software as well as any related documentation is furnished under 
 * license and may only be used or copied in accordance with the terms of the 
 * license. The information in this file is furnished for informational use 
 * only, is subject to change without notice, and should not be construed as 
 * a commitment by Wolfson Microelectronics plc. Wolfson Microelectronics plc
 * assumes no responsibility or liability for any errors or inaccuracies that
 * may appear in this document or any software that may be provided in
 * association with this document. 
 *
 * Except as permitted by such license, no part of this document may be 
 * reproduced, stored in a retrieval system, or transmitted in any form or by 
 * any means without the express written consent of Wolfson Microelectronics plc. 
 *
 * $Id: WMPower.h 3998 2006-10-03 13:00:37Z fb $
 *
 * This file contains functionality for controlling power on wolfson codecs.
 *
 * Warning:
 *  This driver is specifically written for Wolfson Codecs. It is not a 
 *  general CODEC device driver.
 *
 *---------------------------------------------------------------------------*/
#ifndef __WMPOWER_H__
#define __WMPOWER_H__

/*
 * Include files
 */
#include "WMTypes.h"

/*
 * Definitions
 */

/*
 * Power codes for powering up and off different sections.
 */
typedef unsigned short WM_POWERFLAG;
#define WM_POWER_ALL                0xFFFF
#define WM_POWER_NONE               0x0000

#define WM_POWER_LINK               0x0001

/* Audio sections */
#define WM_POWER_AUDIO              0x0FFE
#define WM_POWER_CLOCK              0x0002
#define WM_POWER_MIXERS             0x0004
#define WM_POWER_VREF               0x0008
#define WM_POWER_AUDIO_HIFI_ADC     0x0010
#define WM_POWER_AUDIO_HIFI_DAC_L   0x0020
#define WM_POWER_AUDIO_HIFI_DAC_R   0x0040
#define WM_POWER_AUDIO_VOICE_DAC    0x0080
#define WM_POWER_AUDIO_MONO_DAC     0x0100
#define WM_POWER_OUTPUTS            0x0200
#define WM_POWER_INPUTS             0x0400
#define WM9712_POWER_OUT2           WM_POWER_MIXERS

#define WM_POWER_AUDIO_HIFI_DAC     ( WM_POWER_AUDIO_HIFI_DAC_L | \
                                      WM_POWER_AUDIO_HIFI_DAC_R )
#define WM_POWER_AUDIO_ADCS         WM_POWER_AUDIO_HIFI_ADC
#define WM_POWER_AUDIO_ADC          WM_POWER_AUDIO_ADCS     /* Deprecated should use WM_POWER_AUDIO_HIFI_ADCS */
#define WM_POWER_AUDIO_DACS         ( WM_POWER_AUDIO_HIFI_DAC  | \
                                      WM_POWER_AUDIO_VOICE_DAC | \
                                      WM_POWER_AUDIO_MONO_DAC )
#define WM_POWER_AUDIO_DAC          WM_POWER_AUDIO_DACS     /* Deprecated should use WM_POWER_AUDIO_DACS */

#define WM_POWER_AUDIO_FAST     ( WM_POWER_MIXERS    | \
                                  WM_POWER_AUDIO_ADC | \
                                  WM_POWER_AUDIO_DAC | \
                                  WM_POWER_INPUTS    | \
                                  WM_POWER_OUTPUTS )

#define WM_POWER_AUDIO_PLAYBACK   ( WM_POWER_MIXERS     | \
                                    WM_POWER_AUDIO_DACS | \
                                    WM_POWER_INPUTS     | \
                                    WM_POWER_OUTPUTS )

#define WM_POWER_AUDIO_RECORD     ( WM_POWER_MIXERS     | \
                                    WM_POWER_AUDIO_ADCS | \
                                    WM_POWER_INPUTS     | \
                                    WM_POWER_OUTPUTS )

/* Touch and ADC sections */
#define WM_POWER_AUXADC_DIGITISER 0x1000
#define WM_POWER_PEN_DETECT       0x2000
#define WM_POWER_PEN_DETECTED     0x4000

#define WM_POWER_AUXADC           WM_POWER_AUXADC_DIGITISER
#define WM_POWER_TOUCH            (WM_POWER_AUXADC | WM_POWER_PEN_DETECT | WM_POWER_PEN_DETECTED)

/*
 * Power Reg defines
 */
#define PWR_REG_1   0
#define PWR_REG_2   1
#define PWR_REG_3   2
#define PWR_REG_4   3

/*
 * Function prototypes
 */
#ifdef __cplusplus
extern "C" {
#endif

/*-----------------------------------------------------------------------------
 * Function:    WMPowerInit
 *
 * Initalise the driver in a low power state.
 *
 * Parameters:
 *      hDevice             handle to the device (from WMOpenDevice)
 *      driverId            The device ID (e.g. WM_DRIVER_TOUCH)
 *
 * Returns:     WMSTATUS
 *        See WMStatus.h.
 *---------------------------------------------------------------------------*/
WMSTATUS WMPowerInit( WM_DEVICE_HANDLE  hDevice,
                      WM_DRIVER_ID      driverId
                    );

/*-----------------------------------------------------------------------------
 * Function:    WMPowerUp
 *
 * Called to power up the specific sections of the chip on behalf of this
 * driver.
 *
 * Parameters:
 *      hDevice             handle to the device (from WMOpenDevice)
 *      driverId            The driver ID (e.g. WM_DRIVER_TOUCH)
 *      powerSections       The sections to power up.
 *
 * Returns:     WMSTATUS
 *      See WMStatus.h.
 *---------------------------------------------------------------------------*/
WMSTATUS WMPowerUp( WM_DEVICE_HANDLE  hDevice,
                    WM_DRIVER_ID      driverId,
                    WM_POWERFLAG      powerSections
                  );

/*-----------------------------------------------------------------------------
 * Function:    WMPowerDown
 *
 * Called to power down the specific sections of the chip on behalf of this
 * driver.  Note if the driver can tell that the sections are still in use
 * by another driver they will not actually be powered down.
 *
 * Parameters:
 *      hDevice             handle to the device (from WMOpenDevice)
 *      driverId            The driver ID (e.g. WM_DRIVER_TOUCH)
 *      powerSections       The sections to power down.
 *
 * Returns:     WMSTATUS
 *      See WMStatus.h.
 *---------------------------------------------------------------------------*/
WMSTATUS WMPowerDown( WM_DEVICE_HANDLE    hDevice,
                      WM_DRIVER_ID        driverId,
                      WM_POWERFLAG        powerSections
                    );

/*-----------------------------------------------------------------------------
 * Function:    WMGetCurrentPowerState
 *
 * Returns the current power state - either cached or by looking at the register.
 *
 * Parameters:
 *      hDevice             handle to the device (from WMOpenDevice)
 *
 * Returns:     WM_POWERFLAG
 *      The current power state.
 *---------------------------------------------------------------------------*/
WM_POWERFLAG WMGetCurrentPowerState( WM_DEVICE_HANDLE hDevice );

/*-----------------------------------------------------------------------------
 * Function:    calcPowered
 *
 * Works out what should currently be powered up, based on what all the drivers
 * are requesting and the various dependencies.
 * 
 * NB This function only makes sense if we have global data pointer.
 *
 * Parameters:
 *      hDevice             handle to the device (from WMOpenDevice)
 *      driverId            The device ID (e.g. WM_DRIVER_TOUCH)
 *      powerUp             The sections to power up.
 *      powerDown           The sections to power down.
 *      pCurrentPower       A pointer to receive the current power state.
 *
 * Returns:     WM_POWERFLAG
 *  The bitmask describing the sections which should be powered up.
 *---------------------------------------------------------------------------*/
WM_POWERFLAG calcPowered( WM_DEVICE_HANDLE   hDevice,
                          WM_DRIVER_ID       driverId,
                          WM_POWERFLAG       powerUp,
                          WM_POWERFLAG       powerDown,
                          WM_POWERFLAG       *pCurrentPower
                        );

#ifdef __cplusplus
}   /* extern "C" */
#endif

#endif  /* __WMPOWER_H__ */
/*------------------------------ END OF FILE ---------------------------------*/